Scribd
Upload
46 views

Compare Spec Line Pipe-1

This document summarizes specifications for line pipe and notes requested changes. It includes 5 items: [1] using non-sour service instead of sour service pipe; [2] accepting past weldability tests instead of new tests for pipe using Grade X42 steel; [3] changing the process of manufacture to ERW instead of SAWL; [4] checking the wall thickness tolerance as it may not conform to API-5L Table; [5] ensuring the chemical composition and mechanical properties accord with API-5L Grade X42 PSL2. The document provides commentary from "CK" on requested changes to the specifications for a PTT project.

Uploaded by

ruckma999
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
46 views

Compare Spec Line Pipe-1

This document summarizes specifications for line pipe and notes requested changes. It includes 5 items: [1] using non-sour service instead of sour service pipe; [2] accepting past weldability tests instead of new tests for pipe using Grade X42 steel; [3] changing the process of manufacture to ERW instead of SAWL; [4] checking the wall thickness tolerance as it may not conform to API-5L Table; [5] ensuring the chemical composition and mechanical properties accord with API-5L Grade X42 PSL2. The document provides commentary from "CK" on requested changes to the specifications for a PTT project.

Uploaded by

ruckma999
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Compare Spec (Line Pipe)

Refersd
# Page Specification (Burton) Comment by CK
Specification NO.

Document no. SP-D-1010.01-1000-00o6 Revision.A

1.1 API 5L SUPPLEMENTARY

1 REQUIREMENTS 3 The Iine pipe shall used for sour service We can change to Non Sour Service ?

Proof of weld ability tests shall be performed in

1.9 accordance with the requirements of Appendix N Past weldability test shall be acceptable imstead

2 Weidability 4 to this specification of performing new test (We use Gr.X42)

Change to ERW, Because processof manalfacture

3 2.1 Process of manufacture 4 The pipe shall be SAWL. SAWL shall be apply to size 16" and more

4.1 This tolerance is not conform API-5L Table ?

4 Wall Thickness 11 The wall thickness minus tolerance shall be 0% Please Check!

3.1 Shall Accordance to API 5L X42 PSL2


5 Chemical Composit 8 Please Check!

3.2
Mechanical Properties 9
As per PTT requirement
we have to use sour
service

Weldabilty test to be
done as per PTT DCM

Accepted

This is inline with PTT


specification

PSL 2 shall be followed

You might also like