Curriculum & Syllabi (Information Technology)

________________________________________________________________________
PONDICHERRY UNIVERSITY
BACHELOR OF TECHNOLOGY PROGRAMMES
(EIGHT SEMESTERS)

REGULATIONS
th
Approved by 17 Board of Studies (Engineering) meeting
(Operated from the Academic Year 2003-2004)

1. Conditions for Admission :

(A ) Candidates for admission to the first semester of the 8 semester

B.Tech Degree programme should be required to have passed.

The Higher Secondary Examination of the (10+2) curriculum

(Academic Stream) prescribed by the Government of Tamil Nadu / or any
other examination equivalent there to with minimum of 40% marks ( a
mere pass for SC/ST candidates) in aggregate of subjects – Mathematics,
Physics and Chemistry.
OR

An Examination of any University or Authority recognised by the

Executive Council of the Pondicherry University as equivalent thereto.

(A) Lateral Entry for Diploma passed candidates for admission to third
semester of the eight semester B.Tech programme should be
required to have passed three year diploma or four year sandwich
diploma course in engineering/technology with a minimum of 60%
marks in aggregate in the subjects covered in 3rd to 6th semester ( a
mere pass for SC/ST candidates). A list of diploma programmes
approved for admission for each of the degree programme is given
in Annexure – A.

2. Age Limit :

The candidate should not have completed 21 years of age as on 1st

July of the academic year under consideration. For Lateral Entry
admission to second year of degree programme candidates, should not
have completed 24 years as on 1st July of the academic year under
consideration. In the case of SC/ST candidates, the age limit is relaxable
by 3 years for both the cases.

http://it.pec.edu 1/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

3. Duration of Programme :

The Bachelor of Technology degree programme shall extend over a

period of 8 consecutive semesters spread over 4 academic years – two
semesters constituting one academic year. The duration of each
semester shall normally be 15 weeks excluding examinations.

4. Eligibility for the award of Degree :

No candidate shall be eligible for the award of the degree of Bachelor of

Technology, unless he/she has undergone the course for a period of 8
semesters (4 academic years) / 6 semesters (3 academic years for Lateral
Entry candidates) in the faculty of Engineering and has passed the
prescribed examinations in all the semesters.

5. Branches of Study :

Brach I - Civil Engineering

Branch II - Mechanical Engineering
Branch III - Electronics & Communication Engineering
Branch IV - Computer Science & Engineering
Branch V - Electrical & Electronics Engineering
Branch VI - Chemical Engineering
Branch VII - Electronics & Instrumentation Engineering
Branch VIII - Information Technology
Branch IX - Instrumentation & Control Engineering
Branch X - Mechatronics

or any other branches of study as and when offered. The branch allocation shall be
ordinarily done at the time of admission of the candidate to the first semester.

6. Subjects of Study :

The subjects of study shall include theory and practicals as given in the
scheme of examination and shall be in accordance with the prescribed
syllabus. The subjects of study for the first two semesters shall be
common for all branches of study.

7. Examinations :

The theory and practical examinations shall comprise continuous

assessment throughout the semesters in all subjects as well as university
examinations conducted by Pondicherry University at the end of the
semester (November / December or April / May).

http://it.pec.edu 2/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
(a) Courses for which there is a written paper of 75 marks in the
university examination.

The Internal Assessment marks of 25 has to be distributed as 10 marks

each for two class tests and 5 marks for class attendance in the particular
subject. The distribution of marks for attendance is as follows.

5 marks for 95% and above

4 marks for 90% and above but below 95%
3 marks for 85% and above but below 90%
2 marks for 80% and above but below 85%
1 mark for 75% and above but below 80%

In total three tests are to be conducted and the better two are to be
considered for assessment.

(b) Practicals for which there is a university practical examination

of 50 marks:

The internal assessment marks of 50 has to be distributed as 20 marks for

the periodic practical works and records submitted thereof, 15 marks for
an internal practical examination, 5 marks for an internal viva voce, and 10
marks for class attendance in the particular subject. The distribution of
marks is as given below.

10 marks for 95% and above

8 marks for 90% and above but below 95%
6 marks for 85% and above but below 90%
4 marks for 80% and above but below 85%
2 marks for 75% and above but below 80%

8. Requirement for appearing for University Examination :

A candidate shall be permitted to appear for university examinations at the

end of any semester only if:

(i) He / She secures not less than 75% overall attendance arrived at by
taking into account the total number of periods in all subjects put together
offered by the institution for the semester under consideration.

( Candidates who secure overall attendance greater than

60% and less than 75% have to pay a condonation fee as
prescribed by University along with a medical certificate
obtained from a medical officer not below the rank of Asst.
Director )

http://it.pec.edu 3/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
(i) He / She earns a progress certificate from the Head of the
institution for having satisfactorily completed the course of study in all the
subjects pertaining to that semester.

(i) His / Her conduct is found to be satisfactory as certified by the Head

of the institution. A candidate who has satisfied the requirement (i) to (iii)
shall be deemed to have satisfied the course requirements for the
semester.

(ii) In addition, the candidate shall satisfy the following conditions.

(a) To be permitted to register for courses in 5th semester, the

candidate should have earned a minimum of 30 credits for the I & II
semesters put together.

(b) To be permitted to register for the courses in 7th semester, the

candidate should have completed all credit requirements for the I
and II semester and 30 credits for the 3rd and 4th semesters put
together.

2. Procedure for completing the course :

A candidate can join the course of study of any semester only at the time
of its normal commencement and only if he/she has satisfied the course
requirements for the previous semester and further has registered for the
university examinations of the previous semester in all the subjects as well
as all arrear subjects if any.

However, the entire course should be completed within 14 consecutive

semesters.

3. Passing Minimum and Classification of Successful Candidates :

(i) A candidate shall be declared to have passed the examination in a

subject of study only if he/she secures not less than 50% of the total
marks (Internal Assessment plus University examination marks) and not
less than 40% of the marks in University examination.

(ii) A candidate who has been declared “Failed” in a particular subject

may reappear for that subject during the subsequent semesters and
secure a pass. However, there is a provision for revaluation of failed or
passed subjects provided he/she fulfills the following norms for
revaluation.

http://it.pec.edu 4/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
(a) Applications for revaluation should be filed within 4 weeks from the
date of declaration of results or 15 days from the date of receipt of
marks card whichever is earlier.

(b) The candidate should have attended all the college examinations as
well as university examination.

(c) If a candidate has failed in more than two papers in the current
university examination, his/her representation for revaluation will not
be considered.

(d) The request for revaluation must be made in the format prescribed
duly recommended by the Head of the Institution along with the
revaluation fee prescribed by the University.

The internal assessment marks obtained by the candidate shall be

considered only in the first attempt for theory subjects alone. For the
subsequent attempts, University examination marks will be made upto the
total marks. Further the University examination marks obtained in the
latest attempt shall alone remain valid in total suppression of the
University examination marks obtained by the candidate in earlier
attempts.

(i) AWARD OF LETTER GRADES

The assessments of a course will be done on absolute marks basis, however, for the purpose of
reporting the performance of a candidate, letter grades, each carrying certain points, will be
awarded as per the range of total marks (out of 100) obtained by the candidate, as detailed
below:

Range of Total Marks Letter Grade Grade Points

90 to 100 S 10
80 to 89 A 9
70 to 79 B 8
60 to 69 C 7
55 to 59 D 6
50 to 54 E 5
0 to 49 F 0
Incomplete FA

F Denotes failure in the course.

http://it.pec.edu 5/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
FA denotes absent / detained as per clause 8. After results are declared, Grade Sheets
will be issued to the students. The grade sheets will contain the following details:

(a) The college in which the candidate has studied.

(b) The list of courses enrolled during the semester and the grades
scored.

(c) The Grade Point Average (GPA) for the semester and The
Cumulative Grade Point Average (CGPA) of all enrolled subjects
from first semester onwards.

(d) GPA is the ratio of sum of the products of the number of credits of
courses registered and the corresponding grades points scored in those
courses, taken for all the courses and sum of the number of credits o all
the courses

Sum of [c x GP]
GPA --------------------
Sum of C

CGPA will be calculated in a similar manner, considering all the courses enrolled from
first semester, ‘F’ FA grades are to be excluded for calculating GPA and CGPA.

(iv) A candidate who satisfies the course requirements for all semesters
and who passes all the examinations prescribed for all the eight
semesters within a MAXIMUM PERIOD OF 7 YEARS reckoned from the
commencement of the first semester to which the candidate was admitted
shall be declared to have qualified for the award of degree.

(v) A candidate who qualifies for the award of the degree passing in all
subjects pertaining to semesters 3 to 8 in his/her first appearance within 6
consecutive semesters ( 3 academic years ) and in addition secures a
CGPA of 8.50 and above for the semesters 3 to 8 shall be declared to
have passed the examination in FIRST CLASS with DISTINCTION.

(vi) For the Award of University ranks and Gold Medal for each branch of
study, the CGPA secured from 3rd to 8th semester alone should be
considered. Rank certificates would be issued to the first ten candidates
in each branch of study

(vii) A candidate who qualifies for the award of the degree by passing in
all subjects relating to semesters 3 to 8 within a maximum period of 8
semesters after his/her commencement of study in the third semester and

http://it.pec.edu 6/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
in addition secures CGPA not less than 6.5 shall declared to have passed
the examination in FIRST CLASS.

(viii) All other candidates who qualify for the award of degree shall be
declared to have passed the examination in SECOND CLASS.

4. Provision for withdrawal :

A candidate may, for valid reasons, and on the recommendations of the

Head of the Institution be granted permission by the University to withdraw
from writing the entire semester examination as one Unit. The withdrawal
application shall be valid only if it is made earlier than the commencement
of the last theory examination pertaining to that semester. Withdrawal
shall be permitted only once during the entire course. Other conditions
being satisfactory, candidates who withdraw are also eligible to be
awarded. DISTINCTION whereas they are not eligible to be awarded a
rank.

5. Discontinuation of Course :

If a candidate wishes to temporarily discontinue the course for valid

reasons, he/she shall apply through the Head of the Institution in advance
and obtain a written order from the University permitting discontinuance.
A candidate after temporary discontinuance may rejoin the course only at
the commencement of the semester at which he/she discontinued,
provided he/she pays the prescribed fees to the University. The total
period of completion of the course reckoned from the commencement of
the first semester to which the candidate was admitted shall not in any
case exceed 7 years, including of the period of discontinuance.

6. Revision of Regulations and Curriculum :

The University may from time to time revise, amend or change the
regulations of curriculum and syllabus as and when found necessary.

http://it.pec.edu 7/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
ANNEXURE – A
B.Tech courses in which Diploma courses eligible
admission is sought for admission
Civil Engineering Civil Engineering
Civil and Rural Engineering
Architectural Assistantship
Architecture
Civil Engineering (Sandwich)
Mechanical Engineering Mechanical Engineering
Automobile Engineering
Agricultural Engineering
Mechanical and Rural Engineering
Refrigeration and Air-conditioning
Agricultural Engineering & Farm –
Equipment – Technology
Metallurgy
Production Engineering
Machine Design & Drafting
Mechanical Engineering (Sandwich)
Machine tool maintenance and
Repairs (Sandwich)
Printing Technology / Engineering
Textile Engineering / Technology
Tool Engineering
Electrical and Electronics Electrical Engineering
Engineering Electrical and Electronics Engineering
Electronics and Instrumentation
Instrumentation Technology
Electronics & Communication Electronics and Communication Engg.,
Engineering Electronics Engineering
Electrical Engineering
Electrical and Electronics Engineering
Medical Electronics
Computer Science & Computer Science & Engineering
Engineering Computer Technology
Electronic and Instrumentation and Control
Instrumentation Instrumentation Engineering
Engineering, Instrumentation and Control Engineering Electronics and Instrumentation
Electronics Engineering
Applied Electronics
Medical Elecctronics
Electrical & Electronics
Electronics and Communication Engineering
Chemical Engineering Chemical Engineering
Chemical Technology
Petrochemical Technology
Petroleum Engineering
Ceramic Technology
Plastic Engineering
Paper & Pulp Technology (Sandwich)
Polymer Technology (Sandwich)
Information Technology Computer Science and Engineering
Computer Technology
Electrical and Electronics Engineering
Electronics & Communication Engineering
Electronics and Instrumentation Engineering
Instrumentation Engineering

http://it.pec.edu 8/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

PONDICHERRY UNIVERSITY
B.Tech - CURRICULUM

I B.TECH - INFORMATION TECHNOLOGY

I Semester

Code No. Name of the Subjects Periods Credit Marks

L T P s IA UE TM
Theory
UCC0041 Computer Programming 3 - - 3 25 75 100
UCC1202 Mathematics – I 3 1 - 4 25 75 100
UCC1213 Physics 3 - - 3 25 75 100
UCC1224 Chemistry 3 - - 3 25 75 100
UCC0135 Elements of Electrical 3 1 - 4 25 75 100
Electronics Engineering
UCC0026 Thermodynamics 2 1 - 3 25 75 100
Practicals
UCC0047 Computer Lab - - 3 1 50 50 100
UCC0028 Engineering Graphics 2 - 3 2 50 50 100
UCC0059 Basic Electrical & - - 3 1 50 50 100
Electronics Lab
Total 19 3 9 24 300 600 900

II Semester

Code No. Name of the Subjects Periods Credit Marks

L T P s IA UE TM
Theory
UCC 0231 Technical English 3 - - 3 25 75 100
UCC 2202 Mathematics – II 3 1 - 4 25 75 100
UCC 2213 Material Science 3 - - 3 25 75 100
UCC 2224 Environmental Science 3 - - 3 25 75 100
UCC 0125 Basic Engineering 4 - - 4 25 75 100
UCC 0016 Engineering Mechanics 2 1 - 3 25 75 100
Practicals
UCC 0217 Physics lab - - 3 1 50 50 100
UCC 0228 Chemistry lab - - 3 1 50 50 100
UCC 0029 Workshop Practice - - 3 1 50 50 100
Total 18 2 9 23 300 600 900

http://it.pec.edu 9/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

PONDICHERRY UNIVERSITY

CURRICULUM AND SYLLABI FOR

B.TECH. (INFORMATION TECHNOLOGY)

III SEMESTER

CODE SUBJECT L T P Cr IA UE TM
UCC 3201 MATHEMATICS –III 3 1 0 4 25 75 100
UIT 3032 ELECTRONIC DEVICES AND CIRCUITS ♣ 3 0 0 3 25 75 100
UIT 3083 INTRODUCTION TO INFORMATION
3 0 0 3 25 75 100
TECHNOLOGY
UIT 3084 DIGITAL COMPUTER FUNDAMENTALS
3 0 0 3 25 75 100
AND ARCHITECTURE ♣
UIT 3085 DATA STRUCTURES♣ 3 0 0 3 25 75 100
UIT 3086 BUSINESS PROCESS 3 0 0 3 25 75 100
UIT 3037 ELECTRONIC CIRCUITS LAB 0 0 3 2 50 50 100
UIT 3088 DIGITAL LAB ♣ 0 0 3 2 50 50 100
UIT 3089 DATA STRUCTURES LAB ♣ 0 0 3 2 50 50 100
UCC 30810 GENERAL PROFICIENCY - I 0 0 3 1 50 - 50
TOTAL 18 1 12 26 - - 950

IV SEMESTER

CODE SUBJECT L T P Cr IA UE TM
UIT 4201 DISCRETE MATHEMATICS AND GRAPH
3 1 0 4 25 75 100
THEORY♣
UIT 4032 PRINCIPLES OF COMMUNICATION 3 0 0 3 25 75 100
UIT 4083 MICROPROCESSORS AND APLLICATIONS
3 0 0 3 25 75 100
♣
UIT 4084 DESIGN AND ANALYSIS OF ALGORITHMS ♣ 3 1 0 4 25 75 100
UIT 4085 OPERATING SYSTEMS ♣ 3 0 0 3 25 75 100
UIT 4086 FORMAL LANGUAGES AND COMPILERS 3 0 0 3 25 75 100
UIT 4037 COMMUNICATION LAB 0 0 3 2 50 50 100
UIT 4088 MICROPROCESSOR LAB♣ 0 0 3 2 50 50 100
UIT 4089 OPERATING SYSTEMS LAB♣ 0 0 3 2 50 50 100
UCC 40810 GENERAL PROFICIENCY - II 0 0 3 1 50 - 50
TOTAL 18 2 12 27 - - 950

V SEMESTER

CODE SUBJECT L T P Cr IA UE TM
UIT 5201 MATHEMATICAL STATISTICS AND
3 0 0 3 25 75 100
NUMERICAL METHODS
UIT 5032 COMMUNICATION ENGINEERING 3 0 0 3 25 75 100
UIT 5083 VISUAL PROGRAMMING ♣ 3 0 0 3 25 75 100
UIT 5084 OBJECT ORIENTED PROGRAMMING 3 0 0 3 25 75 100
IDE 5005 IDE - I 3 0 0 3 25 75 100
UIT 5036 COMMUNICATION ENGINEERING LAB 0 0 3 2 50 50 100
UIT 5087 VISUAL PROGRAMMING LAB♣ 0 0 3 2 50 50 100
UIT 5088 OBJECT ORIENTED PROGRAMMING LAB 0 0 3 2 50 50 100

http://it.pec.edu 10/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC 5089 GENERAL PROFICIENCY-III 0 0 3 1 50 - 50
TOTAL 15 0 12 22 - - 850

VI SEMESTER

CODE SUBJECT L T P Cr IA UE TM
UIT 6081 COMPUTER HARDWARE AND TROUBLE
3 0 0 3 25 75 100
SHOOTING ♣
UIT 6082 DATABASE MANAGEMENT SYSTEMS ♣ 3 0 0 3 25 75 100
UIT 6083 SOFTWARE ENGINEERING AND
3 0 0 3 25 75 100
ARCHITECTURE ♣
UIT 6084 COMPUTER NETWORKS ♣ 3 0 0 3 25 75 100
IDE 6005 IDE - II 3 0 0 3 25 75 100
UIT 6086 HARDWARE TROUBLE SHOOTING LAB♣ 0 0 3 2 50 50 100
UIT 6087 DATABASE MANAGEMENT SYSTEMS LAB♣ 0 0 3 2 50 50 100
UIT 6088 COMPUTER NETWORKS LAB ♣ 0 0 3 2 50 50 100
UIT 6089 INDUSTRIAL TRAINING/VISIT (Report) 0 0 3 1 50 - 50
UCC 60810 GENERAL PROFICIENCY-IV 0 0 3 1 50 - 50
TOTAL 15 0 15 23 - - 900

VII SEMESTER

CODE SUBJECT L T P Cr IA UE TM
UIT 7081 INTERNET TECHNOLOGY AND WEB
3 0 0 3 25 75 100
DESIGN ♣
UIT 7082 HIGH SPEED NETWORKS ♣ 3 0 0 3 25 75 100
UIT 7083 DISTRIBUTED COMPUTING ♣ 3 0 0 3 25 75 100
UIT 7084 ELECTIVE – I 3 0 0 3 25 75 100
UIT 7085 ELECTIVE – II 3 0 0 3 25 75 100
UIT 7086 INTERNET TECHNOLOGY LAB♣ 0 0 3 2 50 50 100
UIT 7087 DISTRIBUTED COMPUTING LAB♣ 0 0 3 2 50 50 100
UIT 7088 PROJECT WORK (PHASE -I) 0 0 3 2 50 - 50
UIT 7089 SEMINAR 0 0 3 1 50 - 50
TOTAL 15 0 12 22 - - 800

VIII SEMESTER

CODE SUBJECT L T P Cr IA UE TM
UIT 8081 INTELLIGENT COMPUTING 3 0 0 3 25 75 100
UIT 8082 EMBEDDED SYSTEMS ♣ 3 0 0 3 25 75 100
UIT 8083 INFORMATION CODING TECHNIQUES 3 0 0 3 25 75 100
UIT 8084 ELECTIVE – III 3 0 0 3 25 75 100
UIT 8085 ELECTIVE – IV 3 0 0 3 25 75 100
UIT 8086 ADVANCED SOFTWARE LAB 0 0 3 2 50 50 100
UIT 8087 PROJECT WORK (PHASE - II) 0 0 9 4 50 100 150
UIT 8088 COMPREHENSIVE VIVA VOCE 0 0 3 2 50 50 100
TOTAL 15 0 15 23 - - 850

