Scribd
Upload
593 views

P400 Hi-Fi Audio Amplifier

The P400 is a high-end audio power amplifier capable of delivering 382W per channel into an 8 ohm load with a frequency range of 5-100,000Hz and damping factor greater than 150. It has a dual mono design with independent power supplies of ±68V DC and protection circuits to prevent damage from overheating, DC offset, or signal clipping. Key components include MOSFET output transistors, high power resistors and capacitors, and protection circuits using BJTs and LED indicators. It is suitable for high quality audio systems powered by a 24V DC regulated power supply.

Uploaded by

Hari Harjono
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
593 views

P400 Hi-Fi Audio Amplifier

The P400 is a high-end audio power amplifier capable of delivering 382W per channel into an 8 ohm load with a frequency range of 5-100,000Hz and damping factor greater than 150. It has a dual mono design with independent power supplies of ±68V DC and protection circuits to prevent damage from overheating, DC offset, or signal clipping. Key components include MOSFET output transistors, high power resistors and capacitors, and protection circuits using BJTs and LED indicators. It is suitable for high quality audio systems powered by a 24V DC regulated power supply.

Uploaded by

Hari Harjono
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 8

P400 hi-fi high end audio power amplifier

 
 
 

P400 caracteristic
 

Sinus power: 382W (per chanal 8 load


impedance)

Load impedance: 2-16

Frequency ranges: 5-100000Hz

Frequency range: 10-40000Hz (-1dB)

Damping factor: >150

Input impedance: 60K

Power supply:  68V DC

Power consumption: 10-450W

Protection characteristic
 

Impendance: 2 x 47K

DC time detection: 200ms

DC detection: 1V

Wait interval: 5s

Power supply: 24V DC

 
Schematic diagram of amplifier

Layout of main board


Schematic diagram of speaker protection and anticlick circuit

Layout of protection

Suitable power source for amplifier

 
 

Components
 

P400 MAIN BOARD


 
RESISTORS

0   4 R10, R11, R14, R15  

0.39 4W 4 R33, R34, R39, R40  

4.7 1/4W 3 R31, R32, RPP2  

10 1/4W 2 R41, R42  

100 (10K ) 1/4W 3 R2, R4, R5  


*

130 1/4W 2 R27, R29  

150 1/4W 3 R18, R24, R26  

220 1/4W 3 R28, R30, RPP1  

270 1/4W 4 R35, R36, R37, R38  

330 1/4W 2 R19, R25  

1K 1/8W 1 R22  

1K 1/8W 2 R3, R21  

1K5 1/8W 4 R8, R9, R16, R17  

2K2 1/8W 1 R20  

5K6 1/8W 1 R23  

10K 1/8W 1 R1  

33K 1/8W 2 R12, R13  

100K 1/8W 2 R6, R7  

CAPACITORS

-   2 C7, C8  

15p 160V 1 C6  

50p 160V 2 C2, C3  


200p 160V 2 C13, C14  

.04u 160V 1 C4  

0.1u 160V 1 C9  

1u 16V 1 C1  

100u 35V 1 C5  

COILS

2.2uH   1 L  

SEMICONDUCTORS

BA157   2 D1, D2  

2N5401 TO-39 3 Q3, Q4, Q5  

2N5550 TO-39 3 Q1, Q2, Q7  

BC546 TO-39 2 Q6, Q8  

BC556 TO-39 1 Q9  

TIP41C TO-220 1 Q10  

TIP42C TO-220 1 Q11  

MJ15003 TO-3 2 Q13  

MJ15004 TO-3 2 Q15  

SPEAKER PROTECTION
 

RESISTORS

-   1 R10  

-   1 RSTAB  

470   1 R8  
1k   2 R4,R9  

2k2   1 RLED  

8k2   1 R7  

10k   1 R3  

15k   1 R6  

100k   2 R1,R2  

1M2   1 R5  

CAPACITORS

10u   2 C3,C4  

220u   2 C1,C2  

SEMICONDUCTORS

BA157   4 D1,D2,D3,D4  

BC183 TO-39 4 T1,T2,T4,T5  

BC212 TO-39 1 T3  

24v TO-220 1 STAB  

You might also like