MERCER VALVE

9100 SERIES
Threaded

THINK...MERCER FIRST™

9100 Threaded Brochure 2-08.indd1 1 4/14/08 9:15:23 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

9100 Series Threaded

Product Overview

The Mercer Valve 9100 Series Pressure Relief

Valve is “State of the Art” in soft seat, high
flow rate, pressure relieving devices. The 9100
Series is a continuation of the 8100 Series,
incorporating our patented Auto Seat Tech-
nology® into its design. Mercer Valve’s Auto
Seat Technology® has made the 9100 Series
an industry leader with its reliable, repeatable
set pressures. The patented soft seat design
and fully guided disk allow the valve to continu-
ally outlast the competition. The soft seat 9100
Series has a field-proven lip seal design, which
allows for a tighter seal up to set pressure. This
tight seal reduces leaks and limits product loss.

The 9100 Series is manufactured in accordance with the requirements of ASME Boiler and Pressure
Vessel Code, Section VIII, Division 1 for Air/Gas and Liquid service. The 9100 Series is well suited for specialty
gases, compressors, separators, transmission, gathering lines and other production processes.

9100 Series Threaded Features

• Designed with Auto Seat Technology®.

• Consistent Set Pressures allowing repeatable uses without repair or resetting.
• Open, Close, Seat and Seal™.
• Fully guided disk keeps the disk properly alligned, opening and closing, helping to reseat
the valve.
• Mechanical Stop prevents wear on parts and controls valve lift.
• Low rated and fully guided spring allows for more consistent set pressures from pop
to pop.
• Pop Action relief allows valve to go to full lift at set pressure. Helps with DOT regulated
applications.
• Built in accordance with the requirements of ASME Boiler and Pressure Vessel Code.
Sec. VIII Div 1.
• Non-rising stems allowing valves to be installed in small areas.

2 www.mercervalve.net • 1.800.833.6402

9100 Threaded Brochure 2-08.indd2 2 4/14/08 9:15:26 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

9100 Series Threaded Specifications

Orifice Letter C D E F G H J K

Standard Inlet 1/2”, 3/4”, 3/4”, 1” 3/4”, 1” 1 1/2”, 2” 1 1/2”, 2” 1 1/2”, 2” 2”, 3” 3”
Sizes 1”

Inlet and Outlet

Connection
Male NPT x Female NPT or Female NPT x Female NPT
Types Available

Actual Orifice .281 .394 .520 .655 .775 1.050 1.350 1.625
Diameter (in)

Actual Orifice
.062 .122 .212 .337 .472 .865 1.430 2.074
Area (in2)

API Orifice - - - .110 .196 .307 .503 .785 1.287 1.838

Area (in2)

Pressure
Ranges (psi) 15 to 2999 15 to 2999 15 to 2400 15 to 2400 15 to 2000 15 to 2000 15 to 800 15 to 750

Standard
Temperature -20 to 400 -20 to 400 -20 to 400 -20 to 400 -20 to 400 -20 to 400 -20 to 400 -20 to 400
Range (ºF)

ASME Flow
Coefficient, .818 .818 .818 .818 .818 .818 .818 .818
Kd (Gas)
ASME Flow
Coefficient, .707 .707 .707 .707 .707 .707 .707 .707
Kd (Liquid)

NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.

www.mercervalve.net • 1.800.833.6402 3

9100 Threaded Brochure 2-08.indd3 3 4/14/08 9:15:28 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

9100 Series Threaded Parts and Materials

15
14
13
12
11
10
9
8
7
6
5
4
3
2
1

9100 SERIES THREADED C , D , & E ORIFICES

ITEM NO PART NAME STANDARD MATERIALS

1 INLET BASE CARBON STEEL
2 BASE SEAL SOFT STEEL
3 NOZZLE O-RING VITON
4 NOZZLE SUBASSEMBLY STAINLESS STEEL WITH SOFT SEAT
5 DISK SUBASSEMBLY STAINLESS STEEL
6 BODY SUBASSEMBLY CARBON STEEL
7 SET SPRING STAINLESS STEEL
8 ADJUSTMENT SCREW STAINLESS STEEL
9 ADJUSTMENT BUSHING STAINLESS STEEL
10 CENTER BUSHING STAINLESS STEEL
11 ADJUSTMENT SCREW O-RING BUNA N
12 CENTER BUSHING O-RING BUNA N
13 WASHER CARBON STEEL
14 LOCKNUT CARBON STEEL
15 CLOSED CAP ALUMINUM ALLOY
NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.