♣ - Common to B.Tech (CSE) and B.Tech (IT)

http://it.pec.edu 11/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

LIST OF ELECTIVES
VII SEMESTER
UIT 708E1 INDUSTRIAL PSYCHOLOGY AND SAFETY MEASURES ♣
UIT 708E2 BUSINESS ENVIRONMENT AND HUMAN RESOURCE MANAGEMENT ♣
UIT 708E3 MANAGEMENT CONCEPTS AND STRATEGIES
UIT 708E4 ORGANIZATIONAL BEHAVIOUR AND INDUSTRIAL RELATIONS
UIT 708E5 OPTIMIZATION TECHNIQUES
UIT 708E6 CLIENT SERVER ARCHITECHTURE
UIT 708E7 TELECOMMUNICATION MANAGEMENT
UIT 708E8 FAULT TOLERANT SYSTEMS
UIT 708E9 MOBILE COMMUNICATION NETWORKS♣
UIT 708E10 NETWORK STANDARDS AND PROTOCOLS
UIT 708E11 VLSI DESIGN ♣

VIII SEMESTER
UIT 808E1 ADVANCED DATABASES ♣
UIT 808E2 SATELLITE COMMUNICATION SYSTEMS
UIT 808E3 OPTICAL COMMUNICATION NETWORKS♣
UIT 808E4 KNOWLEDGE BASE SYSTEMS
UIT 808E5 NETWORK ADMINISTRATION AND MANAGEMENT ♣
UIT 808E6 GIS AND REMOTE SENSING
UIT 808E7 E - BUSINESS♣
UIT 808E8 DIGITAL SIGNAL PROCESSING
UIT 808E9 WEB ADVERTISING AND MARKETING
UIT 808E10 • NET FRAMEWORK AND APPLICATIONS ♣
UIT 808E11 SOFTWARE QUALITY MANAGEMENT

LIST OF INTERDEPARTMENTAL ELECTIVES (IDEs)

UIDE 011 EXPERIMENTAL STRESS ANALYSIS
UIDE 012 COMPUTER AIDED PLANNING AND DRAFTING
UIDE 021 MECHATRONICS
UIDE 022 TOTAL QUALITY MANAGEMENT
UIDE 031 COMMUNICATION ENGINEERING
UIDE 032 COMPUTER NETWORKS #
UIDE 041 RELATIONAL DATABASE MANAGEMENT SYSTEMS #
UIDE 042 VISUAL PROGRAMMING #
UIDE 051 INTRODUCTION TO SOFT COMPUTING
UIDE 052 INDUSTRIAL ELECTRONICS
UIDE 061 ELEMENTS OF BIOTECHNOLOGY
UIDE 062 INDUSTRIAL POLLUTION ABATEMENT
UIDE 071 INDUSTRIAL CONTROL SYSTEMS
UIDE 072 TRANSDUCERS AND INSTRUMENTATION
UIDE 081 IT FOR ENGINEERS #
UIDE 082 BIO INFORMATICS
UIDE 201 FINITE ELEMENT METHODS
UIDE 202 COMPUTATIONAL FLUID DYNAMICS
UIDE 211 INTRODUCTION TO NANO TECHNOLOGY
UIDE 212 NOVEL AND INTELLIGENT MATERIALS
UIDE 221 INSTRUMENTAL METHODS OF ANALYSIS
UIDE 222 CERAMIC TECHNOLOGY

♣ Common to B.Tech (CSE) and B.Tech (IT) # Will not be offered for B.Tech (CSE) and B.Tech (IT)

Note :
1. (Each department is assigned a unique code for reference : CE - 01, ME - 02, ECE - 03, CSE - 04, EEE - 05,
ChE - 06, EIE - 07, IT - 08, ICE - 09, Maths - 20, Physics - 21, Chemistry - 22, Social Science - 23, Management - 24)
2. Subject Code : (udergraduate)(branch) (semester)(dept code that handles subject)(paper-no.)

http://it.pec.edu 12/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 0041 COMPUTER PROGRAMMING

UNIT – I

Introduction to basic concepts of Hardware/Software – System Software – Application

Software – Low level and High level Languages – CAD/CAM – Graphics – AutoCAD –
LAN-MAN-WAN – Internet and Intranet.

UNIT – II

Fundamentals of C Programming:– Sample ‘C’ Program. Introduction to Data types: –

Identifier, keyword, data type, ASCII, variables, constants. Input/output:– Printf, Scanf,
format string - escape sequences. Operators and constructs: – Relational, logical,
conditional operators, expression, statements, if, else if, shorthand operators.

UNIT III

Loops - Functions –Recursion – String handling – Programming examples -Type

conversion.

UNIT IV

Storage class specifiers – User defined data types – Enumerated data types, typedef –
Structures – Union.

UNIT V

C Preprocessor – Pointers – File handling - problems using these concepts

Text Books:

1. Subburaj. R, Programming in C, Vikas Publishing House Pvt Ltd., First

Edition, 2000.
2. Balagurusamy. E, Programming in ANSI C, Tata McGraw Hill, Second
Edition, 2002.

http://it.pec.edu 13/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 1202 MATHEMATICS - I

UNIT-I

APPLICATION OF DIFFERENTIATION: Sub tangent and subnormal – Curvature,

evolutes and involutes.

INTEGRAL CALCULUS: Properties of definite integrals – Reduction formulae for xn

eax, sinn(x), cosn(x), tann(x), sinm(x) cosn(x), xn sin(ax), and xn cos(ax).

UNIT –II
MULTIPLE INTEGRALS AND APPLICATIONS: Multiple integrals – change of order of
integration. Applications: Areas and volumes (Cartesian and polar) – mass and
center of mass (constant and variable densities).

UNIT-III
ANALYTICAL SOLID GEOMETRY: Directional cosines and ratios – angle between
two lines – the equation of plane - equations to a straight line and shortest distance
between two skew lines.

UNIT-IV
DIFFERENTIAL EQUATIONS: Exact equations, First order linear equations, Bernoulli’s
equation, orthogonal trajectories, growth and decay, geometrical applications and
electric circuits. Equations not of first degree: equations solvable for p, equations
solvable for y, equations solvable for x and Clairaut’s type.

UNIT-V
DIFFERENTIAL EQUATIONS(Higher order): Linear differential equations of higher
order – with constant coefficients, the operator D - Euler’s linear equation of higher
order with variable coefficients - simultaneous linear differential equations – solution
by variation of parameters method – simple applications to electric circuits.

Text Book:

Dr.M.K.Venkataraman, Engineering Mathematics (First Year), Second Edition, The

National Publishing Company, Madras, July 2001.

Reference Book:

A. Kandasamy, K. Thilagavathy and K. Gunavathy, Engineering Mathematics,

Volume-I, Second Edition, S. Chand and Company Ltd., New Delhi 1996.

http://it.pec.edu 14/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC 1213 PHYSICS – I

Unit I – Optics

Interference: Newton’s rings – Michelson’s interferometer – wavelength

determination – interference filter – antireflection coatings. Diffraction: diffraction grating
– resolving power of grating & prism. Polarization: Fresnel’s theory of double refraction –
quarter and half wave plates – Optical Rotation.

Unit II – Acoustics

Ultrasonics: ultrasonic waves productions and detections – piezoelectric –

magnetostriction – NDT applications. Acoustics of auditoria: – Sabine’s formula –
Reverberation time.

Unit III – Wave mechanics

Matter waves – de Broglie wavelength – uncertainty principle – Schroedinger

wave equation – time dependent – time independent – application to particle in a box –
barrier penetration – tunneling effect – tunnel diode.

Unit IV – Nuclear energy source

Binding energy – mass defect – packing fraction – mass and binding energy –
disintegration in fission – fission and fusion – nuclear reactor – PHWR – FBTR –
materials used in nuclear reactors.

Unit V – Lasers

Principles of Laser – Einstein’s Coefficients – Threshold Conditions – Optical

resonators – Solid State laser: NdYAG – Gas Laser: CO2 laser – Dye laser,
Semiconductor Laser: GaAs Laser – Laser in NTD: Holographic Interferrometry, Single
and Double exposure

Text Books:

1. Engineering Physics R K Gaur and S L Gupta, Dhantath Rai and Sons (1996)
2. Optics – 2nd Edition Ajay Ghatak TMH (1995)

Reference Books:

1. Introduction to Modern Physics – Richtwmeyer, Kennard and cooper TMH (1998).

2. Laser and Application – Thiagarajan and Ghatak
3. Corept of Modern Physics Beiser – Mc graw Hill (1998).

http://it.pec.edu 15/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC 1224 CHEMISTRY
UNIT I WATER
Hardness of water – units and calcium carbonate equivalent.
Determination of hardness of water – O – Hehner’s method.
Disadvantages of hardwater – boiler scale and sludge, caustic
embrittlement, priming & foaming and boiler corrosion.
Water softening method – lime-soda process, zeolite process
and Ion exchange process

UNITII HIGH POLYMERS

Monomers – functionality, degree of polymerization -Tacticity -
Addition & Condensation Polymerization – Molecular weight distribution.
Polymerization techniques - Thermoplastics and Thermosets -
Preparation, properties and uses of Polyester,Teflon, nylon 6,6, PVC,
Bakelite.
Polymer composites - Fibre reinforced plastics.

UNIT-III ELECTROCHEMICAL CELLS

Galvanic cells, Single electrode potential, Standard electrode
potential.Elctromotive series. EMF of a cell and its measurement.
Nernst equation. Electrolyte Concentration cell. Reference
electrodes - Hydrogen, Calomel & Glass electrodes.
Batteries - Primary and secondary cells, laclanche cell, lead acid
storage cell & Ni-Cd battery.
10 hrs

UNIT-IV CORROSION AND ITS CONTROL

Chemical and Electrochemical corrosion. Types of corrosion-Galvanic, pitting,
concentration cell corrosion. Passivity. Corrosion control
Methods - Cathodic protection and corrosion inhibitors.
Protective coatings: Types of protective coatings-Metallic coating, -
cladding, electroplating and anodizing.

UNIT-V PHASE RULE

Phase rule-definition and explanation of terms in phase rule.
Water, lead -silver alloy system, copper – nickel alloy system
and iron-carbon alloy system

TEXT BOOKS
1. P C Jain and Monika Jain, “Engineering Chemistry” Dhanpat Rai and Sons, New Delhi,
2000
1. S S Data, “A Textbook of Engineering Chemistry” S Chand & Co., Ltd.,
New Delhi.
REFERENCES :
J C Kuriacose and Raja Ram J, “Chemistry in Engineering and Technology Vol.-I & II,
Tata McGraw-Hill Co-Ltd., New Delhi.

http://it.pec.edu 16/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC 0135 – ELEMENTS OF ELECTRICAL AND
ELECTRONICS ENGINEERING

ELECTRICAL:
PART – A

UNIT – I
Active and passive elements - review of Kirchoff’s laws – star/delta conversion –
equivalent resistance – Node and mesh methods of analysis of DC circuits.
UNIT – II
Concepts of AC circuits – rms value, average value, form and peak factors – real
and reactive power – power factor – Node and mesh analysis of AC circuits.
UNIT – III
Introduction to three phase balanced circuits – two watt meter method of power
measurement – Principle of DC generator, DC motor, Transformer and single phase
motor.

ELECTRONICS:
PART - B

UNIT – I
Solid state devices - characteristic of diode, BJT, FET,UJT and SCR – RC
coupled amplifier- Principle of Hartley oscillator and RC phase – shift oscillator –
Introduction to IC.

Transducers – Linear variable differential transformer (LVDT, Strain gauge,

Tachogenerator, Resistance Temperature Detector (RTD), Thermocouple, Thermistor,
Piezoelectric transducer.
UNIT – II
Boolean algebra – reduction of Boolean expressions – De-Morgan’s theorem
logic gates – Implementation of Boolean expressions – flip - flops RS, JK, T and D –
combinational logic - Half adder, Full adder and subtractors – Principle of counters and
registers
UNIT – III
Model of a communication system – Types of electrical communication channel-
wire and wireless channel – wire, Coaxial cable and optical fiber – Microwave radio link
and satellite link. Advantage of Digital Communication – Overview of ISDN.

TEXT BOOKS:
1. R. Muthusubramanian, S Salivahanan, and K A Muraleedharan, “Basic Electrical,
Electronics and Computer Engineering”, Tata McGraw Hill, New Delhi, 2000.

Reference Books:

1. D.P. Kothari and I.J. Nagrath, “Theory and Problems of Basic Electrical
Engineering” Prentice Hall of India Ltd. New Delhi.
2. Allen Mottershead , “Electronic Devices and Circuits: An Introduction”, Prentice
Hall of India Ltd. New Delhi.
3. George Kennedy and Bernard Davis, “Electronic Communication Systems”, Tata
McGraw-Hill Ltd. New Delhi. Year 2001.

http://it.pec.edu 17/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC 0026 THERMODYNAMICS

UNIT I : BASIC CONCEPTS AND DEFINITIONS

Energy conversion and efficiencies - System, property and state - Thermal equilibrium -
Temperature - Zeroth law of Thermodynamics.

UNIT II : FIRST LAW OF THERMODYNAMICS

The concept of work and adiabatic process - First law of thermodynamics - Conservation
of Energy principle for closed and open systems - Calculation of work for different
processes of expansion of gases

UNIT III : SECOND LAW OF THERMODYNAMICS

Equilibrium and the second law - Heat engines - Kelvin-Planck statement of second law
of thermodynamics - Reversible and irreversible processes - Carnot principle - Clausius
inequality- Entropy

UNIT IV : GAS POWER CYCLES

Air standard cycles: The air standard Carnot cycle - Air standard Otto cycle, diesel cycle,
dual cycle and Bryton cycles and their efficiencies

UNIT V : REFRIGERATION CYCLES AND SYSTEMS

Reverse Carnot cycle - COP - Vapor compression refrigeration cycle and systems - Gas
refrigeration cycle - Absorption refrigeration system - Liquifaction and solidification of
gases

Text Books :

1. Nag,P.K., “Engineering Thermodynamics”, 2nd edition, Tata Mc Graw Hill

Publishing Co. Ltd., New Delhi,1995
2. Wark, K., “Thermodynamics”, 4th edition ,Mc Graw Hill, N.Y.,1985

Reference Books :

1. Arora, C.P., “Thermodynamics” , Tata Mc Graw Hill Publishing Co. Ltd., New
Delhi,1998.
2. Burghardt, M.D., “Engineering Thermodynamics with Applications”, 4th edition,
Harper & Row, N.Y., 1986.
3. Huang, F.F., “Engineering Thermodynamics” 2nd edition , Macmillan Publishing
Co. Ltd., N.Y.,1989.
4. Van Wylen, G.J and R.E Sonntag., “Fundamental of Classical
Thermodynamics”, 4th edition, John Wiley & Sons , 1994.
5. Cengel, Y.A. and Boles, M.A., 1989, "Thermodynamics - An Engineering
Approach", Mc-Graw Hill.

http://it.pec.edu 18/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 0047 COMPUTER PROGRAMMING LAB (0 0 3 2)

There are three cycles of experiments. Write C programs to solve the problems
wherever required.

CYCLE I - BASIC CONCEPTS

1. Study of Turbo C IDE – Compilation and execution using simple C Programs

– Simple OS Interface/ commands.

2. Solve quadratic equation for various possible inputs.

3. Generation of all prime numbers in a given range. (Using iteration construct).

4. Sort given array of numbers and names.

5. Matrix operations (addition, subtraction, transpose)

CYCLE II - STRUCTURES AND FILES

6. Create an array of structures for student information with the following details:

Name -
DOB -
Age
Marks - percentage or CGPA
Roll No. -
Gender -

i. Compute the overall pass percentage of the class.

ii. List of the students roll numbers who failed in the current semester.
iii. Compute the average
1v.Given a name, print the marks and other details.

7. Using files implement the above problem and print the mark sheet of each
student after storing structure information in an input file. Also read the input file
and create two output files containing male student information and female
student information separately.

8. Develop the following functions to perform matrix multiplication:

i. Read any given general matrix
ii. Print a given matrix
iii. Identify the compatibility
iv. Multiplication of two matrices

9. Recursive program to
i. Find Factorial of a number
i. Generate Fibonacci Series.

http://it.pec.edu 19/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

CYCLE III - APPLICATIONS

10. Using AutoCAD,

a) Draw a National flag/house/car/layout of a street using basic objects.
a) Create a village layout and manipulate it with different edit commands.

11.Using MS WORD,
a) Prepare a practical experiment report for any one of Physics experiments.
(report should include diagrams, tables, formulae, using mathematical symbols.)

b) Prepare a letter containing the facilities available in a department addressed

to N companies (using mail merge).

12. The placement data from the year 1996 to 2001 of Pondicherry Engineering College
is given in the following table.
Year Number of
Students
placed
1996 168
1997 179
1998 272
1999 245
2000 292
2001 192
Using extrapolation method, find the expected number of students to be placed in
the year 2005.

13. To identify the position of a pendulum at a given time instant after formulating
equation for simple pendulum.

14. Accept a chemical equation and check whether it is balanced or not.

15. To Count the number of words and sentences in a given paragraph.

http://it.pec.edu 20/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 0231 – TECHNICAL ENGLISH

UNIT – I - BASIC COMMUNICATION THEORY

Communication as sharing; context of communication; the speaker/writer and the

listener/reader; medium of communication; barriers to communication; accuracy, brevity,
clarity and appropriateness in communication.

UNIT – II READING

Comprehension of technical and non-technical material, skimming, scanning, Inferring,

Guessing, the meaning of words from contexts, Note making and extension of
vocabulary, predicting and responding to context.

Include Intensive Reading.

UNIT – III WRITING

Effective sentences, Cohesive writing, Clarity and Conciseness in writing, Introduction to

technical writing, Better paragraphs, Definition, Description, Practice in summary writing.

Include I. Four modes of writing – Description, Narration, Exposition and

Argument.
II. Use of dictionaries, Library references, Use of indices. Making bibliographical
entries with regard to sources from books, journals, internet, etc. Developing
reference skills relating to note taking, collating information and organizing it.

UNIT IV WRITTEN COMMUNICATION

Report writing – informal and formal reports, Memoranda, Notice, Instruction.

Include: Business Letters, Resumes, Job Applications.

UNIT V - SPEAKING

Features of effective speech, practice in speaking fluently, Dialogue practice, Simple

social exchanges, short extempore.
Include : Basics in Phonetics, Group Discussions and Presentations.
Importance of Listening Skills.

Text Books :

0. Boove, Courtland R, et al. Business Communication

Today. Delhi: Pearson Education, 2002.
0. Lakshminarayanan, K.R. English for Technical
Communication, Chennai: Scitech Publication, 2001.
Reference Books:

1. Davis, Llyod and Susan McKay, Structures and Strategies. Hyderabad; Universities
Press, 1999.

http://it.pec.edu 21/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
2. Jones, Daniel, Everyman’s English Promunciation Dictionary, New Delhi; Universal
Book Stall, 2001.

UCC 0028 ENGINEERING GRAPHICS

Unit 0

Introduction to Standards for Engineering Drawing practice, Lettering, Line work and
Dimensioning

Unit I

Conic sections, Involutes, Spirals, Helix. Projection of Points, Lines and Planes

Unit II

Projection of Solids and Sections of Solids.

Unit III

Development of surfaces - Intersection of surfaces (cylinder-cylinder, cylinder-cone)

Unit IV

Isometric projections and Orthographic projections

Unit V

Computer Aided Drafting: Introduction to Computer Aided Drafting hardware - Overview

of application software - 2D drafting commands (Auto CAD) for simple shapes -
Dimensioning.

TEXT BOOKS:

1. K.R. Gopalakrishna, A Text Book of Engineering Drawing, Vol. I & II

2. K.V. Natarajan, A Text Book of Engineering Drawing.
3. BIS, Engineering Drawing practice for Schools & College.

REFERENCES:

1. N.D. Bhatt, Engineering Drawing.

2. K. Venugopal, Engineering Drawing.
3. Warren. T. Luzadder, Fundamentals of Engineering Drawing.
4. David I cook and Robert N Mc Dougal, Engineering Graphics and Design with
computer applications, Holt – Sounders Int. Edn. 1985.
5. James D Bethune and et al., Modern Drafting, Prentice Hall Int., 1989.

http://it.pec.edu 22/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 0059 - BASIC ELECTRICAL AND ELECTRONICS LAB

List of Experiments

Electrical:

1. Study of tools and accessories

2. Study of joints

3. Staircase wiring

4. Doctor’s room wiring

5. Godown wiring

6. Tube Light and Fan connection

7. Lamp controlled from three different places-wiring

Electronics:

1. Study of Analog and digital instruments

2. Study of CRO

1. Calibration of Voltmeter and Ammeter

2. Calibration of Energy meter and Wattmeter

3. Verification of Kirchoff’s laws

4. Characteristics study of transducers (LVDT, Straingauge, thermocouple)

5. Digital Logic Gates

http://it.pec.edu 23/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC 2202 MATHEMATICS - II

Unit I

ALGEBRA: Binomial, exponential and logarithmic series (without proof) – problems on

summation, approximation and coefficients.

