Scribd
Upload
87 views

Uwosecure v2

The document provides instructions for connecting a device to the uwosecure-v2 wireless network at Western University. It involves navigating settings menus to select the uwosecure-v2 network, configure EAP-PEAP and EAP-MSCHAPv2 authentication with a Western username and password, and enabling the Thawte Premium Server CA certificate. Once completed, the device can connect to the uwosecure-v2 wireless network.

Uploaded by

George Zhao
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
87 views

Uwosecure v2

The document provides instructions for connecting a device to the uwosecure-v2 wireless network at Western University. It involves navigating settings menus to select the uwosecure-v2 network, configure EAP-PEAP and EAP-MSCHAPv2 authentication with a Western username and password, and enabling the Thawte Premium Server CA certificate. Once completed, the device can connect to the uwosecure-v2 wireless network.

Uploaded by

George Zhao
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

1) Push the 

Menu  button, and then select Tools, and then Settings application.

2) Select the Connection menu, and then select Access Points.

3) Select Options, then choose New Access Point, and select Use default settings.

4) Enter the following settings for the connection:

 Connection name: uwosecure-v2
 Data bearer: Wireless LAN

 WLAN netw. name: Enter manually -> uwosecure-v2

 Network status: Public

 WLAN netw. mode: Infrastructure

 WLAN security mode: WPA/WPA2

 Homepage: http://www.google.com
5) Click on the WLAN security setting menu and ensure that WPA mode is set to EAP, WPA2only mode
set to OFF. Now open the EAP plug-in settings menu.

6) You will now be presented with a list of EAP protocols. Only EAP-PEAP should be enabled and moved to
the top of the list. (Select EAP-PEAP in the list, push Options and then Enable. Then, use Raise Priority to
move it to the top of the list). All other protocols should be disabled.
7) Now select EAP-PEAP, push Options, and then select Configure. Enter the following settings for EAP-
PEAP:

 User certificate: (not defined)


 CA certificate: Thawte Premium Server CA

 User name in use:User-configured

 User name: [enter your uwo Username, exclude @uwo.ca]

 Realm in use: User-configured

 Realm: [leave blank]

 Allow PEAPv0: Yes

 Allow PEAPv1: No

 Allow PEAPv2: No
8) Now go Right to select the EAP tab. Only EAP-MSCHAPv2 should be enabled and moved to the top of
the list. (Select EAP-MSCHAPv2 in the list, push Options and then Enable. Then, use Raise Priority to
move it to the top of the list). All other protocols should be disabled.

9) Now select EAP-MSCHAPv2, push Options, and then select Configure. Enter the following settings for
EAP-MSCHAPv2:

 User name: [enter your CWL Username]


 Prompt password: No

 Password: [enter your CWL Password]

10) Now push Back until you are at the Standby screen. You are now able to connect to the
uwosecure-v2 wireless network.

You might also like