4 www.mercervalve.net • 1.800.833.6402

9100 Threaded Brochure 2-08.indd4 4 4/14/08 9:15:30 AM

 MERCER VLVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

15
14
13
12
11
10
9
8
7
6
5
4
3
2
1

9100 SERIES THREADED F & G ORIFICES

ITEM NO PART NAME STANDARD MATERIALS

1 INLET BASE CARBON STEEL
2 BASE SEAL SOFT STEEL
3 NOZZLE O-RING VITON
4 NOZZLE SUBASSEMBLY STAINLESS STEEL WITH SOFT SEAT
5 DISK SUBASSEMBLY STAINLESS STEEL
6 BODY SUBASSEMBLY CARBON STEEL
7 SET SPRING STAINLESS STEEL
8 ADJUSTMENT SCREW STAINLESS STEEL
9 ADJUSTMENT BUSHING STAINLESS STEEL
10 CENTER BUSHING STAINLESS STEEL
11 CENTER BUSHING O-RING BUNA N
12 CENTERNUT CARBON STEEL
13 ADJUSTMENT SCREW O-RING BUNA N
14 LOCKNUT CARBON STEEL
15 CLOSED CAP ALUMINUM ALLOY
NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.

www.mercervalve.net • 1.800.833.6402 5

9100 Threaded Brochure 2-08.indd5 5 4/14/08 9:15:34 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

13

12

11

10

8
7

4
3
2
1

9100 SERIES THREADED H ORIFICE

ITEM NO PART NAME STANDARD MATERIALS

1 BODY SUBASSEMBLY CARBON STEEL
2 NOZZLE O-RING VITON
3 NOZZLE SUBASSEMBLY STAINLESS STEEL WITH SOFT SEAT
4 DISK SUBASSEMBLY STAINLESS STEEL
5 SET SPRING STAINLESS STEEL
6 BONNET O-RING BUNA N
7 BONNET CARBON STEEL
8 ADJUSTMENT BUSHING STAINLESS STEEL
9 ADJUSTMENT SCREW STAINLESS STEEL
10 ADJUSTMENT SCREW O-RING BUNA N
11 WASHER CARBON STEEL
12 LOCKNUT CARBON STEEL
13 CLOSED CAP ALUMINUM ALLOY

NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.

6 www.mercervalve.net • 1.800.833.6402

9100 Threaded Brochure 2-08.indd6 6 4/14/08 9:15:37 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

14
13
12
11
10
9
8
7
6
5
4
3
2
1

9100 SERIES THREADED J & K ORIFICES

ITEM NO PART NAME STANDARD MATERIALS

1 BODY SUBASSEMBLY CARBON STEEL
2 NOZZLE O-RING VITON
3 NOZZLE SUBASSEMBLY STAINLESS STEEL WITH SOFT SEAT
4 DISK SUBASSEMBLY STAINLESS STEEL
5 SET SPRING STAINLESS STEEL
6 BONNET O-RING BUNA N
7 BONNET BOLTS ALLOY STEEL
8 ADJUSTMENT SCREW STAINLESS STEEL
9 ADJUSTMENT BUSHING STAINLESS STEEL
10 BONNET SUBASSEMBLY CARBON STEEL
11 ADJUSTMENT SCREW O-RING BUNA N
12 WASHER CARBON STEEL
13 LOCKNUT CARBON STEEL
14 CLOSED CAP ALUMINUM ALLOY

NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.

www.mercervalve.net • 1.800.833.6402 7

9100 Threaded Brochure 2-08.indd7 7 4/14/08 9:15:41 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

INLET AND DIMENSIONS APPROX.

OUTLET ORIFICE PRESSURE “A” X “B” X “C” WEIGHT
CODE INLET AND OUTLET SIZE AVAILABLE LIMIT (psi) (IN.) + 1/16 (lbs.)

