Scribd
Upload
1K views

OBDII Pinouts

The document provides pinout diagrams for the OBDII diagnostic port for Volkswagen, BMW, and Mercedes vehicles. It lists the pin number, signal name, and description for each pin. Common pins include power (BATT+), ground (GND), and the two CAN bus lines (CAN_H and CAN_L) that are used for vehicle diagnostics communication. The pinouts differ between manufacturers in the specific signals and modules assigned to each pin for diagnostic access.

Uploaded by

mahi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

OBDII Pinouts

The document provides pinout diagrams for the OBDII diagnostic port for Volkswagen, BMW, and Mercedes vehicles. It lists the pin number, signal name, and description for each pin. Common pins include power (BATT+), ground (GND), and the two CAN bus lines (CAN_H and CAN_L) that are used for vehicle diagnostics communication. The pinouts differ between manufacturers in the specific signals and modules assigned to each pin for diagnostic access.

Uploaded by

mahi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

OBDII Pinouts.

Source: http://pinoutsguide.com/CarElectronics/
OBDII Pinout VAG.

Pin Signal Description


1 T5 Terminal 5
2 J1850 Bus + Not Used / reserved for other standards
3 N/A Not Used
4 CGND Chassis Ground (Terminal 31)
5 SGND Signal Ground (Terminal 31)
6 CAN_H Diagnosis CAN High
7 K-LNE ISO 9141-2 and ISO/DIS 14240-4 Communication Line.
8 N/A Not Used
9 N/A Not Used
10 J1850 Bus - Not Used / reserved for other standards
11 N/A Not Used
12 N/A Not Used
13 N/A Not Used
14 CAN_L Diagnosis CAN Low
nd
15 L-LINE ISO 9141-2 and ISO/DIS 14230-4 2 communication line
16 BATT + +12v Battery Power (terminal 30)
OBDII Pinout BMW.

Pin Signal Description


1 ERS Engine Rotation Speed (TD)
2 OBDII-Diag OBDII Diagnostic
7 O&I Reset Oil service and Inspection Reset
11 ESTO External Starter Turn On
14 BATT + +12v Battery Power
15 L-LINE ISO 9141-2 L-line (RXD Diagnostic Data Link)
16 Ign +12v +12v Ignition power
17 K-LINE ISO 9141-2 K-line (n/c?)
18 PGSP Programming Line
19 GND - Ground Line
20 K-LINE ISO 9141-2 (TXD Diagnostic Data Link)
OBDII Pinout Mercedes (models after 2000).

Pin Signal Description


1 K-LINE Ignition control (EZS), air-conditioner(KLA), PTS, Safety systems (Airbag, SRS, AB)
3 TNA TD Engine rotation speed
4 GND - Ground Line
5 GND - Ground Line
6 CAN_H CAN High (including airbag system in: W203, W209, W220, W240, R230)
7 K-LINE Engine Control Diagnostics (ME/MSM/CDI)
8 IGN +12v Ignition power
9 K-LINE ABS, ASR, ESP, ETS, BAS diagnostics
11 K-LINE Gearbox and other transmission components (EGS, ETC, FTC) diagnistics
12 K-LINE All Activity module (AAM), Radio (RD), ICS, etc
13 K-LINE AB Diagnostics (safety systems)
14 CAN_L CAN Low diagnostics data link
15 K-LINE IC, KI, TAU, LWR Diagnostics
16 BATT + +12v Battery power

You might also like