Scribd
Upload
252 views

Byte Blaster MV

The document provides a diagram and description of an Altera ByteBlaster MV cable. The cable contains 25 pins that connect a target device under test to a host computer. It includes signal pins for programming and debugging the target device such as TCK, TMS, TDI, and TDO. Resistors are used for termination of the signals.

Uploaded by

Dinh Thang Le
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
252 views

Byte Blaster MV

The document provides a diagram and description of an Altera ByteBlaster MV cable. The cable contains 25 pins that connect a target device under test to a host computer. It includes signal pins for programming and debugging the target device such as TCK, TMS, TDI, and TDO. Resistors are used for termination of the signals.

Uploaded by

Dinh Thang Le
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Altera ByteBlaster MV cable

U1
RS14 100 S9 2 18 S12
P1 S14 TDO 4 1A1 1Y1 16 S11
1 PS 6 1A2 1Y2 14 S13
14 8 1A3 1Y3 12
2 RS2 100 S2 S2 11 1A4 1Y4 9 TCK
15 RU15 S3 13 2A1 2Y1 7 TMS
VCC 2A2 2Y2
3 S3 S8 15 5 TDI
16 17 2A3 2Y3 3 TCK R1
4 RS3 100 2A4 2Y4 1
100
17 1
5 S14 19 1G TMS R3
18 2G 5
100
6
74HC244 R5
19 TDI
7 S2 RP2 9
100
20
8 R8S 100 S8
2k2
TDO R2
21 S3 RP3 3
9 R9S 100 S9
100
2k2 C1 R4
22 PS
10 S8 RP8 7
100
23
11 R11S 100 S11
2k2
24 S9 RP9 100n 2, 10 - GND
12 R12S 100 S12 4 - VCC
2k2
25
13 R13S S13 S14 RP14
VCC
100 2k2
CONNECTOR DB25

All series resistors are 100 Ohm


All pull-up resistors are 2k2

You might also like