05 1/2” FNPT x 1” FNPT C 15 - 2999 2-1/4 x 1-7/8 x 7-1/16 4.5

06 1/2” MNPT x 1” FNPT C 15 - 2999 3-1/4 x 1-7/8 x 8 4.5
11 3/4” FNPT x 1” FNPT C , D 15 - 2999 2-1/4 x 1-7/8 x 7-1/16 4.5
11 3/4” FNPT x 1” FNPT E 15 - 2400 2-1/4 x 1-7/8 x 7-1/16 4.5
12 3/4” MNPT x 1” FNPT C , D 15 - 2999 3-1/4 x 1-7/8 x 8 4.5
12 3/4” MNPT x 1” FNPT E 15 - 2400 3-1/4 x 1-7/8 x 8 4.5
16 1” FNPT x 1” FNPT C , D 15 - 2999 3-1/4 x 1-7/8 x 8 4.5
16 1” FNPT x 1” FNPT E 15 - 2400 3-1/4 x 1-7/8 x 8 4.5
17 1” MNPT x 1” FNPT C , D 15 - 2999 3-1/4 x 1-7/8 x 8 4.5
17 1” MNPT x 1” FNPT E 15 - 2400 3-1/4 x 1-7/8 x 8 4.5
22 1” FNPT x 1 1/2” FNPT C , D 15 - 2999 3-3/8 x 2-3/8 x 9 10.5
22 1” FNPT x 1 1/2” FNPT E 15 - 2400 3-3/8 x 2-3/8 x 9 10.5
23 1” MNPT x 1 1/2” FNPT C , D 15 - 2999 4-1/2 x 2-3/8 x 9-5/8 11
23 1” MNPT x 1 1/2” FNPT E 15 - 2400 4-1/2 x 2-3/8 x 9-5/8 11
27 1” FNPT x 2” FNPT C , D 15 - 2999 3-3/8 x 2-3/8 x 9 10.5
27 1” FNPT x 2” FNPT E 15 - 2400 3-3/8 x 2-3/8 x 9 10.5
28 1” MNPT x 2” FNPT C , D 15 - 2999 4-1/2 x 2-3/8 x 9-5/8 11
28 1” MNPT x 2” FNPT E 15 - 2400 4-1/2 x 2-3/8 x 9-5/8 11
33 1 1/2” FNPT x 2” FNPT F 15 - 2400 4-5/8 x 2-3/8 x 10-5/16 11.5
33 1 1/2” FNPT x 2” FNPT G 15 - 2000 4-5/8 x 2-3/8 x 10-5/16 11.5
34 1 1/2” MNPT x 2” FNPT F 15 - 2400 4-7/16 x 2-3/8 x 10-1/16 11
34 1 1/2” MNPT x 2” FNPT G 15 - 2000 4-7/16 x 2-3/8 x 10-1/16 11
33 1 1/2” FNPT x 2” FNPT H 15 - 850 3 x 3 x 10-3/4 22
34 1 1/2” MNPT x 2” FNPT H 15 - 850 4-1/4 x 3 x 12 22.5
42 2” FNPT x 2” FNPT F 15 - 2400 4-5/8 x 2-3/8 x 10-5/16 12
42 2” FNPT x 2” FNPT G 15 - 2000 4-5/8 x 2-3/8 x 10-5/16 12
43 2” MNPT x 2” FNPT F 15 - 2400 4-7/16 x 2-3/8 x 10-1/16 12
43 2” MNPT x 2” FNPT G 15 - 2000 4-7/16 x 2-3/8 x 10-1/16 12
42 2” FNPT x 2” FNPT H 15 - 850 3 x 3 x 10-3/4 22
43 2” MNPT x 2” FNPT H 15 - 850 4-1/4 x 3 x 12 23
46 2” FNPT x 2 1/2” FNPT H 15 - 850 3 x 3 x 10-3/4 22
46 2” FNPT x 2 1/2” FNPT H 851 - 2000 3 x 3 x 13-1/8 28
47 2” MNPT x 2 1/2” FNPT H 15 - 850 4-1/4 x 3 x 12 23
47 2” MNPT x 2 1/2” FNPT H 851 – 2000 4-1/4 x 3 x 14-1/2 29

8 www.mercervalve.net • 1.800.833.6402

9100 Threaded Brochure 2-08.indd8 8 4/14/08 9:15:42 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

INLET AND DIMENSIONS APPROX.

