Scribd
Upload
2K views4 pages

WheelHorse Snow Blower Lift Assist Accessory 8-4311

This document provides parts and installation instructions for a lift accessory kit for snow throwers. It lists the compatible snow thrower models and includes diagrams of the kit components. The instructions explain that the kit reduces lift force effort by 50% and describe attaching one end of the spring to the frame and the other end to an eyebolt on the lift arm.

Uploaded by

Kevins Small Engine and Tractor Service
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views4 pages

WheelHorse Snow Blower Lift Assist Accessory 8-4311

This document provides parts and installation instructions for a lift accessory kit for snow throwers. It lists the compatible snow thrower models and includes diagrams of the kit components. The instructions explain that the kit reduces lift force effort by 50% and describe attaching one end of the spring to the frame and the other end to an eyebolt on the lift arm.

Uploaded by

Kevins Small Engine and Tractor Service
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

PARTS LIST AND INSTRUCTIONS

LIFT ACCESSORY
MODEL

WHEELHORSE PRODUCTS, INC. • SOUTH BEND, IND. 8-4311

DESCRIPTION INSTALLATION INSTRUCTION


The Lift Accessory is used on the tractor Snow Remove the lift arm from the Snow Thrower lift
Throwers as a lift arm assist. It will reduce to lift tube and replace with the lift arm provided. Hook
force effort needed by approximately 50%. one end of the spring on the frame cross arm and
It fits on the following Snow Throwers: 5T-323, the other end in the eye bolt, (see illustration).
5T-324, 5T-325, 6-2211, 6-3211, 5T-376, and Basic Thread the nut on the eye bolt until 1" of thread
Units 6-6211 and 6-6212. is exposed above the nut.
PARTS LIST 8-4311
When ordering parts always list Part No. and name of part.
Parts available only through Authorized Dealers.
(Specifications su&;ec, '0 change without no'ice.J

Item Part No. Item Part No.


No. scription No. No. R

lod 3 100077
2 9 915663· op %-16
'"
LITHO II FORM NO. A·
PARTS LIST AND INSTRUCTIONS
SPRING ASSIST LIFT KIT
FACTORY ORDER NUMBER 8·4311
for
SNOW THROWERS

DESCRIPTION INSTALLATION INSTRUCTIONS


Remove the lift arm from the snow thrower lift
This lift kit is used on tractor snow throwers as a tube and replace with the lift rod assembly provided.
lift arm assist. It will reduce the lift force effort Hook one end of the spring over the frame cross arm
required by approximately 50%. and the other through the eyebolt, taking care to
place the spring so the hook ends point down (see
This kit is for 1975 snow throwers 6.0202, 6-621.4, photo). Insert the threaded end of the eyebolt in the
and the following prior models: 5T -323, 5T -324, hole provided and secure with- the nut. Thread the
5T-325, 5T-376, 6-0201, 6-2211, 6-3211, and basic nut on the eyebolt until about 1 X" of thread is
units 6-6211, 6-6212 and 6-6213. exposed above the nut.

WHEELHORSE
L..---------I lawn & garden tractors
PARTS DRAWING

FACTORY ORDER NUMBER 8·4311


MODEL 8·4311

When ordering parts always list Part No. and Description.


Pc )ugh Authorized Deal.
, change without notic

ITEM
DESCRIPTION
NO.

101, t Rod Assembly

2 1000:);' t:yebolt

3 4629 Spring

4 915663 Nut - Elastic Stop %-16

ORSE PRODUC Ireland Rd., S d. 46614


PRINTI p/L 556 PART NO. I

You might also like