Scribd
Upload
32 views

DCG Cut Sheet

This document provides information on a ditch cleaning and grading bucket (DCG). It lists its recommended applications as ditch maintenance, construction, grading, and slope work, but not for tough digging. The bucket has no teeth for grading and finishing, tapered side plates, and standard drainage holes. It is constructed of high strength steel in high wear components, with a rigid top channel and bottom wear straps for reinforcement. Optional additions include a bolt-on cutting edge, extra drainage holes, and special designs/larger capacities available via quote. Sizes range from mini excavators to backhoes.

Uploaded by

Shawn Hess
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views

DCG Cut Sheet

This document provides information on a ditch cleaning and grading bucket (DCG). It lists its recommended applications as ditch maintenance, construction, grading, and slope work, but not for tough digging. The bucket has no teeth for grading and finishing, tapered side plates, and standard drainage holes. It is constructed of high strength steel in high wear components, with a rigid top channel and bottom wear straps for reinforcement. Optional additions include a bolt-on cutting edge, extra drainage holes, and special designs/larger capacities available via quote. Sizes range from mini excavators to backhoes.

Uploaded by

Shawn Hess
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DDIITTCCHH CCLLEEAANNIINNGG && GGRRAADDIINNGG BBUUCCKKEETT ((DDCCGG))

RECOMMENDED APPLICATIONS
• DITCH MAINTENANCE
• CONSTRUCTION
• GRADING
• SLOPE WORK
• NOT FOR TOUGH DIGGING

FEATURES
• NO TEETH FOR GRADING AND FINISHING
• TAPERED SIDE PLATES
• STANDARD DRAINAGE HOLES IN EXCAVATOR CLASS SIDE CUTTER CHANNEL

QUALITY CONSTRUCTION
• HIGH STRENGTH STEEL IS UTILIZED
IN ALL HIGH WEAR COMPONENTS
• RIGID TOP CHANNEL ASSURES
STRUCTURAL STABILITY
• BOTTOM WEAR STRAPS PROVIDE
EXTRA REINFORCING

ADDITIONAL OPTIONS
• BOLT ON CUTTING EDGE
OPTIONAL (SHOWN IN PICTURES) OPTIONAL BOLT ON EDGE
• EXTRA DRAINAGE HOLES
• SPECIAL DESIGNS AND CAPACITIES AVAILABLE UPON QUOTE
• ADDITIONAL ADD-ONS AVAILABLE UPON QUOTE
Ditching & Grading Bucket Ditching & Grading Bucket
Part Bucket Capacity Part Bucket Capacity
Mini Excavators Number Width Rated Number Width Rated
Long
2,150-4,900 Lbs 76MNDCG 24"-48" 3.00-7.00 Reach DCG**.** 48"-60" 0.64-0.82
5,000-11,000 Lbs 1MNDCG 24"-48" 4.25-8.50 12 Ton DCG**.** 60"-72" 1.02-1.22
7,500-11,000 Lbs 2MNDCG 30"-48" 6.00-9.80 15 Ton DCG**.** 60"-72" 1.02-1.22
11,000-14,000 Lbs 3MNDCG 36"-54" 8.00-14.10 20 Ton DCG**.** 48"-72" 0.79-1.22
14,000-16,000 Lbs 4MNDCG 36"-60" 11.70-19.80 25 Ton DCG**.** 48"-72" 1.08-1.77
16,000-25,000 Lbs 5MNDCG 42"-72" 15.60-27.50 30 Ton DCG**.** 54"-72" 1.53-2.09
BackHoes 35 Ton DCG**.** 54"-78" 1.67-2.79
Univ 1,2 Stand BH DCG--.-- 30"-60" 7.8-21.6 40 Ton DCG**.** 60"-84" 2.01-2.89
Univ 5, 19 ft BH 5MNDCG 42"-72" 15.60-27.50 50 Ton DCG**.** 60"-84" 2.40-3.81

You might also like