Unit II

MATRICES: Inverse of matrix by row transformation – Eigen values and Eigen vectors -
Cayley-Hamilton theorem (without proof) – Diagonalisation – rank of matrix – solution of
a general system of m linear algebraic equations in n unknown (m ≤ n).

Unit III

TRIGONOMETRY: Expansions for sin(nθ), cos(nθ), tan(nθ), sinn(θ), cosn(θ).

Exponential, circular, hyperbolic, inverse hyperbolic and logarithmic functions of a
complex variable – separation of real and imaginary parts. (Sec.6.1 to 6.3, 6.5 in
Chapter6 and Chapter 7 in the Text Book given below)

Unit IV

VECTOR ANALYSIS: Scalar fields and Vector fields – Gradient, Divergence and Curl –
their properties and relations – Gauss and Stokes theorems (without proof), simple
problems for their verification.

Unit V

STATISTICS: Moments, kurtosis and skewness based on moments only. Probability

distributions: Binomial, Poisson and Normal - evaluation of statistical parameters for these
three distributions. Correlation and regression – rank correlation.

Text Book:

Dr.M.K.Venkataraman, Engineering Mathematics (First Year), Second Edition, The

National Publishing Company, Madras, July 2001.

Reference Book:

P. Kandasamy, K. Thilagavathy and K. Gunavathy, Engineering Mathematics,

Volume-I, Second Edition, S. Chand and Company Ltd., New Delhi, 1996.

http://it.pec.edu 24/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC 2213 Material Science

Unit I - Crystal structure and x – ray diffraction

Miller indices – Bravais lattices – unit cell – reciprocal lattice vector – Atomic
packing fraction – Debye–Scherrer X– ray Diffraction method – co-ordination number –
radius of atom and size of cell.

Unit II – Defects
Point defects – Qualitative ideas of point, line and volume defects - Lattice
vibration – Specific heat of solids – Einstein’s-Debye’s Theory – Thermal conductivity in
metals

Unit III – Dielectric properties

Dielectric Polarization and Mechanism – Clausius-Mossotti relation – Dielectric
constant measurements – Temperature and frequency dependence of dielectric constant –
Dielectric loss – Measurement of Dielectric constant and loss using Scherring bridge –
Elementary ideas of Piezoelectrics, ferroelectrics and pyroelectric materials and its
applications

Unit IV – Magnetic Properties

Classification of Magnetic Materials – Quantum Theory of Ferro and Anti-
ferromagnetism – hysteresis curves and parameters – Curie temperature – domain
theory – magnetic anisotropy – soft and hard magnetic materials – magnetic bubble –
memory devices - Magnetic circuits

Unit V – Semiconductors and superconductors

Compound semiconductors – Hall effect – origin of energy band and energy gap
– Kronig penny model – Basic concepts superconductivity – transition temperature –
Meissener effect – Type I and II superconductors – high temperature superconducting
materials – 123 superconductor.

Text books
1. Materials Science – M Arumugam, Anuratha Printers, 1994.
2. Solid State Physics – S.O Pillai – Wiley Easton, 1994.

Reference
1 Solid State Physics – C Kittel 7th Edition – Wiley Eastern Ltd., 1987
2 Science of Engg. Materials – C M Srivgastava – Wiley Eastern Ltd., 1987
3 Elementary Physics – M Ali Omar – Addison Sesley Publishing Co.India,1990.

http://it.pec.edu 25/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC 2224 ENVIRONMENTAL SCIENCE

Unit I

Environmental segments – brief outline. Pollution – Definition – classification. Pollutants

– classification of pollutants.
Air pollution–I - Reactions in atmosphere – Sources of air pollution – Gaseous pollutants –
oxides of nitrogen, oxides of sulfur, oxides of carbon, hydrocarbons and particulates.

Unit II

Air pollution II – Greenhouse effect – Sources - Effect on Global climate-consequences.

Chlorofluro carbons- (CFC). Ozone depletion – Cause -Mechanism-Effects on
environment. Smog-Sulfurous or London Smog – Photochemical Smog or Los Angles
Smog –Effects on environment.
Acid rain – Theory of acid rain – Effects.

Unit III

Water pollution – Types of water pollution–Sources-Classification of water pollutants cause

and effect of :- (i) Inorganic pollutants and toxic metals,
(ii) Organic pollutants, (iii) Radioactive pollutants and (iv) Pesticides.

Unit IV

Pollution monitoring and control methods - Air pollution - Analysis of COX,

NOX, SOX, H2S, Hydrocarbons, particulate matter.
Water pollution. Monitoring pH, Dissolved oxygen –Winkler’s method - BOD, COD, TOC.

Unit V

Noise pollution – Sound levels – Sources of Noise – Effects of Noise – Noise

Limits – Some control measures
Basic concept of Environmental impact assessment – Types of impact – Quantifying specific
impact – Elementary aspects of impact identification and evaluation.

TEXT BOOKS:
1. Anil Kumar De, “Environmental Chemistry”, 3rd Edition, New Age International (P)
Ltd., Publishers, New Delhi (1996)
2. B K Sharma, “Environmental Chemistry” GOEL Publishing House, Meerut, (2000).

REFERENCE BOOKS:

1. Gilbert M. Masters, “Introduction to Environmental Engineering and Science”,

Prentice-Hall of India Pvt. Ltd., New Delhi, (1994).
2. S A Abbasi, “Environmental Pollution and its control”, Cogent International,
Pondicherry, (1998). (For Unit V)..
3. A textbook in Environmental Science, V Subramanian, Narosa Publishing
House, New Delhi.

http://it.pec.edu 26/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCC0125 Basic Engineering

Part-A CIVIL ENGINEERING.

Unit I

Buildings, Building Materials

Buildings-Definition-Classification according to NBC-plinth area, Floor area, carpet area,

floor space index-construction materials-stone, brick, cement, cement-mortar, concrete,
steel- their properties and uses.

UNIT II

Buildings and their components:

Buildings-Various Components and their functions.

Soils- classification and methods of improving bearing capacity of soils.
Foundations-Functions and classification.
Masonry-Types of stone and brick masonry.
Flooring-functions and types-cement, concrete, mosaic, granolithic-marble, timber and
granite flooring.
Roofs-Flat roofs - steel trusses - roof covering.

Unit III

Utilities and Services:

Surveying-classification, general principles of surveying – Basic terms and definitions in

chain, compass, leveling surveying and uses of surveying – definition, characteristics
and uses of contours.
Roads-types, Water bound macadam road, cement concrete road, bituminous road.
Bridges-types, T-beam, steel, arch, culvert and causeway.
Dams-Purpose, selection of site, types of dams - gravity and earthen dams..
Water supply-sources-surface and ground water quality and quantity requirements.
Rainwater harvesting.

Text Book:

1.Purushothama Raj.P., Basic civil engineering,3rd Edn., Dhanam Publications,

Chennai, 2001.
2. Natarajan, K V, Basic Civil Engineering, 11th Edition, Dhanalakshmi Publications,
Chennai, 2001.
Reference Books:

1. Rajpat, R K, Engineering Materials, S Chand & Co. Ltd., New Delhi, 2002
2. Punmia, B.C. etal, Surveying , Vol-I, Laxmi Publishers, New Delhi, 2002
3. Arora, S P and Bevidra, S P., Building Construction, Dhanpat rai & Sons, New Delhi,
2002.

http://it.pec.edu 27/123
 Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 0125 BASIC ENGINEERING

PART-B
MECHANICAL ENGINEERING

Unit IV

INTERNAL AND EXTERNAL COMBUSTION SYSTEMS:

Working principles of IC engines – Classification – Diesel and petrol engines: two
stroke and four stroke engines. Steam generators(Boilers) – Classification – Constructional
features (of only low pressure boilers) – Boiler mountings and accessories.

CONVENTIONAL POWER GENERATION SYSTEMS:

Hydraulic, steam and gas turbines power plants – Schemes and layouts – Selection
criteria of above power plants.

Unit -V

NON-CONVENTIONAL ENERGY SYSTEMS (Description only)

Solar thermal systems – Solar photovoltaic – Solar pond – wind, wave, tidal,
geothermal and ocean thermal energy conversion systems.

CASTING:
Green and dry sand moulding processes for ferrous and non-ferrous metals –
applications.

Unit – VI.

METAL JOINING:
Elements of arc and gas welding, brazing and soldering – Bolted joint types – Adhesive
Bonding; classification of adhesives – applications.

SHEET METAL PROCESSING:

Punching, blanking, shearing, bending, and deep drawing processes; descriptions and
applications

TEXT BOOKS:
1. Lindberg, R.A.Process and Materials of Manufacture, PHI.
2. Nagpal, Power Plant Engineering, Khanna Publishers, Delhi.

REFERENCES:
1. E1.Wakil, M.M.Power Plant Technology, Mc Graw Hill Book Co.
2. Campbell, J.S.Principles of Manufacturing Materials and processes, TMH.
3. Hajra Choudhry, et. A1, Workshop Technology, Media Promoters Publishers
Pvt. Ltd., Bombay.
4. Chapman, A.J.Production Technolgoy.

http://it.pec.edu 28/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 0016 ENGINEERING MECHANICS

Unit – I
Fundamental of Mechanics – Basic Concepts Force System and Equilibrium
Definition of Force, Moment and Couple, Principle of Transmissibility, Varignon’s
theorem, Resultant of force system – Concurrent and non concurrent coplanar forces,
definition of rigid body and degrees of freedom, Condition of static equilibrium for
coplanar force system, stability of equilibrium, concept of free body diagrams,
applications in solving the problems on static equilibrium of bodies.

Unit – II
Plane Trusses
Degrees of freedom, Types of supports and reactions, Types of loads, Analysis of
Trusses-method of joints, method of sections

Friction
Introduction, Static dry friction, simple contact friction problems, ladders, wedges, screws
and belt friction, introduction to virtual work principle

Unit – III
Properties of Surfaces
Properties of sections – area, centroids of lines, areas and volumes, moment of inertia-
first moment of inertia, second moment of inertia and product moment of inertia, polar
moment of inertia, radius of gyration, mass moment of inertia.

Unit – IV
Kinematics and Kinetics of Particles
Rectilinear motion, curvelinear motion, Relative motion, equations of motion,
D’Alembert’s principle, work, power, energy and efficiency – Conservative forces and
principle of conservation of energy, Impulse – momentum, Impact – Direct central impact
and oblique central impact.

Unit - V
Kinematics and Kinetics of Rigid bodies
Plane motion, Absolute motion, Relative motion, Translating axes and rotating axes,
work and energy, impulse and momentum

Text Books
1. Rajesekaran.,S and Sankara Subramanian., G., Engineering Mechanics, Vikas
Publishing House Private Ltd., 2002
2. Natesan, S C., Engineering Mechanics, Umesh Publications, New Delhi, 2002
Reference Books
1. Meriam, J.L., “Statics”, John Wiley, 2002
2. Meriam, J.L., “Dynamics”, John Wiley, 2002
3. Natarajan, K V., Engineering Mechanics, Dhanalakshmi Publishers, Chennai,
2003.

http://it.pec.edu 29/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

PHYSICS LABORATORY: UCC 0217

(ANY 10 EXPERIMENTS)

1 THERMAL CONDUCTIVITY – LEE’S DISC

2 THERMAL CONDUCTIVITY RADIAL FLOW
3 SPECTROMETER – PRISM AND HOLLOW PRISM
4 SPECTROMETER – GRATING
5 SPECTROMETER - ORDINARY & EXTRAORDINARY RAYS
6 NEWTON’S RINGS
7 AIR – WEDGE
8 POLARIMETER
9 I – H CURVE
10 FIELD ALONG THE AXIS OF COIL CARRYING CURRENT
11 MELDE’S STRING
12 KUNDT’S TUBE
13 LASER EXPERIMENT: Wavelength Determination Using Grating and Vernier
Calipers.
14 JOLLY’S EXPERIMENT FOR α
15 VIBRATION MAGNETOMETER – CALCULATION OF MAGNETIC MOMENT
AND POLE STRENGTH

http://it.pec.edu 30/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 0029 WORKSHOP PRACTICE

Sl.No. Trade List of Exercises

1. Fitting Study of tools and Machineries. Exercises on symmetric

joints and joints with acute angle.
2. Welding Study of arc and gas welding equipment and tools – Edge
preparation – Exercises on lap joint and V Butt joints –
Demonstration of gas welding
3 Sheet metal Study of tools and Machineries – exercises on simple
work products like Office tray and waste collection tray.
4. Carpentry Study of tools and Machineries – Exercises on Lap joints
and Mortise joints

LIST OF EXERCISES

I.Fitting

1.Study of tools and Machineries

2.Symmetric fitting
3.Acute angle fitting

II.Welding

1.Study of arc and gas welding equipment and tools

2.Simple lap welding (Arc)
3.Single V butt welding (Arc)

III.Sheet metal work

1.Study of tools and machineries

2.Funnel
3.Waste collection tray

IV.Carpentry

1.Study of tools and machineries

2.Half lap joint
3.Corner mortise joint.

http://it.pec.edu 31/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 0228 CHEMISTRY PRACTICALS

(Any 10 Experiments)

1. Determination of total hardness of water by EDTA method.

2. Determination of alkali by Flame photometer.

3. Estimation of iron by colorimetry.

4. Molecular weight determination of a polymer by viscometry.

5. Percentage composition of sugar solution by viscometry.

6. Determination of dissolved oxygen content in water.

7. Estimation of mixture of alkali (HCO3 + CO3 )

8. Determination of Pb in polluted water by conductometry.

9. Estimation of Fe2+ by Potentiometry.

10. Determination of COD of a waste water sample.

11. Determination of chloride content in water.

12. Determination of copper in brass.

13. Determination of available chlorine in bleaching powder.

http://it.pec.edu 32/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 3201 : MATHEMATICS - III

UNIT I

LAPLACE TRANSFORM: Definitions - Laplace transform of unit impulse and

step functions - Laplace transform of periodic functions - Exponential shift formula-
Initial and final value theorems - Laplace transform of derivatives and integrals -
Convolution theorem - Inverse Laplace transform - Methods of determining inverse
Laplace transform -Solution of linear differential equations using Laplace transforms.
(12 Hours)
UNIT II

FUNCTION OF A COMPLEX VARIABLE: Functions of a complex variable -

continuity, derivative and analytic function - Cauchy - Riemann equations – Necessary
and sufficient conditions for analyticity - Harmonic and orthogonal properties of real and
imaginary parts - Conformal mapping - Bilinear transformations. (12 Hours)

UNIT III

COMPLEX INTEGRATION: Cauchy’s theorem -Cauchy’s integral formula - Taylor’s

and Laurent series - Residue theorem - Contour integration round the unit circle and
semi-circular contour. (12 Hours)

UNIT IV

FOURIER SERIES: Dirichlet’s conditions - Expansion of periodic functions into

Fourier series- Change of interval- Half-range Fourier series. (10 Hours)

UNIT V

Complex form of Fourier series - Root mean square value - Parseval’s theorem on
Fourier coefficients - Harmonic analysis. FOURIER TRANSFORM: Definition and
properties - Fourier Integral theorem - statement - Fourier sine transform and cosine
transforms - Inverse Fourier transform. (12 Hours)

TEXT BOOKS

1. M.K.Venkataraman, 'Engineering Mathematics', Third Year Part A &B, The National

Publishing Company, Madras (1995).
2. S. Naryanan, T.K. Manicavachagam Pillai, and C. Ramanaiah, 'Advanced
Mathematics for Engineering students', C. Viswanathan & Co Pvt. Ltd., Madras (1985).

REFERENCE BOOKS:

1. Erwin Kreyszig, 'Advanced Engineering Mathematics', Wiley Eastern Ltd. (1985).

2. B.S.Grewal, 'Higher Engineering Mathematics', Khanna Publishers, Delhi (1985).

http://it.pec.edu 33/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 3032 / UIT 3032 : ELECTRONIC DEVICES AND CIRCUITS

UNIT I

DIODES AS AN ELECTORNIC CIRCUIT ELEMENT: Diode as a Circuit element,

Equivalent circuits, Elementary diode circuits, Half-wave rectifiers, Ripple factors,
Efficiency of rectification, clippers, capacitor input filters, Zener diode, Zener regulator,
series and shunt regulators.

UNIT II

SMALL SINGLE AMPLIFIERS: Small single equivalent circuit for BJT, BJT
amplifiers, Voltage gain, Current gain, input impedence for CE, CB & CC amplifiers,
Class A, Class B & Class C, Power amplifiers, FET amplifiers, Voltage gains, current
gain, input-output impedence of common drain configuration, multistage amplifiers,
Darlington pair.

UNIT III

OPERATIONAL AMPLIFIERS: Op-amp parameters, Op-amp circuits: Design of

inventing, Non-inventing amplifier, Frequency response, Voltage Follower, summer,
integrator, Differentiator, Difference amplifier, Instrumentation amplifier, Comparators,
Voltage to frequency converters, Analog multipliers and demultiplexers.

UNIT IV

FEEDBACK AMPLIFIERS AND OSCILLATORS: Feedback amplifiers, Four types

of feedback, Effect of feedback of a amplifier, performance and Distortion oscillators,
Condition for oscillators, Analysis and design of versions oscillators employing BJT,
FET and Op-Amp, LC-oscillators, frequency stability.

UNIT V

VOLTAGE REGULATORS: Regulator using op-amp IC regulators, production

switching for voltage regulators, feedback current building, Negative voltage regulators
using IC current boosting of IC regulators, Switching regulators.

TEXT BOOKS

1. Jacab Milman and Arvin Grabel, “Microelectronics”, McGraw Hill EDIT,

Fifth EDIT, 1998.
2. R. Boybested and Louis Nishalsky, “Electronic Devices and circuit Theory”.
Prentice Hall.

http://it.pec.edu 34/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 3083 : INTRODUCTION TO INFORMATION TECHNOLOGY

UNIT I
INTRODUCTION:Information Age; Responses – Information system; Infrastructure
and Architecture – IT support for organizations; Types of information systems –
Managing IT – Basic of computer hardware and software for IT infrastructure- input
devices, output devices, memory devices.

UNIT II

IT FOR TELECOM NETWORKS:Telecommunication system: Networks: Software;

Network processing strategy; Telecom applications; Internet and Intranet; Operation and
services provided; WWW; Intranets, ftp, Usenet, Remote login.

UNIT III

IT APPLICATIONS:Information system; GIS EDI and EFT; Extranets;

Implementation; Data, Knowledge and decision support; Decision making- and support
systems; Data visualization technologies; Knowledge Management- and Discovery and
analysis.

UNIT IV

INTELLIGENT SYSTEMS AND E-COMMERCE:AI and IS: Expert systems;

Intelligent agents; Virtual reality; Ethical and global issues; E-commerce: Business
applications: Market research and customer support Infrastructure, payments and other
support.

UNIT V

INFORMATION TECHNOLOGY AND SYSTEMS:Planning and Management:

Principles for IS planning: Role of IS and user departments; Resources; IT architecture;
Centralized and no centralized; Client/server; End user computing architecture;
Managing IS; Organizational structure; IS vulnerability; protection; Security; Network
Protection and Firewalls Risk management and cost-Benefit analysis.

TEXT BOOKS

1. Introduction to IT, E. Turban et al., John Wiley and sons, IC, 2000.
2. IT for management: Making connection for strategic Advantage, 2nd Edition, E.
Turban et al., John Wiley and sons, Inc., 2001.
3. IT, the breaking wave, Dennis, P., Curtin et al., Tata McGraw-Hill, 1999.
4. IS, A management perspective, Steven Alter, 1999.

http://it.pec.edu 35/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 3044 / UIT 3084 : DIGITAL COMPUTER FUNDAMENTALS

AND ARCHITECTURE

UNIT I

Digital Logic Fundamentals: revision of RTL, DTL, I2L, TTL, ECL, MOS, CMOS
logic families – revision of binary number systems, boolean algebra and logic gates –
simplification of boolean functions.

UNIT II

Combinational Circuits: adders – subtractors – code converters – binary parallel adder –

decimal adder – magnitude comparator – encoders – decoders – multiplexers –
demultiplexers – ROM - PLA.
Sequential Circuits: flip-flops – triggering – clocked sequential circuits – excitation
tables – flip-flop conversion – design procedure – registers – shift registers –
synchronous and asynchronous counters.

UNIT III

Processor Organization: general register organization – stack organization – instruction

formats – addressing modes – data transfer and manipulation – program control.
Pipeline and Vector Processing: parallel processing – pipelining – arithmetic pipeline –
instruction pipeline – RISC pipeline – vector processing – array processors.

UNIT IV

Memory Organization: memory hierarchy – main memory – auxiliary memory –

associate memory – cache memory – virtual memory.

UNIT V

Input-Output Organization: input-output interface – asynchronous data transfer –

modes of transfer – priority interrupt – DMA – IOP – serial communication.

