Citrix Iprange
Citrix Iprange
2. If your firewall includes a content or application data scanning filter, this may cause blocking or latency, which would be indicated in the log
files for the filter. To address this problem, verify the below IP ranges will not be scanned or filtered by content or application data scanning
filters by specifying exception IP ranges that will not be filtered.
3. If your security policy requires you to specify explicit IP ranges, then configure your firewall to limit port 8200 or 80 or 443 destination IP
addresses to only the Citrix Online ranges listed below.
Important Note: Steps 2 and 3 are discouraged unless absolutely necessary because such IP ranges need to be periodically audited
and modified, creating additional maintenance to your network. These changes are rare, but they may be necessary to continue to provide
the maximum performance for the Citrix Online family of applications. Maintenance and failover events may cause you to connect to servers
within any of the ranges.
*Citrix Online has datacenters in San Jose, Las Vegas, New York, Atlanta, Washington D.C., Hong Kong, Sydney and Amsterdam
©
2009 Citrix Online, LLC. All rights reserved.
19865/4.24.09/PDF