OUTLET ORIFICE PRESSURE “A” X “B” X “C” WEIGHT
CODE INLET AND OUTLET SIZE AVAILABLE LIMIT (psi) (IN.) + 1/16 (lbs.)

51 2” FNPT x 3” FNPT J 15 – 450 3-3/4 x 4-1/4 x 11-3/4 41

51 2” FNPT x 3” FNPT J 451 – 800 3-3/4 x 4-1/4 x 15-5/16 52
52 2” MNPT x 3” FNPT J 15 – 450 5-1/2 x 4-1/4 x 13-3/8 42
52 2” MNPT x 3” FNPT J 451 – 800 5-1/2 x 4-1/4 x 17-1/16 53
61 3” MNPT x 3” FNPT J 15 – 450 5-1/2 x 4-1/4 x 13-1/2 44
61 3” MNPT x 3” FNPT J 451 – 800 5-1/2 x 4-1/4 x 17-1/4 55
61 3” MNPT x 3” FNPT K 15 – 285 5-1/2 x 4-1/4 x 13-1/2 46
61 3” MNPT x 3” FNPT K 286 - 750 5-1/2 x 4-1/4 x 17-1/4 57
NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.

www.mercervalve.net • 1.800.833.6402 9

9100 Threaded Brochure 2-08.indd9 9 4/14/08 9:15:45 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

CAPACITY IN SCFM OF AIR AT 60ºF AND STD ATMOSPHERIC CONDITIONS

Set

Pressure C D E F G H J K
(psi) 0.062 0.122 0.212 0.337 0.472 0.865 1.43 2.074
15 30 60 104 165 231 424 701 1017
20 35 69 120 191 267 489 808 1172
25 40 78 136 216 302 554 916 1328
30 44 87 152 241 338 619 1023 1483
50 65 128 222 352 493 904 1495 2168
75 90 178 309 491 688 1261 2084 3023
100 116 228 396 630 883 1617 2674 3878
125 141 278 484 769 1077 1974 3264 4733
150 167 329 571 908 1272 2331 3853 5589
200 218 429 746 1186 1661 3044 5033 7299
300 320 631 1096 1742 2440 4471 7391 10720
400 423 832 1445 2298 3218 5898 9750 14141
500 525 1033 1795 2854 3997 7324 12109 17562
600 627 1234 2145 3409 4775 8751 14467 20983
700 730 1435 2494 3965 5554 10178 16826 24403
800 832 1637 2844 4521 6332 11605 19185
900 934 1838 3194 5077 7111 13031
1000 1036 2039 3544 5633 7889 14458
1100 1139 2240 3893 6189 8668 15885
1250 1292 2542 4418 7022 9836 18025
1500 1548 3045 5292 8412 11782 21592
2000 2059 4051 7040 11191 15675 28726
2400 2468 4856 8439 13415
2600 2673 5259
2800 2877 5661
2999 3081 6062

10 www.mercervalve.net • 1.800.833.6402

9100 Threaded Brochure 2-08.indd10 10 4/14/08 9:15:46 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

CAPACITY IN SCFM OF 0.6 SG NATURAL GAS AT 60ºF AND STD ATMOSPHERIC CONDITIONS
Set

Pressure C D E F G H J K
(psi) 0.062 0.122 0.212 0.337 0.472 0.865 1.43 2.074
15 38 75 130 206 289 529 875 1269
20 44 86 150 238 333 610 1008 1463
25 50 97 169 269 377 691 1142 1657
30 55 109 189 301 421 772 1276 1851
50 81 159 276 439 615 1128 1864 2704
75 113 222 385 613 858 1573 2600 3771
100 145 285 495 786 1101 2018 3336 4838
125 177 347 604 959 1344 2463 4071 5905
150 208 410 713 1133 1587 2908 4807 6972
200 272 536 931 1480 2072 3798 6278 9105
300 400 787 1367 2173 3043 5577 9220 13373
400 527 1038 1803 2866 4015 7357 12163 17640
500 655 1289 2239 3560 4986 9137 15105 21908
600 782 1540 2676 4253 5957 10917 18048 26175
700 910 1791 3112 4947 6928 12697 20990 30443
800 1038 2042 3548 5640 7899 14477 23932
900 1165 2293 3984 6333 8871 16256
1000 1293 2544 4420 7027 9842 18036
1100 1420 2795 4857 7720 10813 19816
1250 1612 3171 5511 8760 12270 22486
1500 1931 3799 6602 10494 14698 26935
2000 2568 5054 8783 13961 19554 35835
2400 3079 6058 10527 16735
2600 3334 6560
2800 3589 7062
2999 3843 7562