TEXT BOOKS

1. M. Morris Mano, “Digital Logic and Computer Design”, Prentice-Hall of India Pvt.
Ltd., 2002.
2. M. Morris Mano, “Computer System Architecture”, 2nd edition, Prentice-Hall of India
Pvt. Ltd., 1999.

REFERENCE BOOKS:
1. Carl Hamacher, Zvonko G. Vranesic, Safwat G. Zaky, “Computer Organization”, 4th
edition, McGraw-Hill, 1996.

http://it.pec.edu 36/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 3045 / UIT 3085 : DATA STRUCTURES

UNIT I

Introduction, algorithmic notation, Space and Time analysis of an algorithm, information

and its storage representation, Representation and its manipulation of strings, Pattern
Matching. Searching and sorting techniques.

UNIT II

Linear data structures, array of structures, stacks, application of stacks, queues, priority
queues, pointers and linked allocation, Singly Linked List, linked stacks, Linked queues,
Polynomial Addition, Sparse matrices, Equivalence relations, Doubly Linked List,
Circular Linked List, Dummy headed Linked List – Garbage Collection and Compaction

UNIT III

Non-linear data structures, Trees – Binary tree, Terminology, Representation, Traversal,

Applications. Graph – Terminology, Representation, traversals, spanning trees, shortest
path and Transitive closure, Topological sort.

UNIT IV

Symbol tables – Static, Dynamic and Hash tables

UNIT V

File structures, external storage devices, sequential files, indexed sequential files, direct
files, external searching, linear and virtual hashing, virtual memory, VSAM Files,
multiple key access.

TEXT BOOKS
1. Ellis Horowitz and Sartaj Sahni “Fundamentals of Data Structures” Galgotia
Booksource, 1995.
2. Robert Kruse ‘C.L. Tondo and Bruce Leung, “Data Structures and Program Design
in C”, 2nd edition, Pearson Education Asia, 2001.

REFERENCE BOOKS

1. Jean Paul Tremblay and Paul G. Sorenson, “An Introduction to data structures
with applications” 2nd edition, Tata McGraw-Hill, 2001
2. D. Samanta, “Classic Data structures”, Prentice-Hall of India private ltd., 2001.

http://it.pec.edu 37/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 3086 : BUSINESS PROCESS

UNIT I

Nature and Types of Business Organizations – Introduction to Business Process -

Organization Structure – Definition – Complexity – Formalization – Outcomes for
individuals – Size – Technology – Internal culture – Environment – National cultures –
IT Industry Scenario.

UNIT II

Recognizing a Creation Company - The WHOOSH – Beginners mind - Creation

Company Vs. Compliance Company.

UNIT III

Becoming a Creation Company – Choosing to change – the art of collaboration – Models.

Leading a Creation Company – Freedom and Focus – Creation Leadership.

UNIT IV

Introduction to Business Process Reengineering – Business Process Reengineering

through IT – People view – Case Study – Empowering through IT.

UNIT V

Introduction to e-Business – Rules of e-Business – e-business execution framework -

Trend spotting – Construction steps of e-business design – Case studies – Constructing
the e-business architecture.

TEXT BOOKS:

1. Richard H. Hall,Organizations, Structures, Processes, and Outcomes, Pearson

Education, 2001.
2. M. S. Jayaraman et. al., Business Process Reengineering, Tata McGraw Hill
publications, 2001.
3. Tom McGehee, Whoosh: Business in the Fast Lane, Perseus Publication, 2002.
4. R. Kalakota and M. Robinson, e-Business : Roadmap for Success, Pearson
Education, 2000.

http://it.pec.edu 38/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 3037 : ELECTRONIC CIRCUITS LABORATORY

1. VI characteristics of Semiconductor and Zener diodes

2. Diode clipping and clamping circuits
3. Bridge rectifier – Efficiency, Ripple factor with and without Capacitance input
filter
4. Static characteristics of common emitter transistor configuration and
determination of h parameters.
5. Static characteristics of common base transistor configuration and determination
of h parameters.
6. Drain characteristics of FET and determination of Drain resistance, Mutual
conductance and Amplification factor.
7. V.I. Characteristics of silicon controlled rectifier and Uni-Junction transistor.
8. R.C. Coupled amplifier: Determination of Zin, Zout and frequency response.
9. LC oscillator
10. Class B push – pull power amplifier and to find the efficiency as a function of
load.
11. Applications of opamp (adder, subtractor, integrator and differentiator)
12. Wien’s bridge and R.C Phase shift Oscillator using opamp.

--**--

UCS 3048 / UIT 3088 : DIGITAL LAB

1. Implementation of logic circuits using gates

. Full adder/full subtractor
. Implementation of logic functions using universal gates only
. Design of priority encoder
. Design of demux using nor gates only
. Code convertor

2. Implementation of circuits using MSI

. Synchronous counters
. Asynchronous counters
. Binary multiplier
. Decimal Adder
. Universal shift register
. Design of Arithmetic unit

3. Interface experiments with MSI

. design of ALU
. Interface of ALU with memory

4. Interface of ALU with registers

--**--

http://it.pec.edu 39/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 3049 / UIT 3089 : DATA STRUCTURE LAB

Implementation of stacks, queues, sorting and searching techniques, singly linked

list, doubly linked list, circular linked list, circular queue, de-queue, priority queue,
polynomial addition, building a binary tree, binary search tree, expression evaluation
using binary tree, implementing graph, finding shortest path.

UCC 30810 : GENERAL PROFICIENCY - I

UNIT 1

BASICS OF COMMUNICATION : Essential Communication Skills; Elements of

Communication; Basic Models of Communication; Frames of Reference; Purposive
Communication; Channels of Communication; Developing Good Communication Style.

UNIT II

LANGUAGE DEVELOPMENT THROUGH READING : TOEFL based Reading

Comprehension; Current Affairs; Vocabulary Building; Idioms and Phrases; Basic
Phonetics.

UNIT III

SPEAKING PRACTICE : Dialogue/Conversation; Types of Conversations; Listening

Skills; Telephone Etiquette; Public Speaking; Debate.

UNIT IV

QUANTITATIVE ANALYSIS : Aptitude Tests

REFERENCE BOOKS :

1. Bovee, Courtland L and John V Thill. Business Communication Today. Pearson

Education, 2003.
2. Rymniak, Marilyn J and Janet A Shanks. TOEFL CBT Exam. Simon and
Schuster, 2002.
3. Lewis, Norman. Word Power Made Easy. Bloomsbury, 2003.
4. Nicholls, Anne. Mastering Public Speaking. Jaico Publishing House, 2003.
5. Jones, Daniel. Cambridge English Pronouncing Dictionary. CUP, 2003.
6. Aggarwal, R.S. Quantitative Aptitude. S. Chand & Co., 2004.

http://it.pec.edu 40/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 4201 / UIT 4201 : DISCRETE MATHEMATICS AND GRAPH THEORY

UNIT I
Connectives, Statement formulae, Equivalence of Statement formulae, Functionally
complete set of connectives-NAND and NOR connectives, implication, Principal
conjunctive and disjunctive normal forms

UNIT II
Inference calculus-Derivation process-Conditional proof-Indirect method of proof-
Automatic theorem proving-Predicate calculus

UNIT III

Partial ordering-Lattices-Properties-Lattices as algebraic system-sub lattices-Direct

product and homomorphism-Special lattices-Complemented and Distributive lattices

UNIT IV

Graphs-Applications of graphs-degree-pendant and isolated vertices-isomorphism-sub

graphs-walks-paths and circuits- connected graphs –Euler graphs-operations on graphs-
More on Euler graphs –Hamilton paths and circuits-complete graph

UNIT V

Trees-properties of Trees-Pendant vertices in a Tree-Distance and Center in a Tree-rooted

and binary trees-spanning trees-Fundamental Circuits-Distance between spanning trees-
shortest spanning trees-Kruskal algorithm

TEXT BOOKS

1. J.P.Tremblay and R.Manohar, "Discrete Mathematical Structures with

applications to Computer science", Tata McGraw-Hill Publishing company pvt.
Ltd., New Delhi, 1997.
2. Narsingh Deo, "Graph Theory with applications to Engineering and Computer
science", Prentice-Hall of India pvt. Ltd., New Delhi, 1987.

REFERENCE BOOKS

1. Kenneth H.Rosen, "Discrete Mathematics and its Applications", Fifth edition,

Tata McGraw-Hill Publishing company pvt. Ltd., New Delhi, 2003.
2. C.L.Liu, "Elements of Discrete Mathematics", Second Edition, McGraw-Hill
Book Company, New York 1988.
3. F.Harary, "Graph Theory", NarosaPublishing House, New Delhi –Chennai-
Mumbai, 1988.
4. Douglas B.West,"Introduction to Graph Theory", Second Edition (Indian)
Pearson Education Singapore) Pvt.Ltd, 2002.

http://it.pec.edu 41/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 4032 : PRINCIPLES OF COMMUNICATION
UNIT I

Introduction : Communication principles – block diagram of modem communication

system – study of electromagnetic spectrum- use of different spectra for different
applications

UNIT II
Modulation methods : Need for modulation – amplitude and modulations (FM and PM)
– mathematical equations – spectra – side bands – bandwidth – power relations –
modulation index- phase diagram – comparison of AM, FM, PM. Sampling theorem –
analog pulse modulations- PAM and PTM (PPM , PDM or PWM) – digital pulse or
coded modulations – PCM, properties like spectra , waveform, BW and SNR. CW
modulation for digital signals – ASK, FSK,PSK – multiplexing systems for pulsed and
CW modulations – TDM and FDM – comparison of textures and merits

UNIT III
Modulators : Generation of AM waves – linear modulations , collector, base emitter
modulation . square law modulations – diode and balanced modulators – suppression of
carrier. Generation of FM waves – Reachance modulator method – Armstrong method –
conversion of FM to PM and PM to FM waves. Generation of PAM,PPM, and PWM
waves- conversion of PWM wave to PPM wave

UNIT IV

Demodulation methods / Detectors : Demodulation of AM waves – Linear detectors –

synchronous and envelope detectors – performance comparison – Demodulation of
FM waves – slope detector – balanced slope detector – Foster – Seely discriminator
– ratio detector – demodulation of PAM , PPM,PWM ,PCM & PDM – errors

UNIT V
Communication systems : Transmitters and receivers – class RF amplifier – class B
push pull linear amplifier – lowlevel and high level modulation systems – their
comparison – AM transmitter – FM transmitter – Direct and asynchronous
transmitter – straight receiver – superheterodyne AM receiver – communication
receiver – diversity reception – FM receivers

TEXT BOOKS
1. Deshponde.N.D etal , 'Communication Electronics', TataMcGraw Hill publishing,
1989.
2. Kennedy Davis, 'Electronic Communication systems', Tata McGraw Hill
Publishing Company Limited , New Delhi, 1999.
3. Anokh Singh, 'Principles of Communication Engineering', Schand & co., 1991
4. Roddy D and Coolen .J , 'Electronic Communications' , Prentice Hall of India Pvt.
Limited , 1987.

http://it.pec.edu 42/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 4042 / UIT 4083 : MICROPROCESSORS AND APPLICATIONS

UNIT I

INTRODUCTION TO MICROPROCESSORS : Concept and need for microprocessors –

evolution - general architecture - control unit – internal registers – arithmetic and logic
unit – state transition – architecture of 8085 and 8086 – timing and sequencing.

UNIT II
INSTRUCTION SET AND PROGRAMMING : Addressing modes – instruction set
summary of 8085 – overview of 8086 instruction set – assembly language programming:
arithmetic and logic – code conversion – counters and delay routines - stacks and
subroutines.

UNIT III
INTERRUPTS AND DMA : Data transfer techniques – interrupt structure of 8085 –
overview of 8086 interrupts – interrupt vectors – interrupt service subroutines – priority
– multiple interrupts – applications – real time clock - concept of DMA data transfer

UNIT IV

MEMORY & I/O INTERFACING : Types of memory – memory mapping – address

decoders – dynamic RAM interfacing – concept of I/O map – types – I/O decode logic –
interfacing key switches and LEDs – programmable peripheral interface 8255 –
programmable interval timer 8253 – programmable interrupt controller 8259 –
programmable DMA controller 8237

UNIT V

SERIAL COMMUNICATION AND MICROPROCESSOR APPLICATIONS : Concept of

Serial Communication – 8251 USART – RS232C interface – traffic light control – data
acquisition system – temperature monitoring system – architectural features of Pentium
and 8051 microcontroller.

TEXT BOOKS:

1. Ramesh S.Gaonkar, “Microprocessor Architecture, Programming and Applications

with 8085”, Penram Publications, 2002
2. A.K.Ray and Bhurchandi , “Advanced Microprocessors And Peripherals”, Tata
McGraw Hill, 2000

REFERENCE BOOKS

1. Douglas V.Hall, “Microprocessors And Interfacing Programming and Hardware”,

Tata McGraw Hill, 2003
2. Ajit Pal, “Microprocessors Principles & Applications” , Tata Mcgraw Hill, 2001

http://it.pec.edu 43/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 4044 / UIT 4084 : DESIGN AND ANALYSIS OF ALGORITHMS

UNIT I

Analysis of algorithms : Introduction - analyzing control structures - average case

analysis solving recurrences. Analysis : Sorting – heap, radix, insertion, selection and
bubble. Searching – binary, sequential and fibonacci.

UNIT II

Divide and Conquer method : General method – binary search – finding maximum and
minimum – merge sort and quick sort – strassen’s matrix multiplication. Greedy method
: General method – Knapsack problem – minimum spanning tree algorithms – single
source shortest path algorithm – scheduling, optimal storage on tapes, optimal merge
patterns.

UNIT III

Dynamic programming : general method – multi stage graphs – all pairs shortest path
algorithm – 0/1 Knapsack and traveling salesman problem – chained matrix
multiplication – approaches using recursion – memory functions. Basic search and
traversal technique : the technique – and/or graphs – biconnected components – depth
first search – topological sorting – breadth first search.

UNIT IV

Backtracking : The general method – 8 queens problem – sum of subsets – graph

coloring – Hamiltonian cycle – Knapsack problem.

UNIT V

Branch and bound method : 0/1 Knapsack problem – travelling salesman problem.
TEXTBOOKS

1. Gilles Brassard & Paul Brately, “Fundamentals of algorithms”, PHI, 1997.

2. E. Horowitz & Sahini, “Fundamentals of Computer Algorithms”, Galgotia
Publications. 1997.
3. S.E.Goodman and S.T. Hedetniemi, “ Introduction to the Design and Analysis of
Algorithms”, McHraw Hill.

REFRENCE BOOKS

1. Aho, Ullman & Hopcraft, 'The Design and analysis of algorithms', Addison
Wesley publication 1974.
2. Sara Baase, “Computer Algorithms, Introduction to Design and Analysis”,
Addison-Wesly Publishing Company – 1991.

http://it.pec.edu 44/123
 Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 4043 / UIT 4085 : OPERATING SYSTEMS

UNIT I
Introduction: Mainframe Systems -– Desktop Systems – Multiprocessor Systems – Distributed
Systems – Clustered Systems - Real Time Systems –– Hardware Protection – System
Components – Handheld Systems -Operating System Services – System Calls – System Programs
– System Structure – Visual Machines - System Design and Implementation.

UNIT II
Process Management: Process Concept – Process Scheduling – Operation on Process –
Cooperating Processes – Interprocess Communication – Threads – Overview –
Multithreading Models - Process Synchronization – The Critical Section Problem –
Synchronization Hardware – Semaphores – Classical Problems of Synchronization –
Deadlocks – System Model – Deadlock Characterization – Methods for handling Deadlocks
– Deadlock Prevention – Deadlock Avoidance – Deadlock Detection –Recovery from
Deadlock.

UNIT III
CPU Scheduling and Memory Management: CPU Scheduling - Basic Concepts –
Scheduling Criteria – Scheduling Algorithms – Multiple- Processor Scheduling –
Real-Time Scheduling – Algorithm Evaluation - Memory Management -Background
– Swapping –Contiguous Memory Allocation –Paging - Segmentation –
Segmentation with paging.

UNIT IV
Virtual Memory: Virtual Memory – Demand paging – Page Replacement –
Thrashing – Allocation of Frames - Other Considerations - File Systems – File
Concepts -Access Methods – Directory Structure – File System Mounting – File
Sharing – Protection - File System Structure – File System Implementation –
Recovery.

UNIT V
Files and Secondary Storage Management: Allocation Methods - Free-Space Management
– Directory Implementation – Recovery - Disk Structure – Disk Scheduling – Disk
Management – Swap Space management – Case Study: Linux System – Components of a
Linux Systems – Process Management – Process Scheduling – Security.

TEXT BOOK
1. Silberschatz , Galvin, GAGNE “Operating System Concepts” , Sixth edition, John
wile & Sons, INC, 2002.

REFERENCE BOOKS
1. D.M.Dhamdhere, “Operating Systems”, Tata McGraw Hill, 2002.
2. Charles Crowley, “Operating Systems: A Design Oriented Approach”, Tata
McGraw Hill 1999.

http://it.pec.edu 45/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
3. Andrew S.Tanenbaum, “Modern Operating Systems”, Prentice Hall of India,
1995.
4. William Stallings, “Operating Systems”, Prentice Hall of India, 1997.

http://it.pec.edu 46/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 4086 : FORMAL LANGUAGES AND COMPILERS
UNIT I

Finite automata and Regular Expressions: Deterministic and Non-Deterministic Finite

Automata, Finite Automata with e-moves, regular expressions - equivalence of NFA and
DFA, two-way finite automata, Moore and Mealy machines, applications of finite
automata

UNIT II

Regular sets and Context Free Grammars: Properties of regular sets, context Free
Grammars - derivation trees, Chomsky Normal Form and Greibach Normal Form,
ambiguous and unambiguous grammars, minimization of finite automata

UNIT III

Basic Parsing Techniques: Shift reduce parsing, operator precedence parsing, Recursive
descend parsing, predictive parsing, LR parsing, Simple LR parsing, canonical LR
parsing, LALR parsing

UNIT IV

Syntax Directed Translation Schemes: Implementation of Syntax Directed Translator,

Intermediate code, Representations of intermediate code, Translation of Assignment
Statements, Boolean Expressions, Flow Control Statements, Array References in
arithmetic expressions, Declaration Statements

UNIT V

Pushdown Automata and Parsing Algorithms: Pushdown Automata and context-free

languages, Top-down parsing Bottom-up parsing, properties of CFL, Applications of
pumping lemma, closure properties of CFL and decision algorithms

TEXT BOOKS

1. John E.Hopcroft and Jeffrey D.Ullman, "Introduction to Automata Theory, Languages

and Computation", Narosa Publishers, 2002
2. A.V.Aho, J.D.Ullman, "Principles of Compiler Design", Addison Wesley, 1998

REFERENCE BOOKS:

1. Michael Sipser "Introduction to the theory of Computations", Brooks/Cole Thomson

Learning, 1997
2. John C.Martin, "Introduction to Languages and the Theory of Computation", Tata
McGraw-Hill,2003

http://it.pec.edu 47/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
3. Alfred Aho, Ravi Sethi, V.Jeffrey Ullman D. "Compilers Principles, Techniques And
Tools", Addison_Wesley, 1988

UIT4037 : COMMUNICATION LAB

1. AM using IC version – demodulation

2. Pre – emphasis and de emphasis
3. Narrow band and wide band FM
4. PCM encoder and decoder
5. Study of ASK,FSK and PSK
6. TDM and demultiplexing
7. Study of digital transmission using digital transmission analyzer
8. Delta modulation and adaptive delta modulation
9. Study of modern modulation techniques like GMSK

UCS 4047 / UIT 4088 : MICROPROCESSOR LABORATORY

LIST OF EXPERIMENTS
1. Study of 8085 Microprocessor trainer kit
2. Assembly language programming: arithmetic
3. Assembly language programming: block operations
4. Assembly language programming: code conversion
5. Assembly language programming: sorting and searching
6. Digital clock simulation
7. Printer interfacing
8. Serial communication
9. Elevator simulation
10. Traffic light control
11. Music synthesizer
12. ADC & DAC interfacing
13. Stepper motor and DC motor interfacing
14. 8086 assembly language programming using MASM
15. Assembly language programming using 8051

UCS 4048 / UIT 4089 : OPERATING SYSTEMS LAB

LIST OF EXPRIMENTS
1. Basic UNIX commands
2. Shell Programming
3. Implementation of scheduling algorithms.
4. Simulation of Paging, Segmentation.
5. File systems.
6. Process management – Fork-Exec.
7. Message queues, Pipe, FIFO’s
8. Signals.
9. Shared memory and Semaphores

http://it.pec.edu 48/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCC 40810 : GENERAL PROFICIENCY - II

UNIT I

IMPORTANCE OF COMMUNICATION : Introduction; Verbal and Non-verbal

Codes of Communication; Barriers to Communication; Self-Assessment; SWOT
Analysis; Identifying Strengths and Weaknesses.

