Scribd
Upload
138 views1 page

Standart Tap & Drill

This document provides specifications for various metric thread sizes including the basic thread diameter, major thread diameter, and recommended drill bit sizes for tapping holes. It lists specifications for metric thread sizes from M1.6 to M27 in two column format.

Uploaded by

Sahril Hj Solehan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
138 views1 page

Standart Tap & Drill

This document provides specifications for various metric thread sizes including the basic thread diameter, major thread diameter, and recommended drill bit sizes for tapping holes. It lists specifications for metric thread sizes from M1.6 to M27 in two column format.

Uploaded by

Sahril Hj Solehan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Thread Basic Tap

Size* Major Drill Size**


Diameter
M1.6x0.35 0.063 1.25mm or #55
M2x0.4 0.0787 1.60mm or #52
M2.5x0.45 0.0984 2.05mm or #46
M3x0.5 0.1181 2.50mm or #39
M3.5x0.6 0.1378 2.90mm or #32
M4x0.7 0.1575 3.30mm or #30
M5x0.8 0.1969 4.20mm or #19
M6x1 0.2362 5.00mm or #8
M8x1.25 0.315 6.8mm or H
M8x1 0.315 7.00mm or J
M10x1.5 0.3937 8.50mm or R
M10x1.25 0.3937 8.80mm or 11/32
M12x1.75 0.4724 10.20mm or 13/32
M12x1.25 0.4724 10.80mm or 27/64
M14x2 0.5512 12.00mm or 15/32
M14x1.5 0.5512 12.50mm or 1/2
M16x2 0.6299 14.00mm or 35/64
M16x1.5 0.6299 14.50mm or 37/64
M18x2.5 0.7087 15.50mm or 39/64
M18x1.5 0.7087 16.50mm or 21/32
M20x2.5 0.7874 17.50mm or 11/16
M20x1.5 0.7874 18.50mm or 47/64
M22x2.5 0.8661 19.50mm or 49/64
M22x1.5 0.8661 20.50mm or 13/16
M24x3 0.9449 21.00mm or 53/64
M24x2 0.9449 22.00mm or 7/8
M27x3 1.063 24.00mm or 15/16
M27x2 1.063 25.00mm or 1

You might also like