www.mercervalve.net • 1.800.833.6402 11

9100 Threaded Brochure 2-08.indd11 11 4/14/08 9:15:48 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

CAPACITY IN MMSCFD OF 0.6 SG NATURAL GAS AT 60ºF AND STD ATMOSPHERIC CONDITIONS
Set

Pressure C D E F G H J K
(psi) 0.062 0.122 0.212 0.337 0.472 0.865 1.43 2.074
15 0.05 0.11 0.19 .030 0.42 0.76 1.26 1.83
20 0.06 0.12 0.22 0.34 0.48 0.88 1.45 2.11
25 0.07 0.14 0.24 0.39 0.54 0.99 1.64 2.39
30 0.08 0.16 0.27 0.43 0.61 1.11 1.84 2.66
50 0.12 0.23 0.40 0.63 0.89 1.62 2.68 3.89
75 0.16 0.32 0.56 0.88 1.24 2.26 3.74 5.43
100 0.21 0.41 0.71 1.13 1.59 2.91 4.80 6.97
125 0.25 0.50 0.87 1.38 1.94 3.55 5.86 8.50
150 0.30 0.59 1.03 1.63 2.28 4.19 6.92 10.04
200 0.39 0.77 1.34 2.13 2.98 5.47 9.04 13.11
300 0.58 1.13 1.97 3.13 4.38 8.03 13.28 19.26
400 0.76 1.49 2.60 4.13 5.78 10.59 17.51 25.40
500 0.94 1.86 3.22 5.13 7.18 13.16 21.75 31.55
600 1.13 2.22 3.85 6.12 8.58 15.72 25.99 37.69
700 1.31 2.58 4.48 7.12 9.98 18.28 30.23 43.84
800 1.49 2.94 5.11 8.12 11.38 20.85 34.46
900 1.68 3.30 5.74 9.12 12.77 23.41
1000 1.86 3.66 6.37 10.12 14.17 25.97
1100 2.05 4.02 6.99 11.12 15.57 28.54
1250 2.32 4.57 7.94 12.62 17.67 32.38
1500 2.78 5.47 9.51 15.11 21.17 38.79
2000 3.70 7.28 12.65 20.10 28.16 51.60
2400 4.43 8.72 15.16 24.10
2600 4.80 9.45
2800 5.17 10.17
2999 5.53 10.89

12 www.mercervalve.net • 1.800.833.6402

9100 Threaded Brochure 2-08.indd12 12 4/14/08 9:15:50 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

CAPACITY IN GPM WATER AT 60ºF AND STD ATMOSPHERIC CONDITIONS

Set

Pressure C D E F G H J K
(psi) 0.062 0.122 0.212 0.337 0.472 0.865 1.43 2.074
15 7 14 24 38 54 99 163 236
20 8 16 27 43 61 111 184 267
25 9 17 30 48 67 123 203 295
30 10 19 33 52 73 133 221 320
50 12 24 42 67 94 172 285 413
75 15 30 52 82 115 211 349 506
100 17 34 60 95 133 244 403 584
125 20 38 67 106 149 272 450 653
150 21 42 73 116 163 299 493 716
200 25 49 84 134 188 345 570 826
300 30 60 103 164 230 422 698 1012
400 35 69 119 190 266 487 806 1169
500 39 77 134 212 297 545 901 1307
600 43 84 146 233 326 597 987 1431
700 46 91 158 251 352 645 1066 1546
800 49 97 169 269 376 689 1140
900 52 103 179 285 399 731
1000 55 109 189 300 421 771
1100 58 114 198 315 441 808
1250 62 122 211 336 470 862
1500 68 133 231 368 515 944
2000 78 154 267 425 595 1090
2400 86 168 293 465
2600 89 175
2800 92 182
2999 96 188

www.mercervalve.net • 1.800.833.6402 13

9100 Threaded Brochure 2-08.indd13 13 4/14/08 9:15:52 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

9100 Series Threaded Product Numbering System

91 - 17 D 5 1

VALVE SERIES
91 – 9100 Series

INLET & OUTLET

COMBINATION
(See Selection Table
on pages 8 & 9)