UNIT II

PERSONALITY DEVELOPMENT : Body Language; Non-verbal Skills; Leadership

Qualities; Emotional Quotient; Effective Time Management; Surviving Stress;
Overcoming Failure; Professional Ethics

UNIT III

VERBAL COMMUNICATION : Social Exchanges; Planned Speech; Extempore;

Basics of Attending & Organizing Meetings; Informal Discussions

UNIT IV

QUANTITATIVE ANALYSIS : Aptitude Tests

REFERENCE BOOKS

1. Mohan, Krishna and Meera Banerji. Developing Communication Skills.

Macmillan, 2002.
2. Leigh, Andrew and Michael Maynard. The Perfect Leader. Random House
Business Books, 1999.
3. Minchinton, Jerry. Maximizing Self-confidence. Jaico Publishing House, 2003.
Thorpe, Edgar. Course in Mental Ability and Quantitative Aptitude. Tata McGraw-
Hill, 2003.

http://it.pec.edu 49/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 5201 : MATHEMATICAL STATISTICS AND NUMERICAL METHODS

UNIT I

SOLUTION OF ALGEBRAIC EQUATIONS AND SOLUTION OF LINEAR

SIMULTANEOUS EQUATIONS: The method of Bisection, the method of false
position, Newton-Raphson method, Gauss elimination method, Crout’s reduction, Gauss
- Seidel Iterative method - Power method for finding the numerically largest eigen value.

UNIT II

INTERPOLATION, DIFFERENTIATION AND INTEGRATION: Interpolation by

Newton’s forward and backward difference formulae for equal intervals, Lagrange’s
interpolation formula for unequal intervals, Differentiation based on finite differences to
find first and second order derivatives, Integration by Trapezoidal and Simpson’s 1/3
rule.

UNIT III

RELIABILITY Concept of Reliability, Reliability and Availability of systems,

Maintainability, Preventive maintenance

UNIT IV

QUALITY CONTROL Introduction, Process control, Control charts for variables and
attributes ( X , R, p, np, c charts), Operating characteristic curves.

UNIT V

QUEUEING THEORY The Birth-Death process (M/M/1/∞, M/M/c/∞, M/M/1/N,

M/M/c/N (N>c), M/M/s/s, M/M/∞ models only), Pollaczek-Khinchine formula.

TEXT BOOKS:

1. P. Kandasamy, K. Gunavathy and K. Thilagavathy, Numerical Methods, S. Chand

& Company Ltd, New Delhi. (For Unit I and II)
2. E. Balagurusamy, Reliability Engineering, Tata McGraw-Hill Publishing
Company Limited, 1984. (for Unit III)
3. S.P.Gupta, Statistical Methods, Sultan Chand & Sons, New Delhi (for Unit IV)
4. D.Gross, and C.M.Harris, Fundamentals of Queueing Theory, 2nd edition, Wiley,
New York, (1985). (for Unit V)

http://it.pec.edu 50/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 5032: COMMUNICATION ENGINEERING

UNIT I

INTRODUCTION : Definition of communication system – classification of

communication systems – need – principles and applications.

UNIT II

CELLULAR MOBILE COMMUNICATION : Basic cellular system – performance

criteria- uniqueness of mobile radio environment – operation of cellular system -
elements of cellular mobile radio – Hand off – frequency management and channel
assignment.

UNIT III

RADAR SYSTEM : Radar Block diagram and operation – radar frequencies – radar
range equation. Prediction of range performance – minimum detectable signal – radar
cross section of targets, cross section fluctuations – transmitter power, pulse repetition
frequency and range ambiguities – system losses and propagation effects.

UNIT IV

SATELLITE COMMUNICATION SYSTEM : Elements of orbital mechanics –

communication satellite design – link design and satellite based personal communication
CEO, ICO, GEO systems. VSAT ultroules and terminals, INTELSAT, IMMARSAT and
INSAT.

UNIT V

FIBER OPTICAL COMMUNICATION SYSTEM : Advantages of optical fiber

communication – need – principle of light transmission through a fiber – fiber medium –
light sources – photo detectors – Application and future developments. Power budget
analysis and livle design.

REFERENCE BOOKS:

1. William C.Y. Lee, 'Mobile Cellular Telecommunication Systems', McGraw Hill

International Edition, 1990.
2. M.I. Skolnik, 'Introduction to Radar Systems', McGraw Hill, II Edition.
3. D. Reddy, 'Satellite Communications', Prentice Hall, 1989.
4. T. Pratt and C.W. Bostain, 'Satellite Communication', John willy & Sons, 1986.
5. Gerd Keiser, ' Optical fiber communications', McGraw Hill International Edition,
1991.
6. John. K. Senior, 'Optical Fiber Communications Principles and Practice', 2nd
Edition Prentice Hall International 1992.

http://it.pec.edu 51/123
 Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 5043 / UIT 5083 : VISUAL PROGRAMMING

UNIT I

Introduction to Windows Programming: Different paradigms of programming –

Comparison – Event driven programming – Windows programming fundamentals – Data
types – Resources – Windows messages – Device contexts – Document interface –
Dynamic linking libraries.

UNIT II

Visual Basic Programming: Creating and using Controls – Menus and Dialogs –
Managing projects – Programming fundamentals – Objects and instances – Programming
user events – Using custom controls and grid control – inbuilt and user defined functions
- Debugging - Creating graphics for application – Displaying and printing information –
File system controls - Accessing databases with the data controls – VB and the Internet.

UNIT III

Visual C++ Programming: Visual C++ components – Developing simple applications

– Microsoft Foundation classes – Controls – Message handling - Document-view
architecture – Dialog based applications – Mouse and keyboard events – Reading and
writing documents – SDI and MDI environments.

UNIT IV

Advanced Features in VB and VC++: Creating user defined DLL’s – Dynamic data
transfer functions – User interface classes – Database management with ODBC – Object
Linking and Embedding – Communicating with other applications.

UNIT V

Visual J++: Introduction to VJ++ - Applet Wizard – Handling events – Multithreading –

Animation Techniques – Animating images – Applets and networking.

TEXT BOOKS
1. Charles Petzold, “Windows Programming”, Microsoft Press, 1995.
2. Gray J. Bronson, “Afirst book of Visual C++”, Vikas Publishing House, 2000.
3. Lars Klander, “Core Visual C++ 6”, Pearson Education Asia, 2000.
4. Deitel and Deitel, T.R. Nieto, “Visual Basic 6 – How to Program”, Prentice Hall
of India, 1999.
5. H.M. Deitel and P.J. Deitel, “Java how to program with an introduction to Visual
J++”, Prentice Hall, 1998.

REFERENCE BOOKS
1. C.H. Pappas, W.H. Murray, III “Visual C++: The Complete Reference”, Tata
McGraw-Hill Publishing Company, 1999.

http://it.pec.edu 52/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
2. G. Cornell, “Visual Basic 6”, Tata McGraw Hill,1998.
3. David Kruglirski. J, “Inside Visual C++”, Microsoft press, 1993.
UIT 5084 : OBJECT ORIENTED PROGRAMMING
UNIT I

Limitations in structured programming-Characteristics of Object Oriented Language – data types

– loops – pointers – arrays – structures – functions – Classes – Objects.

UNIT II

Operator overloading – Inheritance – Polymorphism – Templates – Exception Handling – class

Hierarchies – library organization and containers – Strings – Stream – Design and programming.

UNIT III

Java vs. C++ - Java on the Internet – Exception handling – Multithreading and persistence – Java
keywords and flow control – Garbage collection – packages – composition vs. inheritance.

UNIT IV

Final declaration – Interfaces and inner classes – Java I/O classes – Run time type
identification – User Interface design basics with swing – JAR files.

UNIT V

Network programming with sockets – Applets – Abstract window tool kit – JDBC database
programming – Introduction to Servlets –RMI

Note: Unit I & II deals with C++ and Java

Unit III, IV & V deals with Java.

TEXT BOOKS :

1. Bjarae Stroustrup, “The C++ Programming Language”, (3rd and Special

Edition) Addison Wesley, 2000
2. Bruce Eckel, “Thinking in Java”, (3rd Edition) Prentice Hall PTR, 2002

REFERENCE BOOKS:

1. Robert Lafore, “Object Oriented Programming in Turbo C++”, Galgotia

publications, 1998
2. E. Balaguruswamy, “Programming with Java” (2nd Edition), Tata McGraw
Hill Publications Limited, 1999.

http://it.pec.edu 53/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 5036 : COMMUNICATION ENGINEERING LAB

1. Simulation of different communication systems and evaluating their

performance
. cellular mobile communications
. different radar systems
. sattelite link budget analysis
. fibre optical communication systems

2. Handoff ad frequency reuse analysis

3. Experiments based on radar concepts
4. Simulation of LEO,GEO satellite systems
5. Power budget analysis and link design

UCS 5047 / UIT 5087 : VISUAL PROGRAMMING LAB

LIST OF EXPERIMENTS

1. VISUAL BASIC
i. Simple programs with control structures
ii. Adding menus to forms
iii. Creating dialog boxes with various options
iv. MDI applications
v. Writing code for various keyboard and mouse events
vi. OLE container control
vii. Simple programs with classes and objects
viii. Data access through Data control, DAO and ADO.

2. VISUAL C++

i. Creating applications with App wizard

ii. Drawing in documents
iii. Working with MFC
iv. Creating simple SDI and MDI applications
v. Exception handling
vi. Loading - Editing and - Adding resources - Linking resources To
applications
vii. Drawing bitmaps
viii. Threads
ix. OLE
x. Active X
xi. DLL's

http://it.pec.edu 54/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
1. VISUAL J++

i. Applet programs – Animating images, Multithreading

UIT 5088 : OBJECT ORIENTED PROGRAMMING LAB

Programs in C++

Programs using classes & objects, constructors & destructors, operator

overloading, inheritance, polymorphism & virtual functions, I/O streams, templates and
exception handling.

Programs in JAVA

Programs using
1. Applets
2. Layouts: Flow Layout, Border Layout, Grid Layout, Grid Bag Layout,
Card Layout
3. AWT controls: Scrollbar, Choice, List, Checkbox
4. Swings
5. Data gram sockets and Data gram pockets: Chat application
6. JDBC
7. RMI
8. Servlets & HTML

UCC 5089 : GENERAL PROFICIENCY - III

UNIT I
COMPOSITION ANALYSIS : Technical and Non-technical Passages (GRE Based);
Differences in American and British English; Analyzing Contemporary Issues;
Expanding Terminology

UNIT II
DEXTERITY IN WRITING : Importance of Writing; Written vs. Spoken Language;
Formal and Informal Styles of Writing; Resources for Improving Writing; Grammar and
Usage; Letter-writing; Application Essays; Project Proposals

UNIT III
PRESENTATION SKILLS : Collecting and Organizing Materials; Audience; Content;
Rehearsing; Delivering Matter; Questions; Controlling Anxiety; Seminar Presentations
(Subject Oriented/ General Topics); Language lab Practice

UNIT IV
QUANTITATIVE ANALYSIS : Aptitude Tests; Puzzles; Psychometric Tests

REFERENCE BOOKS
1. Bhatnagar, R.P and Rajul Bhargava. English for Competitive Examinations.
Macmillan, 1999.

http://it.pec.edu 55/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
2. Thorpe, Edgar and Showick Thorpe. Objective English. Pearson Education, 2004.
3. Staff of Kaplan. GRE Exam 2004. Simon and Schuster, 2003.
4. Leigh, Andrew and Michael Maynard. The Perfect Presentation. Random House
Business Books, 1999.
5. Thorpe, Edgar. Test of Reasoning. Tata McGraw-Hill, 2003.
UCS 5044 / UIT 6081 : COMPUTER HARDWARE AND TROUBLESHOOTING

UNIT I

PC HARDWARE OVERVIEW: Introduction – Basic Parts of PC – Functional block

diagram – system board – Microprocessor – Interrupts – DMA – SMPS – BIOS – POST
sequence - System configuration – Memory – Mass storage – I/O interface standards

UNIT II

BUS STANDARDS and NETWORKING: ISA – PCI – SCSI – IDE – USB –

comparative study and characteristics – Network Interface Cards – Cables and connectors
– MODEM – AT command set

UNIT III

PERIPHERAL DEVICES & DISPLAY ADAPTERS: Functional descriptions of

keyboard – mouse – printers – joystick – scanners – CGA – SVGA

UNIT IV

MASS STORAGE DEVICES: Floppy disk and drive – Hard disk and drive – MFM and
RLL recording standards – CD technology – DVD technology – pen drives – tape drives

UNIT V

TROUBLESHOOTING & TOOLS: In-Circuit Emulators – Logic State/Timing

Analysers – Digital Multimeters – CROs – Signature Analysers – Troubleshooting
problems of system boards, add on cards and peripherals.

TEXT BOOKS

1. Hans Peter Messmer, “Indispensable PC Hardware Book”, Pearson Education, 4th

edition 2003
2. Govindarajulu, “IBM PC and Clones” Tata McGraw Hill, 3rd edition

REFERENCE BOOKS

http://it.pec.edu 56/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
1. Barry Brey, “The Intel Microprocessors 8086/88, 80186/188,80286,
80386,80486, PENTIUM and PENTIUM PRO architecture, Programming and
Interfacing”, 6th edition, PHI, 2002
2. Ed Tittel, David Johnson, “Networking Essentials: Study Guide”, Comdex
Computer Publishing, 1998
3. Scott Muller, “Upgrading and Repairing PCs”, 15th edition, Que

UCS 6042 / UIT 6082 : DATABASE MANAGEMENT SYSTEMS

UNIT I

Introduction to Database Systems: Overview – Data Models – Database System

Architecture – History of Database Systems. Entity-Relationship Model: Basic Concepts
– Constraints – Keys – Design Issues – Entity Relationship Diagram – Weak Entity Sets
– Extended E-R Features – Design of an E-R Database Schema – Reduction of E-R
Schema to Tables – The Unified Modeling Language UML.

UNIT II

Relational Model: Structure of Relational Databases – Relational Algebra – Extended

Relational Algebra Operations – Modification of Database – Views – Tuple Relational
Calculus – Domain Relational Calculus. SQL: Background – Basic Structure – Set
Operations – Aggregate Functions – Null Values – Nested Subqueries – Views –
Complex Queries – Modification of the database – Joined Relations – Data-Definition
Language – Embedded SQL –Dynamic SQL – Other SQL Features. Other Relational
Languages: Query-by-Example – Datalog – User Interfaces and Tools

UNIT III

Integrity and Security: Domain Constraints – Referential Integrity – Assertions –

Triggers – Security and Authorization – Authorization in SQL – Encryption and
Authentication. Relational-Database Design: First Normal Form – Pitfalls in Relational-
Database Design – Functional Dependencies – Decomposition – Desirable Properties of
Decomposition – Boyce-Codd Normal Form – Third Normal Form – Fourth Normal
Form – More Normal Forms – Overall Database Design Process.

UNIT IV

Storage and File Structures: Overview of Physical Storage Media – Magnetic Disks –
RAID – Tertiary Storage – Storage Access – File Organization – Organization of Records
in Files – Data-Dictionary Storage. Indexing and Hashing: Basic Concepts – Ordered
Indices – B+-Tree Index Files – B-Tree Index Files – Static Hashing – Dynamic Hashing
– Comparison of Ordered Indexing and Hashing – Index Definition in SQL – Multiple-
Key Access

http://it.pec.edu 57/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UNIT V

Transactions: Transaction concept – Transaction State – Implementation of Atomicity

and Durability – Concurrent Executions – Serializability – Recoverability –
Implementation of Isolation – Transaction Definition in SQL – Testing for Serializability
Concurrence Control: Lock-Based Protocols – Timestamp-Based Protocols – Validation-
Based Protocols – Multiple Granularity – Multiversion Schemens – Deadlock Handling –
Insert and Delete Operations – Weak Levels of Consistency – Concurrency of Index
Structures. Recovery System: Failure Classification – Storage Structure – Recovery and
Atomicity – Log-Based Recovery – Shadow Paging – Recovery with Concurrent
Transactions – Buffer Management – Failure with Loss of Nonvolatile Storage –
Advance Recovery Techniques – Remote Backup Systems

TEXT BOOK

1. Silberschatz, Korth, Sudarshan, “Database System Concepts”, 4th Edition –

McGraw-Hill Higher Education, International Edition 2002. Chapters: 1 to 7, 11,
12, 15 to 17.

REFERENCE BOOKS

1. Fred R McFadden, Jeffery A Hoffer, Mary B. Prescott, “Moden Database

Management:, Fifth Edition, Addison Wesley, 2000.
2. Elmasri, Navathe, “Fundamentals of database Systems”, Third Edition, Addison
Wesley, 2000.
3. Jefrey D.Ulman, Jenifer Widom, “A First Course in Database Systems:, Pearson
Education Asia, 2001.
4. Bipin C Desai, “An Introduction to Database Systems”, Galgotia Publications Pvt
Limited, 2001.

http://it.pec.edu 58/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 6043 / UIT 6083 : SOFTWARE ENGINEERING AND ARCHITECTURE

UNIT I

OVERVIEW OF SOFTWARE ENGINEERING – Introduction – FAQs about

Software Engineering – Professional and Ethical responsibility – Computer–based
system engineering – Emerging system properties – System and their environment –
System modeling – System engineering process – System procurement. SOFTWARE
PROCESSES –- Process models – Process iteration – Software specification – Software
design – Software validation – Software evolution - Automated process support.
PROJECT MANAGEMENT - Management activities – Project planning – Project
scheduling – Risk management.

UNIT II

REQUIREMENTS – Functional and non-functional requirements – User requirements –

System requirements – Software requirements document – Requirements engineering
processes – Feasibility studies – Requirements elicitation and analysis – Requirements
validation Requirements management. SYSTEMS MODELS – Context models –
Behavioral models – Data models – Object Models – CASE workbenches. SOFTWARE
PROTOTYPING – Prototyping in the software process – Rapid prototyping techniques
– User interface prototyping. FORMAL SPECIFICATION – Formal specification in
the software process – Interface specification – Behavioral specification.

UNIT III

ARCHITECTURE AND SOFTWARE DESIGN – System structuring – Repository

model – Client server model – Abstract machine model – Control models – Modular
decomposition – Domain-specific software architecture – Distributed system
architectures – multiprocessor architectures – client server architectures - CORBA.
OBJECT-ORIENTED DESIGN – Objects and object classes – Object oriented design
process – Design evolution. REAL-TIME SOFTWARE DESIGN – System design –
Real-time executives – Monitoring and control systems. DESIGN WITH REUSE –
Component-based development – Application families – Design patterns. USER
INTERFACE DESIGN - User interface design principles – User interaction –
Information presentation – User support - Interface evaluation.

UNIT IV

CRITICAL SYSTEMS AND DEPENDABILITY – Critical systems – Availability and

reliability – Safety – Security. CRITICAL SYSTEMS SPECIFICATION AND
DEVELOPMENT – Software reliability specification – Safety specification – Security
specification – Fault minimization – Fault tolerance – Fault-tolerant architectures – Safe
system design. VERIFICATION AND VALIDATION – Verification and Validation
planning – Automated static analysis – Cleanroom software development. SOFTWARE
TESTING – Defect testing – Integration testing – Object oriented testing – Testing

http://it.pec.edu 59/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
workbenches. CRITICAL SYSTEMS VALIDATION – Formal methods and critical
systems – Reliability validation – safety assurance – Security assessment.

UNIT V
SOFTWARE COST ESTIMATION – Productivity – Estimation techniques –
Algorithmic cost modeling – Project duration and staffing. QUALITY
MANAGEMENT – Quality assurance and standards – Quality planning – Quality
control – Software measurement and metrics. PROCESS IMPROVEMENT – Process
and Product Quality – Process analysis and modeling – Process measurement – The SEI
Process Capability Maturity Model – Process classification.

TEXT BOOK
1. Ian Sommerville, "Software Engineering", Sixth Edition, Pearson Education, 2001.

UCS 6041 / UIT 6084 : COMPUTER NETWORKS

UNIT I
Introduction To Networks And Communication Media: Uses – Network Hardware –
Network Software – Reference Models – Example Networks – Network Standardization.
Basis for data communication - Transmission media – Wireless Transmission –
Telephone Systems – Satellite Communication.

UNIT II
The Data Link Layer : Data Link Layer design issues – Error Detection and Correction
Methods - Elementary Data Link Protocols – Sliding Window Protocols – Protocol
Verification Methods – Channel Allocation – Multiple Access protocols – IEEE 802
Standards – Bluetooth.

UNIT III
The Network Layer: Network Layer design issues – Routing algorithms – Congestion
Control algorithms – Internetworking – Network Layer in Internet.

UNIT IV
The Transport Protocols: Transport Service – Transport Protocols – Internet Transport
Protocols UDP – TCP - Performance issues.

