Scribd
Upload
44 views

MFLRFO78FSCTAPA100

7 / 8" flexible Aluminium cable is manufactured with smooth copper tube as inner conductor and outer corrugated Aluminium conductor. The inner conductor is insulated with foam dielectric having high degree of foaming. The cable is jacketed with Black LDPE jacketing compound to impart protection against UV rays.

Uploaded by

microqual
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views

MFLRFO78FSCTAPA100

7 / 8" flexible Aluminium cable is manufactured with smooth copper tube as inner conductor and outer corrugated Aluminium conductor. The inner conductor is insulated with foam dielectric having high degree of foaming. The cable is jacketed with Black LDPE jacketing compound to impart protection against UV rays.

Uploaded by

microqual
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

7/8” FLEX ALUMINIUM FEEDER CABLE

Description : The 7/8” flexible Aluminium cable is manufactured with smooth copper tube as inner conductor and outer
corrugated Aluminium conductor to give a very high degree of flexibility to the cable. The inner conductor is insulated with
foam dielectric having high degree of foaming. The cable is jacketed with Black LDPE jacketing compound to impart
protection against UV rays.

Inner Smooth Copper Tube


LDPE + HDPE Foam Insulation
Outer Corrugated Aluminium Conductor
Jacket

Product Code : MFLRF078FSCTAPA100


Mechanical Parameters

Inner Conductor Smooth Copper Tube 9.40 +/- 0.1 mm


Dielectric Foam Dielectric 23.2 +/-0.2 mm
Diameter Over Outer Conductor Corrugated Copper Tape 25.3 +/- 0.2 mm
Diameter Over Outer Jacket PE 27.6 +/- 0.3 mm
Cable Weight 380 kg/km
Tensile Strength 1500 N
Minimum Bending Radius , Single Turn 120
Minimum Bending Radius , Repeated 250
Number of Bends , Minimum (Typical) 15 (50)
Bending Moment 15 Nm
Flat Plate Crush Strength 1.1 Kg/mm
Recommended Hanger Spacing 1.0 m
Installation Temperature Range -40 to + 60 Deg C
Operating Temperature Range -55 to + 85 Deg C
Storage Temperature Range -70 to + 85 Deg C

Electrical Parameters
Impedance 50 +/- 1 Ω Frequency Attenuation Mean Power
Relative Velocity of Propagation90% MHz dB/100 M Rating
Insulation Resistance > 10,000 MΩ.k.m 100 1.26 8.41
Capacitance 75.5 pF/m 200 1.80 5.88
Inductance 0.175 µH/m 300 2.22 4.77
Maximum Operating Frequency5.0 GHz 400 2.58 4.11
Cut Off Frequency 5.3 Ghz 450 2.75 3.85
Peak Power Rating 90 600 3.19 3.32
DC Break Down Voltage 6000 V 700 3.47 3.05
Jacket Spark , Volts RMS 8000 800 3.72 2.85
Inner Conductor DC Resistance 1.13 Ω/1000m 890 3.95 2.68
Outer Conductor DC Resistance1.18 Ω/1000m 960 4.10 2.58
1000 4.19 2.53
Return Loss 800 – 1000 MHz26 dB 1500 5.22 2.03
Return Loss 1700 – 2200 MHz26 dB 1700 5.59 1.89
Return Loss 2200 – 2700 MHz26 dB 1800 5.76 1.84
2000 6.11 1.73
VSWR 800 – 1000 MHz 1.10 2100 6.27 1.69
VSWR 1700 – 2200 MHz 1.10 2200 6.44 1.64
VSWR 2200 – 2700 MHz 1.10 2300 6.59 1.61
2500 6.92 1.53
2700 7.25 1.46
3000 7.65 1.38

# Attenuation at 20 Deg C
# #Attenuation values are exclusive of connector loss
Rev date : 01/09/2010

You might also like