ORIFICE SIZE
C to K

INLET BASE
& BODY MATERIAL
5 – CARBON STEEL/WCB
CARBON STEEL

6 – 316 STNLS STL/WCB

CARBON STEEL

7 – 316 STNLS STL/CF3M

STAINLESS STEEL

CAP TYPE
1 – CLOSED CAP
2 – OPEN LIFT LEVER
3 – CLOSED LIFT LEVER
4 – CLOSED CAP W/STAINLESS STEEL BONNET (H - K ORIFICE)
5 – OPEN LIFT LEVER W/STAINLESS STEEL BONNET (H - K ORIFICE)
6 – CLOSED LIFT LEVER W/STAINLESS STEEL BONNET (H - K ORIFICE)

CONSULT FACTORY FOR

ADDITIONAL INFORMATION
AND OPTIONS

NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.

14 www.mercervalve.net • 1.800.833.6402

9100 Threaded Brochure 2-08.indd14 14 4/14/08 9:15:54 AM

 MERCER VALVE COMPANY, INC.
Auto Seat Technology®
9100 SERIES THREADED SAFETY RELIEF VALVES

V 06 I 1

2 – DIGIT “SPECIAL” CODE

(IF APPLICABLE ASSIGNED BY MERCER)

O-RING MATERIAL
1 – STANDARD O-RINGS
(VITON & BUNA-N)

TRIM CODES
U – 316 S.S. DISK & NOZZLE (STD GAS
SERVICE F,G,H,J,&K ORIFICES)*

I – 17-4 S.S. DISK & NOZZLE (STD GAS

SERVICE D&E ORIFICES)

C – 440C S.S. DISK, 17-4 S.S. NOZZLE

(STD GAS SERVICE C ORIFICE AND
HIGH PRESSURE F,G,H,)*

L – LIQUID SERVICE 316 S.S. DISK &

NOZZLE

N – SOUR GAS SERVICE 316 S.S. DISK &

NOZZLE

B – SOUR LIQUID SERVICE 316 S.S. DISK

& NOZZLE

SPRING CODE
(ASSIGNED BY MERCER)

SEAT MATERIAL
V – VITON 90 DURO
* = U TRIM CODE CHANGES TO C TRIM CODE AT T – 15% GLASS FILLED TEFLON
F > 1399psi, G > 1199psi, H > 1049psi P – VIRGIN PEEK

www.mercervalve.net • 1.800.833.6402 15

9100 Threaded Brochure 2-08.indd15 15 4/14/08 9:15:56 AM

 9100 SERIES CATALOG
CORPORATE HEADQUARTERS
9609 NW 4th STREET
OKLAHOMA CITY, OK 73127
1-800-833-6402
PHONE: (405) 495-6533, FAX: (405) 495-8728
[email protected]

HOUSTON BRANCH OFFICE

6218 LONG DRIVE
HOUSTON, TX 77087
1-866-833-6402
PHONE: (713) 242-6960, FAX: (713) 242-6963
[email protected]

CALGARY BRANCH OFFICE

#203, 2835 23rd St. NE
CALGARY, ALBERTA T2E 7A4
PHONE: (403) 250-5557, FAX: (403) 250-5661
[email protected]

BRIDGEPORT, TX BRANCH OFFICE

5758 US Highway 380
BRIDGEPORT, TX 76426-6421
1-866-683-9002
PHONE: (940) 683-9002, FAX: (940) 683-9004
[email protected]

CHICAGO BRANCH OFFICE

CUSTOMER RELATIONS DEPARTMENT
P.O. Box 597
Libertyville, IL 60048
1-800-833-6402
[email protected]

WWW.MERCERVALVE.NET

MVC91THD REVISION DATE: 2/08 SUPERCEDES 1/07

9100 Threaded Brochure 2-08.indd16 16 4/14/08 9:15:58 AM