UNIT V
The Application Layer: Application Layer design issues – Domain Name System -
Electronic Mail – World Wide Web – Multimedia - Other Applications – Network
Security - Basic Cryptography - DES - RSA.

TEXT BOOK
1. Andrews S. Tanenbaum, “Computer Networks”, Prentice Hall of India Private
Limited, (4th Edition), 2003.

http://it.pec.edu 60/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
REFERENCE BOOK
1.Leon Garcia and Widjaja, "Communication Networks - Fundamental concepts and key
architecture", Tata McGraw Hill, 2001.

UCS 5048 / UIT 6086 : HARDWARE TROUBLESHOOTING LABORATORY

LIST OF EXPERIMENTS

1. Study of In-Circuit Emulator

2. Study of Logic State/Timing Analyzers
3. Hot and cold test of electronic components
4. PC system integration and Hard disk partitioning
5. Circuit Tracing
6. Adding I/O ports to an existing hardware (kit or PC)
7. Troubleshooting PC Mother board problems
8. Troubleshooting Printer related problems
9. Troubleshooting keyboard related problems
10. Troubleshooting 8085 kit using Logic Analyser
11. Troubleshooting 8085 kit using In-Circuit Emulator
12. PC to PC communication using direct cable connection
13. MODEM programming
14. Troubleshooting Floppy disk drive problems
15. Study and programming of USB port

http://it.pec.edu 61/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 6047 / UIT 6087: DATABASE MANAGEMENT SYSTEMS LABORATORY

Experiments are to be carried out in DB2 / ORACLE AND VB.

1. Study of Database Concepts

RELATIONAL MODEL – TABLE – OPERATIONS ON TABLES –
INDEX – TABLESPACE – CLUSTERS – SYNONYM – VIEW –
SCHEMA – DATA DICTIONARY – PRIVILEGE – ROLE –
TRANSACTIONS

2. Study of SQL
Primitive Data Types – User Defined data Types – Built-in Functions –
Parts of Speech of CREATE, ALTER, DROP, SELECT, INSERT,
DELETE, UPDATE, COMMIT, ROLLBACK, SAVEPOINT, GRANT,
REVOKE

3. Study of Query Types

Queries involving Union, Intersection, Difference, Cartesian Product,
Divide Operations – Sub Queries – Join Queries – Nested Queries –
Correlated Queries – Recursive Queries

4. Study of PL/SQL
Blocks, Exception Handling, Functions, Procedures, Cursors, Triggers,
Packages.

5. Application
Design and develop any two of the following
• Library Information System
• Logistics Management System
• Students’ Information System
• Ticket Reservation System
• Hotel Management System
• Hospital Management System
• Inventory Control
• Retail Shop Management
• Employee Information System
• Payroll System
• Any other Similar System

Clearly mention the scope of the system. Use standard tools for expressing the
design of the systems.

http://it.pec.edu 62/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 6046 / UIT 6088 : COMPUTER NETWORKS LAB

LIST OF EXPERIMENTS

1. Write a socket Program for Echo/Ping/Talk commands.

1. Create a socket (TCP) between two computers and enable file transfer between
them.
2. Write a program to implement Remote Command Execution ( Two M/Cs may be
used )
3. Write a program to implement CRC and Hamming code for error handling.
4. Write a code simulating Sliding Window Protocols.
5. Create a socket for HTTP for web page upload & Download.
6. Write a program for TCP module Implementation.(TCP services)
7. Write a program for File Transfer in client-server architecture using following
methods.
. USING RS232C
. TCP/IP
8. Write a program to implement RMI (Remote Method Invocation)
9. Perform a case study about the different routing algorithms to select the network
path with its optimum and economical during data transfer.
.Shortest path routing
.Flooding
.Link State
.Hierarchical
11. Broadcast /Multicast routing

http://it.pec.edu 63/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 6089 : INDUSTRIAL TRAINING / VISIT (Report)

In the course of study, during 5th and 6th semesters, each student is expected to undertake
a minimum of five industrial visits (leading hardware manufacturing / software
development concerns) or undertake a minimum of eight weeks / 60 days of industry
training(in a reputed concern). Based on the industrial visits / training, the student has to
submit a report at the end of sixth semester highlighting the exposure he/she gained. The
report will be evaluated by the departmental committee for 50 marks. The proof for
having undergone visits / training are to be enclosed along with report as enclosures.

UCC 60810 : GENERAL PROFICIENCY - IV

UNIT 1

RESUMES : Introduction to Resumes; Types of Resumes; Organization of Resume

Formats; Presenting Information and Content

UNIT II

GROUP DISCUSSIONS/ ACTIVITIES : Introduction; Defining Group Discussions;

Types of Group Discussions; Preparation; Participation; Group Dynamics; Intra/Inter
Dept. Group Discussions; Team-work; Negotiation Skills; Introduction to Organizational
Behaviour; Language lab Practice

UNIT III

INTERVIEWS :Introduction; Honing Verbal and Non-verbal Skills; Rehearsing;

Listening Skills; Taking the Interview; Facing Questions; Mock Interviews

UNIT IV

QUANTITATIVE ANALYSIS :Aptitude Tests; Psychometric Tests; Puzzles

REFERENCE BOOKS:

1. Prasad, H.M. How to Prepare for Group Discussion and Interview. Tata
McGraw-Hill, 2001.
2. Kenendy, Gavin. The Perfect Negotiation. Random House Business Books, 1999.
3. Career Press Editors. 101 Great Resumes. Jaico Publishing House, 2003.
4. Robins, Stephen. Organizational Behaviour. Prentice-Hall, 2003
5. Aggarwal, R.S. A Modern Approach to Verbal & Non-verbal Reasoning. S. Chand
& Co., 2004.

http://it.pec.edu 64/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 7043 / UIT 7081 : INTERNET TECHNOLOGY AND WEB DESIGN

UNIT I

Internet principles – Basic Web concepts – Client –Server model – Retriving data from
Internet -Protocols and applications. Web Design process: Web process Model-Goals and
problems-design phase-Testing. Site Types and Architecture-Web site types-Dynamic
Sites-site structures

UNIT II

Search and Design: Worldwide search-web searching overview-working of search

engines-search engine promotion-optimization-Search interface. Web protocols-HTTP-
DNS, Web Servers-components-software, web hosting. Browsers-HTML and Scripting
languages-cookies- Multimedia in web design.

UNIT III

Web Technologies: Anatomy of xml document - xml markup-working with elements and
attributes - creating valid documents-xml objects. ActiveX controls: Introduction-
Building a basic control - OLE and ActiveX- HTML and ActiveX-ActiveX Documents.

UNIT IV

Streaming – Networking Principles – Sockets for Clients - Sockets for Servers – Protocols
handlers – Content handlers – Multicast sockets – Remote method invocation.

UNIT V

Internet Security: The Internet-Understanding Firewalls-Hackers-TCP/IP from a security

view point –sockets and services-Encryption. Firewall Technology-packet filtering-
Network Address Translation-application level proxies-VPN- ideal firewall.

TEXT BOOKS

1.Thomas A.Powell ,“The Complete Reference Web design” TataMcGraw-Hill ,2000.

2.Mathew strebe, charles perkins,”Firewalls”,BPB , 2000.

REFERENCE BOOKS

1.Eillotte Rusty Harold, “Java Network Programming”, O’Reilly Publications, 1997.

2. John paul Mueller,”Active X from the Ground up”, TataMcGraw-Hill,1997.
3.Michael Girdley, Kathryn A. Jones, et al., “Web programming with javaTM”,Sams.net
publishing1996.

http://it.pec.edu 65/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 704E3/ UIT 7082 HIGH SPEED NETWORKS

UNIT I

HIGH SPEED LANS: FAST ETHERNET, SWITCHED FAST ETHERNET –

FDDI, SONET / SDH: FRAME STRUCTURE, ARCHITECTURE LAYERS, PAY
LOADS – FRAME RELAY: PROTOCOLS AND SERVICES, CONGESTION
CONTROL.

UNIT II

ISDN: Overview, Standards, Interfaces and functions, ISDN Layers: Physical, Data link,
Network, - Services – BISDN Architecture and Protocols.

UNIT III

ATM Networks: Protocol Architecture, ATM Layer, Cell Structure, Cell header, ATM
Adaptation Layer, Various types, Segmentation and Reassembly, Convergence sub-layers

UNIT IV

ATM Traffic and Congestion Control: Service categories, Traffic related attributes,
Traffic management framework, Traffic management, ABR traffic management,
Signaling, Protocol signaling, Meta signaling, TCP/IP over ATM.

UNIT V

Optical Networks: Wavelength Division Multiplexing, Optical Networking evolution,

Network Architectures, Enabling Technologies, Various issues in Wavelength Routed
Networks, Optical Circuit switching, IP over ATM over SONET over WDM, IP over
SONET over WDM, IP over WDM – Various Models.

TEXT BOOKS

1. William Stallings, 'ISDN and broadband ISDN with Frame Relay and ATM',
Fourth edition, Pearson Education, 2000.
2. Rainer Handel, Manfred N. Huber, and Stefan Schroder, 'ATM Networks –
Concepts, Protocols, Applications', Second edtion, Addison Wesley, 1994.
3. C.Siva Ram Murthy and G. Mohan, 'WDM optical Networks – Concepts,
Design,and Algorithms', Printice Hall India, 2002.

http://it.pec.edu 66/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 8042/ UIT 7083 : DISTRIBUTED COMPUTING

UNIT I
Introduction - Goals - Hardware Concepts - bus based multiprocessor - switched
multiprocessor - bus based multicomputer - switched multicomputer - Software
Concepts- Network Operating Systems - True Distributed System - Multiprocessor time
sharing system - Design issues. Communication-Layered Protocols - ATM networks.

UNIT II
Client Server model - Remote Procedure Call - Group Communication –
Synchronization: Clock Synchronization – Mutual Exclusion – Election Algorithms –
Atomic Transaction.

UNIT III
Deadlock - Threads - System models - Processor Allocation - Scheduling in Distributed Systems -
Fault Tolerance - Real time distributed systems.

UNIT IV
Distributed file systems - Distributed file system design – implementation – Trends in
Distributed File Systems - Distributed shared memory - consistency models – page based
distributed shared memory - shared variable distributed shared memory – Distributed
programming languages

UNIT V
Case studies: Amoeba : Introduction – Objects and capabilities in Amoeba – Process and
Memory Management in Amoeba – Communication in Amoeba – The Amoeba Services.
DCE :Introduction – Threads – Remote Procedure call – Time, Directory Service and
Security Services – Distributed File System..

TEXT BOOK
Andrew S.Tanenbaum, “Distributed Operating Systems”, Pearson Education Asia, 2001.

REFERENCE BOOKS
1. Mukesh singhal and Niranjan G.Shivaratri, “Advanced concepts in Operating system',
Tata McGraw Hill.
2. Pradeep.k and Sinha, “Distributed operating systems, PHI, Newdelhi, 2001.

http://it.pec.edu 67/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 7047 / UIT 7086 : INTERNET TECHNOLOGY LABORATORY

Implement the following problems :

1. Creation of HTML Files
2. Working with Client Side Scripting
1.0 VBScript
2.0 JavaScript
3. Configuration of web servers
1.0 Apache
2.0 Internet Information Server(IIS)
4. Working with ActiveX Controls in web documents.
5. Experiments in JAVA
1.0 Applets
2.0 Threads
3.0 Sockets
6. Working with Server Side Scripting
1.0 Active Server Pages
6.2 Java Servelets

UCS 8046 / UIT 7087 : DISTRIBUTED COMPUTING LAB

1. Simple exercises to learn the concept of RMI, Servlets, CORBA, COM and
DCOM
2. Finding Simple and Compound interest using RMI
3. RMI-based implantation of Airline Reservation system
4. Servlet-based implantation of Airline Reservation system
5. Implementation of Mail Server
6. Implementation of Quiz Server
7. Implementation of ATM
8. Implementation of Online Shopping System
9. Implementation of matrimonial System.

http://it.pec.edu 68/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 7088 / UIT 8087 : PROJECT WORK PHASE-I AND PHASE-II

The objective of the project is to enable the students to work in convenient groups
of not more than three members in a group on a project of latest topic / research area /
industrial applications. Each project group shall have a guide who is a faculty member.

During the seventh semester, the students are expected to undergo Phase-I of the
project. The project group is required to do literature survey, formulate the problem and
form a methodology of arriving at the solution of the problem. The departmental
committee shall examine the students for 50 marks and the evaluation is based on
continuous internal assessment comprising one seminar (15 marks), demo (15 marks) and
one internal viva-voce (20 marks).

During the eighth semester, the students are expected to complete the project
(Phase - II) and submit a full-fledged report comprising of the complete system
developed along with implementation and test results. The departmental committee shall
examine the students for 50 marks and the evaluation is based on continuous internal
assessment comprising one seminar (25 marks) and demo for complete system developed
(25 marks). At end of the semester, a viva-voce examination will be conducted for 100
marks (50 marks for internal examiner and 50 marks for external examiner).

UCS 7089 : SEMINAR

The objective of the seminar is to encourage the students to work independently and to
get exposure in latest technologies. The topic shall be chosen in consultation with a
faculty member who would be the guide. Each student is expected to make a critical
review of literature and prepare a report. The student is expected to present a seminar.
The departmental committee will evaluate the performance of the students in the seminar
and the report for 50 marks.

http://it.pec.edu 69/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 804E6 / UIT 708E1 : INDUSTRIAL PSYCHOLOGY AND SAFETY
MEASURES

UNIT I

INTRODUCTION : Definition of Industrial Psychology – Methods and scopes of

Industrial Psychology – Individual and situational differences in job performance –
Concept of performance appraisal – Purpose of performance appraisal.

UNIT II
MOTIVATION AND MORALE : Definition of motivation – Motivational theories –
Motivation Hierarely of needs – Employees service programme – Employees morale –
Planning a morale development programme.

UNIT III

RECRUITMENT, SELECTION, PLACEMENT TRAINING AND

DEVELOPMENT : Recruitment policy – Recruitment from within and outside –
Selection – A negative process – Personal qualities for selection – Selection procedure –
Purpose and importance of training and development – Training and education –
Executive development – Evaluation of training and development programme.

UNIT IV

LEADERSHIP AND ORGANIZATIONAL COMMUNICATION : The concept of

leadership – Approaches to the study of leadership – Various styles of leadership –
Organizational communication system – Information theory – Communication rate –
Media of communication.

UNIT V

INDUSTRIAL SAFETY AND WELFARE : Introduction – Losses due to accidents –

Measures of accidents – Cruces, causes and preventive measure for accidents – Injury
distribution – Accident proneness – An effective safety programme – Supervisor’s role in
accident prevention – Health and welfare programme.
REFERENCE BOOKS

1. M.C. Connell. J V, "Psychology", New York Rinehart and Wiation, 1996.

2. Morgan, C.T., King, R.A., Weiss. J.R., and Schopler.J, "Introduction to
Psychology", (VII edn), New York Mc Graw Hill., 1986
3. Aseh, S.E, "Social Psychology", OUP, Oxford, 1987
4. Asit K.Ghosh and Premkumar, "Industrial Psychology Management", Anmol
publications, Darya Ganj Road, New Delhi, 1991
5. Surinder Kumar and Prasantha Padhy, "Personal Management and Industrial
Relations", Sathya Prakashan, New Delhi., 1995.

http://it.pec.edu 70/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 704E8 / UIT 708E2 : BUSINESS ENVIRONMENT AND HUMAN

RESOURCE MANAGEMENT

UNIT I

International Business and its Environment – International Economic Cooperation and

Agreements – International Economic Institutions – International Trade and Investment
Theories

UNIT II

International Trade and payments – International Investments – Multinational

Corporations – Global Competitiveness

UNIT III

International Operations Management – International Monitory System and Foreign

Exchange Market – Globalization

UNIT IV

HRM-The Global and Indian Scenario – HRM for Corporate Excellence – Human
Resource Planning – Human Resource Information System – Recruitment and Selection
Strategies – Socializing, Orienting and Developing Employees – Concept of HRD –
Performance Appraisal Systems – Potential Appraisal and Succession Planning – Career
Planning and Development – Assessment and Development Centers

UNIT V

Motivation at Work – Participative Management – Empowerment – Labour Relations –

Reward System – Quality of Work Life – Compensation Management – Organization
Development. Knowledge Creation and Management – Virtual Organization and
Emerging HR Trend – Learning Organization – Strategic Human Resource Management
– Human Resource in Information Technology Organization – Human Resource in
Mergers and Acquisitions – International Human Resource Management

TEXT BOOKS

1. Francis Cherunilan, “International Business Environment”, Himalaya Publishing

House, 2003
2. Biswajeet Pattanayak, “Human Resource Management”, Prentice-Hall of India
Private Limited, 2003.

http://it.pec.edu 71/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 708E3 : MANAGEMENT CONCEPTS AND STRATEGIES

UNIT I
Management: Science Theory and Practice - Management and Society: Social
responsibility and Ethics. The nature and purpose of planning - objectives - Strategies
Policies and planning premises.

UNIT II
Decision making. The Nature and purpose of organizing - Basic departmentation - Line /
staff Authority and decentralization - Effective Organizing and organizational culture.

UNIT III
Human Resource Management and selection - Performance appraisal and career strategy
- Manager and organizational development.

UNIT IV
Managing and the Human factor - Motivation - Leadership - communication.

UNIT V
The system and Process of controlling control techniques and information Technology -
Productivity and Operations Management - Overall and Preventive Control - Towards a
unified, Global management theory.

TEXT BOOKS:
1. Herald Knootz and Heinz Weihrich, “Essentials of Management”, McGraw-Hill
Publishing Company, Singapore International Edition, 2000.

2. Ties AF, Stoner and R.Edward Freeman “Management” Prentice Hall of India
Pvt., Ltd., New Delhi 110 011, 2003.

3. Joseph l, Massie, “Essentials of Management”, Prentice Hall of India Pvt., Ltd.,

New Delhi 110 011, 2002.

http://it.pec.edu 72/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 708E4 : ORGANIZATIONAL BEHAVIOUR AND INDUSTRIAL

RELATIONS

UNIT I

Introduction to Organizational Behavior – Organizational System and Environment

UNIT II

Perception and Learning – Personality and Individual Differences – Motivation and Job
Performance – Values, Attitudes and Beliefs – Stress Management

UNIT III

Group Dynamics – Leadership – Power and Politics

UNIT IV

Organizational Structure – Organizational Climate and Culture – Organizational Change

and Development

UNIT V

Trends in Organizational Behavior – Case Studies – role-plays – Behavior Simulation

Exercises

TEXT BOOK

1. Stephen P. Robbins, “Organizational Behavior”, Ninth Edition, Prentice-Hall of

India Pvt. Ltd., 2002.

REFERENCE BOOKS

1. Fred Luthans, “Organizational Behavior”, Eighth Edition, McGraw-Hill

International Edition, 1998.

http://it.pec.edu 73/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 708E5 : OPTIMIZATION TECHNIQUES

UNIT I

Overview of Operations Research - Concept of Linear Programming Model - Development of LP

Models - Graphical Method - Linear Programming Methods - Duality

UNIT II

Transportation Problem - Assignment Problem - Network Techniques

UNIT III

Integer Programming - Formulations - Cutting-plane Algorithm - Branch-and-Bound Technique -

Zero-One Implicit Enumeration Technique

UNIT IV

Inventory Control - Queuing Theory - Decision Theory - Game Theory

UNIT V

Dynamic Programming - Applications of Dynamic Programming - Project Management

TEXT BOOK

R. Panneerselvam, "Operations Research", Prentice Hall of India, 2002. Chapters 1 to 12

REFERENCE BOOKS

0. S. Kalavathy, "Operations Research", Vikas Publishing House Pvt

Ltd, 2002
0. S. Dharani Venkatakrishnan, "Operations Research - Principles
And Problems",
Keerthi Publishing House, 1992
0. Kanti Swarup, Manmohan, P.K. Gupta, "Operations Research",
Sultan Chand & Sons,
1991.

http://it.pec.edu 74/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 708E6 : CLIENT SERVER ARCHITECTURE
UNIT I
Client/Server System concepts : Introduction – Concepts – 2-Tier Architecture – 3-Tier
Architecture – N-Tier Architecture – Benefits of Client/Server – Case study of N-Tier
Architecture – Client Server Models – Gartner Classifications – Middleware – Database
connectivity and its need - Upsizing – Down sizing – Right Sizing – Characteristics –
Types of Servers and Clients – Future of client server computing.

UNIT II

Client/Server System Architecture: Client/Server building blocks – Hardware, Software,

Middleware – Types of Middleware – DDE, OLE, MOM, Transaction processing
Monitors, ODBC – Need for database connectivity – Design overview of ODBC –
Architecture – Components – Applications – Driver Managers – Drivers – Data Sources
– ODBC2.5 and ODBC 3.0 – Operating System Services – Base Services – External
Services – Service Scalability.

