Scribd
Upload
73 views2 pages

Axis Controller Inspection List

This document is an inspection checklist for testing an Axis Controller. It lists test criteria such as checking wiring, labels, and mounting. Tests include visual inspections, ensuring screws are tight, and verifying correct non-metal parts. Paperwork is also checked, such as file names matching the product number. No individual part numbers are assigned, only cable naming is used. The checklist is signed off by the tester, approver, and authorized shipper once inspection is complete.

Uploaded by

Betur Sheetal
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
73 views2 pages

Axis Controller Inspection List

This document is an inspection checklist for testing an Axis Controller. It lists test criteria such as checking wiring, labels, and mounting. Tests include visual inspections, ensuring screws are tight, and verifying correct non-metal parts. Paperwork is also checked, such as file names matching the product number. No individual part numbers are assigned, only cable naming is used. The checklist is signed off by the tester, approver, and authorized shipper once inspection is complete.

Uploaded by

Betur Sheetal
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Product title Axis Controller Tester Date 08/11/10

Product Serial Number


Product Model Number

Y N Y N
Nordson Non Traditional Acceptance

INSPECTION CHECK LIST


Indicate whether following Test has passed
Test Criteria Y N Inspection Date
Visual Inspection of the unit wiring
Check Whether the Jacket is flexible with cable
Check whether Terminal block screws were tight
Check whether the Indicating light is tight with
terminal
Check whether the non metal screws & nuts used to
connect bases were correct
Check whether the mounting holes were mounted
correctly
A non-metal washer and large metal flat washer
were applied correctly as per requirement
Check whether supply input label and two GMEG
labels were added as per requirement
Check whether wire numbers at all wire
terminations, including the connector inserts have
been added.
Check all related file names to include the GMEG
number
No part Numbers are
assigned to it. Only
naming of the cable is
Check whether Nordson part number detail for done and been updated
cable identification in the documents.
Check whether Start-up screen to include GMEG This program is for
number Complete Axis
Controller system, so
no particular part
number is assigned in
program .
Non-metal screws and nuts should not be used to
secure connector bases. Screws and nuts should be
steel and should not make contact with the metal
connector base
Check storage and maintaining of the test
equipment files and information
Remarks:

Y N Y N Y N
Released for Tested By Approved By
Shipment
Rakesh /Joseph Robinson Lakshmi/SheetalBetur Dinesh Pai

Tested and Inspected By Approved by Authorized for Shipment


Date Date

You might also like