Scribd
Upload
208 views

About The Smart Boot Manager Image

The Smart Boot Manager (SBM) allows booting from CD-ROMs on older PCs by bypassing BIOS limitations. The sbm.bin file provided can be used to create a SBM floppy disk image, which will then detect the CD-ROM and boot the operating system even if the BIOS does not directly support booting from CD. SBM includes an IDE driver to boot CDs on machines with incompatible BIOSes and can also be used when isolinux fails to boot directly from the first CD. To create the SBM floppy, use sbm.bin with rawrite under DOS or dd under Linux.

Uploaded by

Raynmune Corp
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
208 views

About The Smart Boot Manager Image

The Smart Boot Manager (SBM) allows booting from CD-ROMs on older PCs by bypassing BIOS limitations. The sbm.bin file provided can be used to create a SBM floppy disk image, which will then detect the CD-ROM and boot the operating system even if the BIOS does not directly support booting from CD. SBM includes an IDE driver to boot CDs on machines with incompatible BIOSes and can also be used when isolinux fails to boot directly from the first CD. To create the SBM floppy, use sbm.bin with rawrite under DOS or dd under Linux.

Uploaded by

Raynmune Corp
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

About the Smart Boot Manager image

----------------------------------

The file `sbm.bin' that is available in this directory may be useful


to you if you are not able to directly boot the first CD because your
BIOS may be too old and may not support ISOLINUX.

Then, instead of booting on the CD directly, you create a Smart Boot


Manager floppy image by using the sbm.bin disk image. You can create this
floppy with rawrite (under DOS) or with dd (under Linux). Now you can
boot on this floppy disk and it will detect your CDROM and let you boot
on it bypassing any BIOS limitation.

What is SBM ?

Smart Boot Manager or briefly SmartBtmgr (SBM), is an OS independent


Boot Manager - a program that is loaded by the bios before any
operating system and allows you to choose which operating system to
boot.

SBM is included in Debian in two ways, the package bmconf allows us to


install and configure an old version of SBM and sbm wich is the latest
version of SBM with an installer.

What's the use of SBM on the CD then ?

SBM includes an IDE driver that allows us to boot the cds even on
machines with a BIOS that wouldn't support booting from CD, provided our
CDROM is an IDE one, that is, so you can make a SBM floppy and boot from
it and then tell it to boot from your CDROM.

Also, there are some cases where the BIOS would allow booting from the CD
but isolinux fails to boot from there, in this case you can either boot
using a CD other than the first, as the others don't use isolinux, or you
can make a SBM floppy and boot from this floppy and then tell SBM to boot
your CDROM.

How do you make a SBM floppy ?

If you have SBM installed on a box you can run sbminst. Otherwise you can
put the sbm.bin floppy image that we provide with our cds onto a floppy
just like you would do with a rescue image.

You might also like