UNIT III

Client/Server Databases: SQL database Servers – Server Architecture – Multithread

Architecture – Hybrid Architecture – Stored procedures – Tiggers – Rules of client/server
transaction processing – Transaction Models – Chained and Nested transactions –
Transaction Management Standards – Distributed Database characteristics – Introduction
to Data Warehousing and Data Mining.

UNIT IV

Client/Server CORBA-Style: Distributed CORBA Objects – OMG’S Object

Management Architecture – CORBA 2.0 Intergalactic ORB – CORBA Services -
facilities – Business Objects – 3-Tier Client/Server, Object style – Evolution of CORBA-
CORBA Static and Dynamic Method invocation

UNIT V

Remote Method Invocation: RMI Interfaces and Classes – RMI Scenario – The JDBC
Architecture – JDBC Interfaces – JDBC Scenario – Java Bean Component Model –
Overview – Comparison of Middleware Technologies.

TEXT BOOKS :

1. Robert Orafali, Dan Harkey and Jerri Edwards, “Essential Client/Server Survival
Guide”, John Wiley & Sons Inc.,1996
2. Robert Orfali and Dan Harkey, “Client/Server Programming with JAVA and
CORBA,”, John Wiley, Second edition.
3. Dawna Travis Dewire,“ Client/Server Computing”, McGraw-Hill Computer
Science Series.

http://it.pec.edu 75/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 708E7 : TELECOMMUNICATION MANAGEMENT

UNIT I
Principles and evolution of switching system Evolution of telecommunication – simple
telephone communication – network structures – Network services- terminology –
regulation – standards – OSI reference model for open systems – basics of switching
system – manual switching system – rotary dial telephone – signaling tones - strowger
switching components – step – by- step switching design for 100 line, 1000 line, 10000
line exchange – touch tone dial telephone – cross bar switching & exchange organization

UNIT II
Space time and multistage switching: Stored program control- centralized SPC-
Distributed SPC- software architecture – application software – enhanced services- two
stage networks – three stage networks - N stage networks- basic time division space
switching – basic time division time switching – time multiplexed time switching –
combination switching – three stage combination switching – n stage combination
switching

UNIT III
Traffic Engineering: Network traffic load and parameters – grade of service and
blocking probability – modeling switching systems – incoming traffic and service time
charecterization – blocking models and lose estimates – delay systems. Grading :
principle – design of progressive gradings – other forms of gradings – traffic capacity of
gradings – applications of gradings

UNIT IV
Switching hierarchy and signaling : Subscriber loop systems – switching hierarchy and
routing – transmission plans – transmission systems – numbering plan – charging plan.
Signaling : Customer line signaling – audio frequency junction and trunk circuits – FDM
carrier systems – PCM signaling – inter – register signaling – common channel signaling
principles – CCITT signaling system No:6 - CCITT signaling system No: 7 - digital
customer line signaling

UNIT V
Data networks and ISDN Data transmission in PSTN – switching techniques for data
transmission – satellite based data networks – fibre optic networks – data network
standards – protocol stacks – internetworking. ISDN: New services – network 4 protocol
architecture – transmission channels – user network interface – signaling – numbering
and addressing – service characterization –ISDN standards – intelligent networks –
network management for both public and private telecommunication networks
TEXT BOOKS:
1. Flood J..E , “ Telecommunication switching traffic and networks “ , PHI , 1995.
2. T.Viswanathan , “ Telecommunication switching system and networks” , PHI 1994.
REFERENCE BOOK :

1. T. Ronayne ,” digital communication switching”, wheeler publication ,1992.

http://it.pec.edu 76/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT708E8 : FAULT TOLERANT SYSTEMS

UNIT I
Introduction : Fault Prevention -Fault tolerance – anticipated and unanticipated Faults- Test
generation for digital systems- Combinational logic. Network Boolean difference method test
generation for sequential circuits- fault simulation.

UNIT II

Error Model : General coding scheme – Parity checking code- arithmetic code – code for
computer memories –checking errors in logical operation – communication coding.

UNIT III

Fault Tolerance : Coding technique-fault tolerant self checking and fail safe circuits-fault
tolerant in combinatorial and sequential circuits- synchronous and asynchronous fail safe
circuits.

UNIT IV

Architecture : Fault tolerant computers - general purpose commercial systems-fault

tolerant multiprocessor and VLSI based communication architecture.

UNIT V

Fault Tolerant Software : Design-N-version programming recovery block -

acceptance tests-fault trees- validation of fault tolerant systems.

TEXT BOOKS

1. K.K.Pradhan, "Fault Tolerant computing theory and techniques", volume III.

Prentice Hall, 2001
2. Anderson and Lee, "Fault Tolerant principles and practice", PH 1989.

http://it.pec.edu 77/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 804E10 / UIT 708E9 : MOBILE COMMUNICATION NETWORKS

UNIT I

Antennas and Propagation: Antennas, Propagation models, Line-of-sight

communications, Fading in the mobile environment - Signal Encoding Techniques:
Digital data and Analog signals, Analog data and Analog signals, Analog data digital
signals, Modulation techniques - Spread Spectrum: Concept, Frequency hopping, Direct
Sequence, CDMA – Coding and Error Control.

UNIT II

Satellite Communications: Parameters, FDM, TDM, GEO139, LEO 139, MEO 140,
Routing, Localization – Cellular Networks: Principles, First generation Analog, Second
Generation TDMA, Second generation CDMA, Third generation systems.

UNIT III

Telecommunication Systems: GSM, Architecture, Radio Interface, Protocols, Handover,

Security – Cordless systems and WLL: IEEE 802.16, DECT – TETRA - UMTS and
MIT 2000.

UNIT IV

Wireless LAN technology: Over view, Infrared LANs, Spread spectrum LANs, Narrow
band microwave LANs – 802.11 protocol: Architecture, Services, Medium access
control, Physical layer – Bluetooth technology: Overview, Radio Specification, Baseband
Specification, Link Manager Specification, Logical Link Control and Adaptation
Protocol.

UNIT V

Mobile IP: Goals, Assumptions, requirements, IP packet delivery, Agent advertisement

and discovery, registration, Tunnelling and encapsulation, Optimization, Reverse
tunneling, IPv6, Dynamic host configuration protocol – Ad hoc networking: Routing,
destination sequence distance vector, dynamic source routing, hierarchical routing,
Alternative metrics – Mobile TCP: Traditional TCP, Indirect TCP, Snooping TCP, Fast
retransmit, selective retransmission, Transaction oriented TCP – WAP: Architecture,
Protocol description.

TEXT BOOKS

1. W. Stallings, "Wireless Communications and Networks", Prentice Hall, 2002.

2. J. Schiller, "Mobile Communications", Pearson education, 2000.

http://it.pec.edu 78/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 708E10 : NETWORK STANDARDS AND PROTOCOLS

UNIT I

Infrastructure Transmission Media - Bandwidth and reliability considerations -

Broadband access - Transmission media – xDSL, Cable modems, Fiber optics,
Wireless - IEEE 802.1 Standards : IEEE 802.1D - LAN Bridging - Transparent
Bridging - Expedited Traffic Capabilities - Selective Multicasting - IEEE 802.1Q -
Virtual Bridged LANs. Advances in local area networks : Traffic Class Expediting,
Dynamic multicast filtering, Virtual Bridged Local Area Networks.

UNIT II

Network Performance Aspects: Voice traffic- Layered video -Mixing/separating

traffic types. Advances at the network layer : Review of IP unicast and multicast
routing protocols - Resource ReSerVation Protocol (RSVP) and Integrated Services
(IntServ) - Differentiated Services (DiffServ) Model : DiffServ architecture, A
framework for differentiated services, Per hop behavior (PHB), Assured Forwarding
PHB, Expedited Forwarding PHB, Interoperation of IntServ and DiffServ.
Multiprotocol Label Switching (MPLS) : Framework and Architecture of MPLS, QoS
and Traffic Engineering aspects of MPLS.

UNIT III

Internet Protocols : IP, ICMP, ARP, RARP, BOOTP, DHCP - Routing Protocols:
Interior Gateway Protocols: GGP, RIP, OSPF - Exterior Gateway Protocols: EGP,
BGP, Policy Routing - IP Multicast Routing IGMP, DVMRP, CBT, MOSPF, PIM, IP
version 6, Multiprotocol Label Switching(IP Switching, Tag Switching)

UNIT IV

Advances in end-to-end transport protocols : Real-Time Transport Protocol (RTP),

RTP and RTCP, RTP's audio/video profile, RTP's payload formats for voice and
video. Advances in session layer protocols : Internet conferencing architecture and
protocols - Session Description Protocol (SDP) - Session Announcement Protocol
(SAP) - Session Initiation Protocol (SIP) - ITU's recommendations for audio-visual
communication, H.320, H.323 - ITU's recommendation for data conferencing T.120 -
IETF's Real Time Streaming Protocol (RTSP) - IP Telephony.

UNIT V

Voice, video, and data traffic characteristics, Voice Traffic, Voice Encoding Schemes
and Standards, PCM, CELP, Vocoding, Voice Quality and Traffic Characterization.
Video Traffic: Video Compression Schemes and Standards - H.261 (ITU) - MPEG-1

http://it.pec.edu 79/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
and MPEG-2 (ISO) - H.263 (ITU). Video Encoding Control Schemes: Constant Bit
Rate (CBR) - Open-loop Variable Bit Rate (OL-VBR) - Constant-Quality Variable
Bit Rate (CQ-VBR) - Video Quality and Traffic Characterization. Data Applications
Traffic Characteristics: Telnet, SMTP, NNTP, FTP and HTTP traffic - TCP and its
behavior.

REFERENCE BIOOKS

1. Andrew S. Tanenbaum, “Computer networks”, Fourth Edition, Prentice Hall of

India Private Ltd., 2002.
2. W. Richard Stevens, “The Protocols (TCP/IP Illustrated, Volume 1)”, Addison-
Wesley Pub Co; 1st edition, 1993.
3. Michael A. Miller, 'Data and Network Communications', Vikas Publishing
House, 2000.

http://it.pec.edu 80/123
 Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 804E1 / UIT708E11 : VLSI DESIGN

UNIT I

MOS DEVICES AND CIRCUITS: The MOS circuit fundamentals – Depletion and
enhancement mode pull-ups – Transit times of clock period – Effects of Scaling down its
dimensions of MOS circuits and systems. MOS PROCESS: Models of analyse transistor
circuits – The MOS fabrication process – N MOS lambda based layout – rules(6).

UNIT II

DATA AND CONTROL FLOW IN SYSTEMATIC STRUCTURE: Notation – Two phase

locks – Shift registers – Implementation – Dynamic registers – Designing subsystems –
Register to register transfer – Combinational logic – sequential logic finite state machine.

UNIT III

SYSTEM LEVEL DESIGN: Design of an ALU Subsystem – Carry look ahead adders
parallel multipliers – PLA – decoders – encoders – Multiplexers – Buses – Encoding and
Control Operators data path chip.

UNIT IV

DESIGN SYSTEM CONCEPTS: Definitions – Steps in the design of a VLSI Part-Planning

Logic design and simulation – Physical design –Placement and wiring –Development of
routing algorithm – testing Design database –CAD Tools.

UNIT V

APPLICATION OF VLSI TO SOLVE COMPUTATION PROBLEM: Concurrency in

computers- Algorithms for VLSI process array – Matrices vector multiplication –
Convolution algorithm.

TEXT BOOKS

1.Pucknell D.Mshraghim.k, "Basic VLSI Design,Principles and Applications", Pretince

Hall,1985.
2.Carver Meed and Lynn Conway, " Introduction to VLSI Systems", Addison Wesley-1980
chap1-8.

REFERNCE BOOKS

1.Nacolm R.Haskard and Ian,C May, " Analog VLSI Design NMOS and CMOS ",Prentice
Hall,1985.
2.Thomas E.Dillinger, "VLSI Engineering", Prentice Hall,1988.

http://it.pec.edu 81/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 8081 : INTELLIGENT COMPUTING

UNIT I

Introduction : History of AI - Intelligent agents - Nature of environments - structure

of agents and its functions - problem solving agents - search strategies-solving
problems by searching- Breadth-first - Depth-first - Depth-limited- Iterative
deepening- Bidirectional - Informed search methods- A*- AO*- Adversarial search -
Alpha-Beta Pruning.

UNIT II

Knowledge Representation: Knowledge-Based Agent- logic -Propositional Logic -

First-Order Logic (FOL) - quantifiers - Goal-Based Agent – knowledge engineering -
Frame Systems and Semantic Networks - Scripts.

UNIT III

Reasoning: Reasoning patterns in prepositional logic - Inference in First-Order Logic-

Unification - Forward and Backward Chaining - Resolution - Reasoning systems -
Theorem Provers - reasoning with default information - Truth Maintenance sytems.

UNIT IV

Planning : Simple Planning Agent - from Problem Solving To Planning - Basic

Representations For Planning - Practical Planners- Hierarchical Decomposition -
Resource Constraints - Uncertainty - Probabilistic Reasoning Systems.

UNIT V

Learning : General Model Of Learning Agents - Inductive Learning - Computational

Learning Theory Learning In Neural And Belief Networks - Reinforcement Learning -
Types Of Communicating Agents – robotics: Tasks, Parts, Configuration Spaces,
Navigation And Motion Planning.

TEXTBOOK:

1. Stuart J.Russell and Peter Norvig, "Artificial Intelligence: A Modern Approach",

Pearson Education Asia, II edition, 2003.

REFERENCE BOOKS:

1. Elaine Rich and Kevin Knight, “Artificial Intelligence”, Tata Mc Graw Hill
publisher – 2nd edition.
2. Dan W.Patterson, “Introduction to Artificial Intelligence and Expert Systems”,
Prentice hall of India

http://it.pec.edu 82/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 8043 / UIT 8082 : EMBEDDED SYSTEMS

UNIT I
Review of Embedded Hardware: Gates - Timing Diagram- Memory –microprocessors
Buses-Direct Memory Access-Interrupts- Built-ins On the Microprocessor-Conventions
used on Schematic-schematic. Interrupts Microprocessor Architecture-Interrupt Basics-
Shared Data Problem-Interrupt latency

UNIT II
Microchip PIC Micro controller: Introduction, CPU Architecture- Registers- Instruction
sets addressing modes- Loop timing- Timers- Interrupts, Interrupt timing, I/O Expansion,
I 2C Bus Operation Serial EEPROM, Analog to Digital converter, UART-Baud Rate-
Data Handling-Initialization, Special Features – Serial Programming-Parallel Slave Port.

UNIT III
Embedded Microcomputer Systems: Motorola MC68H11 Family Architecture, Registers,
Addressing modes Programs. Interfacing methods parallel I/O interface, Parallel Port
interfaces, Memory Interfacing, High Speed I/O Interfacing, Interrupts-Interrupt service
routine-Features of interrupts-Interrupt vector and Priority, Timing generation and
measurements, Input capture, Output compare, Frequency Measurement, Serial I/O
devices RS 232,RS485.

UNIT IV
Software Development: Round–Robin, Round robin with Interrupts, function-Queue-
Scheduling Architecture, Algorithms. Introduction to - Assembler- Compiler -Cross
Compilers and Integrated Development Environment (IDE). Object Oriented Interfacing,
Recursion, Debugging strategies, Simulators

UNIT V
Real Time Operating Systems: Task and Task States, Tasks and data, Semaphores and
shared Data Operating system Services-Message queues-Timer function-Events-Memory
Management, Interrupt Routines in an RTOS environment, Basic design using RTOS.

TEXT BOOKS
1. David E Simon, “An embedded software primer”, Pearson Education Asia, 2001
2. John B Pitman, “Design with PIC Micro controllers”, Pearson Education Asia, 1998
3. Jonartthan W. Valvano, “Embedded Micro computer Systems, Real time Interfacing”,
Thomson learning 2001.

REFERENCE BOOKS

1. Burns, Alan and Wellings, “Real-Time Systems and Programming Languages”,

Second Edition. Harlow: Addison-Wesley-Longman, 1997
2. Grehan Moore, and Cyliax, “Real time Programming: A guide to 32 Bit Embedded
Development”, Addison-Wesley-Longman, 1998.
Heath Steve, “Embedded Systems Design”, Newnes 1997.

http://it.pec.edu 83/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 8083: INFORMATION CODING TECHNIQUES

UNIT I

Information entropy fundamentals: Information, entropy, properties of information

and entropy, relation between information and probability, mutual and self
information, coding theory, code efficiency and redundancy, Shannon’s theorem,
construction of some basic codes.

UNIT II

Data and Voice Coding: Lossless predictive, Run-length, Ziv-Lempel coding, voice
coding, modulation, linear predictive coding, silence coding and sub-band coding.

UNIT III

Image and video compression: Quantization, JPEG standards, motion compensation,

MPEG-1, MPEG-2, MPEG-4 standards.

UNIT IV

Error Control Coding: Linear Block Codes for Error Correction, Cyclic Codes, Bose-
Choudhuri Hocquenghem codes, Convolution Codes, Trellis Coded Modulation.

UNIT V

Cryptography: Overview of encryption techniques, symmetric cryptography, Data

Encryption Standard (DES), International Data Encryption Algorithm (IDEA), RC
Ciphers, Public-key algorithm, RSA algorithm, Pretty Good Privacy, One-way
Hashing.

TEXT BOOKS
1. Viterbi, “Information theory and coding”, McGraw Hill, 1982. (Unit I to III)
2. Ranjan Bose, “Information theory, coding and cryptography”, Tata McGraw Hill,
2002. (Unit IV and V)

REFERENCE BOOKS
1. John G. Proakis, “Digital Communications”, 2nd Edition, McGraw Hill, 1989.
2. K. Sayood, ”Introduction to Data Compression”, Morgan Kaufmann Publishers,
2000.

http://it.pec.edu 84/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT8086 : ADVANCED SOFTWARE LAB

1. Study of PIC Micro Controller and MC68H11 development kit

2. Interfacing and Programming LEDs and key switcher
3. Real Time Clock
4. Rotary Pulse Generation
5. Frequency Measurement
6. DC motor Speed Control and Measurement
7. Asynchronous Serial Communication
8. PWM Generators
9. LCD display interfacing
10. I2 C interface and Programming
11. System Design using RTOS
12. USB interfacing
13. Implementation of Searching algorithms
. Breadth First Searching
. Depth First Searching
. A*
14. Implementation of game trees
. Single player game
. Two player game
15. Representation of knowledge for simple game using Predicate Logic
16. Implementation of Resolution and Unification algorithms.

UIT 8088: COMPREHENSIVE VIVA VOCE

The students will be tested for their understanding of subjects of study in the curriculum
from 3rd semester to 8th semester. A comprehensive examination, preferably with
objective type questions, will be conducted and evaluated the performance of the students
for 50 marks. A comprehensive viva voce examination will be conducted for 50 marks
with one internal examiner and one external examiner appointed by the University.

http://it.pec.edu 85/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 704E7 /UIT 808E1 : ADVANCED DATABASES
UNIT I

Object Based Databases and XML: Object Oriented Databases – Object Relational
Databases – XML

UNIT II

Database System Architecture: Database System Architecture – Distributed databases –

Parallel Databases

UNIT III

Query Processing – Query Optimization – Application Development and Administration

– Advanced Querying and Information Retrieval (Data Mining and Warehousing) -
Advanced Data Types and New Applications (Multimedia Databases) – Advanced
Transaction Processing

UNIT IV

Case Studies: Oracle – IBM DB2 Universal Database – Microsoft SQL Server

UNIT V
Database Technologies: ODBC, ADO, RDO, DAO, JDBC, JSQL

TEXT BOOK

1. Silberschatz, Korth, Sudarshan, “Database System Concepts”, 4th Edition – McGraw-

Hill Higher Education, International Edition 2002. Chapters: 8 to 10, 18 to 20, 13, 14, 21,
22, 23, 24, 25 to 27.
REFERENCE BOOKS

1. Rajesh Narang, “Object Oriented Interfaces and Databases”, Prentice-Hall of India

Private Limited,2002.
2. Fred R McFadden, Jeffery A Hoffer, Mary B. Prescott, “Moden Database
Management:, Fifth Edition, Addison Wesley, 2000.
3. Elmasri, Navathe, “Fundamentals of database Systems”, Third Edition, Addison
Wesley, 2000.
4. Jefrey D.Ulman, Jenifer Widom, “A First Course in Database Systems:, Pearson
Education Asia, 2001.
5. V.S.Subrahmanian, “Principles of Multimedia Database Systems”, Harcourt India
Private Limited, 1998.
6. C.S.R.Prabhu, “Data Warehousing – Concepts, Techniques, Products and
Applications”, Prentice-Hall of India Private Limited, 2001.
7. C.S.R.Prabu, “Object-Oriented Database Systems”, Prentice-Hall of India Private
Limited, 2002.

http://it.pec.edu 86/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 808E2 : SATELLITE COMMUNICATION SYSTEMS

UNIT I

ORBITAL ASPECTS OF SATELLITE COMMUNICATION : Orbital mechanics – orbital

equation – orbital elements – orbital perturbation tracking and orbital determination – orbital
correction /control

UNIT II

SPACE CRAFT : Space craft sub systems , communications subsystem – space craft
antennas – thermal control – propulsion sub system – generation storage and conditioning of
power systems.

