Scribd
Upload
7K views

Dished Ends Types

The document provides technical specifications for different types of dished ends labeled A through I. For each type, the specifications include dimensional requirements for parameters like diameter (D), radius (R), inner radius (r), head thickness (h), and skirt thickness (s). Common across many types are constraints on D ranging from 500-5000, R as a function of D, h being at least 5 times s, and maximum thickness of 8 mm when D is 500-800.

Uploaded by

s.vijayaraghavan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7K views

Dished Ends Types

The document provides technical specifications for different types of dished ends labeled A through I. For each type, the specifications include dimensional requirements for parameters like diameter (D), radius (R), inner radius (r), head thickness (h), and skirt thickness (s). Common across many types are constraints on D ranging from 500-5000, R as a function of D, h being at least 5 times s, and maximum thickness of 8 mm when D is 500-800.

Uploaded by

s.vijayaraghavan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DISHED ENDS TYPE A DISHED ENDS TYPE C

Technical and dimensional specifications


Technical and dimensional specifications
D r h s
D R s
150÷5000 2xD 3 ÷ 40 500 ÷ 5000 D/10 ≥5xs 3 ÷ 22
1,5 x D
1xD When D = 500 ÷ 800 maximum thickness is 8 mm.
0,8 x D
SV D x 1,09 + 2h
R = 1,5 D
Sv D x 1,015 Ht D x 0,1 + h + s
Ht D x 0,075 + S
R= D DISHED ENDS TYPE D
SV D x 1,09
Ht D x 0,140 + S

| TYPE A |DISHED ENDS TYPE B

Small hnuchle radius dished heads


Technical and dimensional specifications
D R r h s

500 ÷ 3050 1,5 ÷ 2 D 50 ≥5xs 3 ÷ 25


Technical and dimensional specifications

D r h s 3100 ÷ 3450 1,5 ÷ 2 D 80 ≥5xs 3 ÷ 25

500 ÷ 5000 50 ≥5xs 3 ÷ 22 3500 ÷ 5000 1,5 ÷ 2 D 100 ≥5xs 3 ÷ 25

When D = 500 ÷ 800 maximum thickness is 8 mm. When D = 500 ÷ 800 maximum thickness is 8 mm.

SV D + 50 + 2h SV D x 1,03 + 2h
Ht D x 0,09 + h + s
Ht 50 + h + s
DISHED ENDS TYPE DE DISHED ENDS TYPE F

Technical and dimensional specifications


D R r h s
500 ÷ 5000 D 50 ≥5xs 3 ÷ 22
When D = 500 ÷ 800 maximum thickness is 8 mm. Semielliptical Heads
DISHED ENDS TYPE E Technical and dimensional specifications
D R r h s

500 ÷ 4000 0,8 x D D/6,5 ≥5xs 3 ÷ 22

When D = 500 ÷ 800 maximum thickness is 8 mm.

SV D x 1,16 + 2h
Torispherical Heads
Technical and dimensional specifications Ht D x 0,25 + h + s

D R r h s DISHED ENDS TYPE G


320 ÷ 5000 D D/10 ≥5xs 3 ÷ 25

When D = 500 ÷ 800 maximum thickness is 8 mm.


SV D x 1,11 + 2h
Ht D x 0,194 + h + s

DISHED ENDS TYPE I


Technical and dimensional specifications
D R r h s
on
500 ÷ 5000 D 50 3 ÷ 22
request
When D = 500 ÷ 800 maximum thickness is 8 mm.

Technical and dimensional specifications


D R ht h s d
500 ÷ max on
D/10 ≥5xs 3 ÷ 22
3000 1100 request

You might also like