UNIT III

SATELLITE LINK DESIGN: Basic transmission theory – system noise temp – noise figure
and G/T ratio – design of down links – up link design – link budget analysis – design of
satellite links for specified performance.

UNIT IV

MULTIPLE ACCESS TECHNIQUES: Frequency divison multiple access – preassigned

FDM/FM/FDMA – SPADE operation – time divison multiple access – high rate TDMA –
frame operation – CDMA – Comparisons of the various access techniques.

UNIT V

EARTH STATION TECHNOLOGY: Factors influencing the choice and location of an earth
station – equipment for earth stations – antenna systems – overall block diagram –
applications of satellite communication systems.

TEXT BOOKS:

1. T.Prat and C.W .Bostian : “Satellite Communication “,wiky & sons ,2002.
2. B.N.agarwal; “Design of geosynchronous spacecraft, “.Prentice hall ,2003.

REFERENCE BOOKS:

1. D.Roddy ,”Satellite communications “, phi,1999.

2. D.C.Agarwal ,”Satellite communications “, khanna publisher ,1999.
3. K.Feher ,”Digital communications ,satellite/ earth system engineering “,Prentice
hall,engle wood cliffs ,NJ,1983.

http://it.pec.edu 87/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 804E9 / UIT 808E3 : OPTICAL COMMUNICATION NETWORKS

UNIT I

Introduction, First generation and second generation optical networks, Optical Layer, All-
Optical Networks, Transmission Basics, Fibers and Amplifiers.
Wavelength Division Multiplexing (WDM) Network Elements: Optical Line Terminals,
Optical Line Amplifiers, Optical Add/drop Multiplexers. Optical Cross Connects -
Enabling Technologies - WDM Optical Network Architectures: Broadcast and Select
Networks, Wavelength Routed Networks – MAC protocols for Broadcast and select
networks.

UNIT II

Wavelength routing algorithms: Classification, RWA algorithms, Faireness and

Admission control, Distributed Protocols – Wavelength Convertible Networks: Need and
Structure, Routing in Convertible Networks – Rerouting Algorithms: Benefits, Issues,
Lightpath Migration, Rerouting Schemes, AG and MWPG methods.

UNIT III

Virtual Topology Design: Sub-problems, Problem formulation, Design Heuristics,

Regular Topology Design, Graph coloring – Virtual topology reconfiguration: Need,
Reconfiguration due to traffic changes.

UNIT IV

Control and Management: Network Management Functions, Optical Layer Services,

Layers, Fault Management, Configuration Management, Connection Management –
Network Survivability: Basic concepts, Protection in SONET and IP Networks, Optical
Layer Protection Schemes, Multiplexing Techniques, Provisioning.

UNIT V

Optical Internets: Optical Circuit Switching, Burst Switching, Packet Switching, Access
Networks: FTTC, Optical Multicast Routing: Node Architecture, Source based and
Steiner Tree based Multicast tree generation.

TEXT BOOKS:

1. Rajiv Ramaswami and Kumar N. Sivarajan, Optical Networks – A Practical

Perspective, Morgan Kauffmann Publishers, 2002.
2. C. Siva Ram Murthy and G. Mohan, WDM Optical Networks – Concepts, Design,
and Algorithms, Printice Hall India, 2002.

http://it.pec.edu 88/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 808E4: KNOWLEDGE BASED SYSTEMS

UNIT I
Introduction: Definition-Architecture – Difference between conventional and expert
system programs.

UNIT II

Knowledge Representation And Formal Logic: Knowledge components –Levels of

representation – Knowledge representation schemes –formal logic – Knowledge
engineering and inference – Process – Semantic networks- frames – Scripts – Production
systems.

UNIT III

Knowledge Acquisition: Knowledge engineering - Knowledge acquisition techniques –

Concept formalisation – Knowledge representation development – Knowledge
acquisition for core problems-knowledge acquisition prior knowledge.

UNIT IV

Problem Solving Strategies : Exhaustive search – Large search spaces – Planning – Least
commitment – Principle and constraint propagation- Classification and black board
models.

UNIT V

Expert System Tools: Languages for Expert system development – Expert system shells -
Lisp machines – PC-based Expert system tools.

TEXT BOOK:

1. Ralston, D.W., “Principles of Artificial and Expert Systems Development”, McGraw

– Hill Book Company International.

REFERENCE BOOKS :

1. A. Gonzalez and D. Dankel, “The Engineering of Knowledge-Based Systems''

Second Edition , Prentice Hall, 2004.
2. Tiwan , “The Knowledge Management ToolKit : Practical Techniques for
Building a Knowledge Management System”, Pearson Education.
3. John F Sowa, “Knowledge Representation”, Logical, Philosophical and
Computational Foundations.

http://it.pec.edu 89/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 804E5 / UIT 808E5 : NETWORK ADMINISTRATION AND

MANAGEMENT

UNIT I
Network Management goals, organization, and functions- Network monitoring-Network
control-Network management tools-network statistics measurement systems-Network
management systems-Commercial network management systems-System management-
Enterprise management solutions.

UNIT II
SNMPv1 Network management organization and communication function models-
structure of SNMP management information-stanadards-SNMPv2 system architecture-
protocol-protocol specification-SNMPv3 architecture.

UNIT III

Remote network monitoring concepts-Group management-RMON alarms-practical

issues-ARM network management-Telecommunication network management-TMN
conceptual model-architecture-Network management applications.

UNIT IV

Administering windows NT systems- startup-shutdown and server configuration-user

accounts-managing process-risk and file system-backups-Network configuration-Print
services-Security-

UNIT V

Linux Administration- Routing-Network hardware-Domains Name Systems-Sharing

system files-E-mail-Network management and debugging-Security

TEXT BOOKS
1. Evi Nemeth, Garth Snyder, Trent R. Hein, “Linux Administration Handbook”,
Prentice Hall 2002 .
2. Aelean Frisch, “Essential Windows NT system Administration”, O’Reilley &
Associates Inc., first edition,Jan 1998.
3. Mani Subramanian, “Network Management,Principles and Practice”, Addison
Wesley, 2000.

REFERENCE BOOKS
1. William Stallings, “Network Security essentials,Applications and Standards”, Pearson
Education Asia,2001
2. Ulyess Black, “Network management standards”, McGraw Hill 1995.
3.William Stallings, “SNMP, SNMP v2, SNMP v3 and RMON1” ,2 and 3rd Edition,
Pearson Education Asia 1999.

http://it.pec.edu 90/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UIT 808E6 : GIS AND REMOTE SENSING

UNIT I

Introduction : Maps – Definition – Types of Maps – Characteristics of Maps – Map

Projections – GIS – Definition – Components of GIS – Hardware, Software and
Organizational Context – GIS software; Data Input : Data Types – Spatial and Non-
Spatial – Spatial Data – Points, Lines and Polygons – Non-spatial data – Nominal,
Ordinal, Interval and Ratio – Digitizer – Scanner – Editing and Cleaning – Geo-
referencing.

UNIT II

Remote Sensing : Data collection, Data types - EM spectrum, Radiation and Earth - Simulated
and False-color Images - LUTs and Band Correlation these web sites Image enhancement.
Remote sensing of the Earth's surface utilizing the electromagnetic spectrum. Techniques of
photography, Multispectral Scanning, and Microwave Imagery from Airplane, Satellite, and
manned-spacecraft platforms. Image interpretation, practical applications in earth science and use
of remotely sensed data in geographic information systems.

UNIT III

Data Structure and Analysis : Raster and Vector Data Structure – Raster data storage –
Run length, Chain and Block Coding – Vector Data Storage – Topology – Topological
Models – ArcNode Structure – Surface Data – DEM – Gridded DEM and TIN structure-
Applications of DEM

UNIT IV

Data Analysis and Data Quality : Reclassification – Measurement – Buffering –

Overlaying – SQL for Queries – Neighbourhood and zonal operations – Data Quality –
Components of data quality - Sources of errors in GIS – Meta data

UNIT V

Data Output and GIS Applications : Output – Maps, Graphs, Charts, Plots, Reports –
Printers – Plotters – Fields of application – Natural Resource Management, Parcel based,
AM/FM applications examples – Case study: Urban growth studies using GIS

TEXT BOOKS :

1. Peter A. Burrough and Rachael A. McDonnell, 'Principles of Geographical Systems',

Oxford, University Press, 1988.
2. Anji Reddy Star J. and Estes. J., “GIS – An Introduction”, Prentice Hall, USA.
3. Robert Laurini and Derek Thompson, “Fundamentals of Spatial Information Systems”,
Academic Press, 2002

http://it.pec.edu 91/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UCS 704E10 / UIT 808E7 : E-BUSINESS

UNIT I

e-Commerce and e-Business, e-Business trends, e-Business design:– Construction, Self

diagnosis, Reversing the value chain, Choosing a narrow focus. e-Business Architecture:-
Importance of Application Integration, New era of Cross Functional Integrated
Applications, Integrating Application Clusters into an e-Business Architecture, Aligning
the e-Business Design with Application Integration.

UNIT II

Customer Relationship Management:- Need for Customer Relationship Management,

Defining CRM, New CRM Architecture, Supporting Requirements of the Next-
Generation CRM Infrastructure, Organizational Challenges in Implementing CRM, Next-
Generation CRM Trends. Selling-Chain Management:- Definition, Business Forces &
Technology forces driving the need for Selling-Chain Management, Order Acquisition
Process Management, Elements of Selling-Chain Infrastructure.

UNIT III

Enterprise Resource Planning:- Definition, ERP Decision, ERP usage in the Real World,
ERP Implementation, Future of ERP Application. Supply Chain management:-
Definition, Basics of Internet enabled SCM, e-Supply Chain Fusion, e-Supply Chain
Fusion Management Issues, e-Supply Chains in 200X.

UNIT IV

e-Procurement:- Procurement as Top Management Issue, Operating Resource

Procurement, Procurement Business Problem, Next Generation Integrated Procurement
Applications, Elements of Buy-Side e- Procurement Solutions, Buy-Side Applications for
the Procurement Professional, Elements of Sell-Side e-Procurement Solutions.

UNIT V

Developing the e-Business Design:- Knowledge Building, Capability Evaluation, e-

Business Design, e-Business Design in Action: The case of E*TRADE. Translating e-
Business Strategy into Action.

TEXT BOOK
1. Ravi Kalakota and Marcia Robinson, “e-Business: A Roadmap for Success”, Addison-
Wesley, 2000.

REFERENCE BOOKS
1. Amor, “E-Business (R)evolution”, Pearson Education, 2003.
2. Shurtey, “ e-Business with Net Commerce”, Pearson Education, 2003.

http://it.pec.edu 92/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 808E8 : DIGITAL SIGNAL PROCESSING

UNIT I

Discrete time signal analysis and Linear systems: causality,stability-system characteristics-

typical dicrete-time signals-operation on signals-properties of linear time-invariant digital
systems-fourier transform relationship-sampling analog signals and sampling rate conversions.

UNIT II

Z-transform: properties of Z-transform-inverse z-transform-analysis of discrete

time systems-realisation of digital linear systems-network definitions and operations IIR
and FIR Realisation

UNIT III

Digital filter design: Analog filter approximation Butter worth,chebysher and

elliptic filters –frequeny band transformations-digital filter design equations,low
pass,high pass,band pass,band stop,Iir and FIR digtal filter procedures.FIR half band
digital filters –digital networks for linear phase FIR digital filters-introduction to
computer-aided design of FIR and IIR digital filters.

UNIT IV

Dicrete fourier transform(DFT) and Inverse discrete time fourier transform:

Properties-circular convolution DFT frequency response characteristics-weighting
function-fast fourier transform(FFT)-desimation-in-time(DIT) Algorithm – decimation-
in-frequency algorithm-FFT radix-4 DIT implementation fast convolution procedures.

UNIT V

Finite register length effects: Quantization noise introduced by analog to digital

conversion-finite register length effects in realization of IIR and FIR digital filters and in
DFT computation.Introduction to signal processing system: signal processor application
considerations-signal processing system design methodology.

TEXT BOOKS:

1. Sanjit K.Mitra ,”Digital Signal Processing – A Computer Based Approach”, 2nd

Edition,Tata McGrawHill 2001.

REFERENCE BOOKS:

1. A.V Oppenheim and R.W.schaffer , “Digital and Processing",Prentice Hall.

2. Rabimer.L.R. and C.B.gold. " Theory and applications of Digital Signal Processing",
Prentice Hall Of India.

http://it.pec.edu 93/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 808E9 : WEB ADVERTISING AND MARKETING

UNIT I

Introduction: Internet Principles – Basic Web Concepts – Client/Server model –

Retrieving data from Internet – HTML and Scripting Languages – Standard Generalized
Mark-up Language –Next Generation Internet – Protocols and applications. Introduction
to How Web Advertising Works, Banner Ads – Sidebar Ads – Varied Shapes and Sizes –
PopUp and PopUnder – Floating Ads.

UNIT II
Enterprise Application development environment : Web servers – Server Administration
– IDL – Database Connectivity – Web Application architecture – Distributed Web
Applications – Remote method Invocation – Web Customization – Mark Up Languages.

UNIT III
E-Business Applications: E-Business Frame Work – E-Business Cycle – E-Commerce
Strategies – E-Business Architectures – Stored Procedures – SQL Procedures –
Electronic Payment Services - Shopping Functions.

UNIT IV

Business and the Marketing Concept : How to Make a Web Page - Elements of Good Web Site
Design - Starting a Business Online - Server Services - Domain Names -Web Oriented Industries.
Online Marketing – Email Marketing – Search Engine Marketing – Banner Ad Placement – Link
Exchange.

UNIT V

Real Time Applications: Role of scripting languages – Shopping Cart – Home Banking
Applications – Design and Implementation – Fire Wall – Business models – Tools usage.

REFERENCE BOOKS
1. Ed Roman, “Mastering EJB and the Java 2 Platform Enterprise edition”, John
Wiley and Sons.
2. Stepehen Aubury, Scott R.Weiner, “Developing Java Enterprise Applications”,
Wiley Computer publishing, 2001.
3. “Professional Java Server Programming”, Wrox Press Ltd.
4. Daniel J. Berg, J. Steven Fritzinger, “Advanced Java Techniques for Java
Developers”, John Wiley and Sons, Revised Edition.
5. Rickard Oberg, “Mastering RMI: Developing Enterprise Applications in Java and
EJB”, John Wiley and Sons, Book and CDROM edition 2001.
6. Harold, Elliote Rusty Harold, “XML Bible”, 2nd Edition Hungry Minds, Inc.

http://it.pec.edu 94/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
7. Paul Wilton, “Beginning Java Script”, Wrox Press, Inc., Revised Edition.
8. Alex Homer, “Professional ASP 3.0”, Wrox Press, Inc.
9. “Professional Java Server Programming”, Wrox Press Ltd.

http://it.pec.edu 95/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UCS 804E8 / UIT 808E10 : •NET FRAMEWORK AND APPLICATIONS

UNIT I
Introduction:The Microsoft .NET Initiative - The Microsoft .NET Framework - First
.NET Framework Application - Types and Exceptions: .NET Framework Data Types -
Dynamic Linking - Exception Handling - The .NET Framework Class Library -The
.NET Framework Class Library: File and Stream I/O - Collections - Regular
Expressions - Internet Classes - Data Access - Reflection - Windows Forms: The
Windows Forms Programming Model - Controls - Dialog Boxes - Windows Forms and
Visual Studio .NET .

UNIT II
Web Forms: Web Application Primer - The Web Forms Programming Model - Code-
Behind Programming - Web Forms and Visual Studio .NET - Web Controls: Simple
Controls - Button Controls - List Controls - Data-Bound Controls - Validation Controls -
Odds, Ends, and the WebControl Base Class -User Controls: User Control Fundamentals
- The XmlNavBar Control - Dynamic Loading (and Cookies) - Fragment Caching -
Custom Controls: Custom Control Basics - Postbacks and Postback Data - Composite
Controls - Server Controls and Client-Side Scripting - Graphical Controls.

UNIT III
Web Applications: Structure of an ASP.NET Application - The Web.config File - The
Global.asax File - Application State - The Application Cache - Session State - ASP.NET
Security: Understanding Web Security - Windows Authentication - Forms
Authentication - Web Services: Web Services - Web Service Clients - The CityView
Application .

UNIT IV
ADO.NET: A Tale of Two Providers - Connections, Commands, and DataReaders -
DataSets and DataAdapters – XML: XML Primer - Reading and Writing XML -. XPath -
XSL Transformations (XSLT).

UNIT V
Multithreading: Threads - Thread Synchronization - Thread Pooling – Remoting:
Remoting Basics - Advanced Remoting.

TEXT BOOK
1. Jeff Prosise (Wintellect), “Programming Microsoft® .NET”, Microsoft Press,
2002.

REFERENCE BOOKS
1. Jeffrey Richter (Wintellect), “Applied Microsoft® .NET Framework
Programming”, Microsoft Press, 2002.
2. Alexei Fedorov, “Programmer’s Guide to .NET”, Addison Wesley, 2002.
3. Nell Dale, Michael McMillan, Chip Weems and Mark Headington, 'Programming
and Problem Solving with Visual Basic.Net', Narosa Publications, 2004

http://it.pec.edu 96/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIT 808E11 : SOFTWARE QUALITY MANAGEMENT

UNIT I
INTRODUCTION : Software Process assessment overview - Quality management -
Quality assurance plan - Considerations - Verification and Validation - Concepts of
Quality Control, Quality Assurance, Quality Management - Total Quality Management;
Cost of Quality; QC tools - 7 QC Tools and Modern Tools; Other related topics -
Business Process Re-engineering - Zero Defect, Six Sigma, Quality Function
Deployment, Benchmarking, Statistical process control.

UNIT II

CONFIGURATION MANAGEMENT : The need for configuration Management -

Software product nomenclature - Basic configuration management functions - Baselines -
Responsibilities - Need for automated tools - Configuration management plan - SCM
support functions - The requirement phase Design control - The implementation phase -
Test phase - SCM for Tools - Configuration accounting and audit.

UNIT III

SOFTWARE STANDARDS AND INSPECTION : Definitions - The Reason for

software standards - Benefits of standards - Establishing standards - Guidelines - Types
of reviews - Inspection of objectives - Basic inspection principles - The conduct of
inspection - Inspection training Models for Quality Assurance-ISO-9000 - Series, CMM,
SPICE, Malcolm Baldrige Award – quality management models.

UNIT IV

TESTING AND MANAGING SOFTWARE QUALITY : Testing principles - Types

of tests - Test planning - Test development - Test execution and reporting - Test tools and
methods - Real Time testing - quality management paradigm - Quality motivation -
Measurement criteria - Establishing a software quality program - Estimating software
quality.

UNIT V

DEFECT PREVENTION : Principles of software defect prevention - Process changes

for defect prevention - Defect prevention considerations - Managements role -
Framework for software process change - Managing resistance to software process
change - Case studies

TEXT BOOKS
1. Watts S. Humphrey, "Introduction to the Team Software Process", Addison Wesley,
2000.
2. Watts S. Humphrey, "Introduction to the Personal Software Process", Addison

http://it.pec.edu 97/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
Wesley,2000.
3. Watts S. Humphrey, "Managing the Software Process", Addison-Wesley, 1999
4.Stephen H.Kan , “Metrics and models in software quality engineering”, 2nd Edition,
Addison - Wesley, 2003.

http://it.pec.edu 98/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
LIST OF INTERDEPARTMENTAL ELECTIVES
( UID 5005 & UID 6005 )

UID : 011 - EXPERIMENT STRESS ANALYSIS

(Offered by Civil Engineering)

Unit –I

Experimental stress analysis – its scope and importance characteristics of ideal strain
gauge – Mechanical- optical – acoustical – inductance – capacitance strain gauges.

UNIT –II

Electrical resistance strain gauges – gauge characteristic and types – selection of gauges –
gauge factor – gauge materials – transverse sensitivity - rosettes – analysis of stress and
strain using rosettes – circuiting – equipment for recording static and dynamic strains -
load , pressure and displacement transducers.

UNIT –III

Model analysis – direct and indirect models – law of structural similitude – choice of
scales – model materials – limitations of model studies – Buckingham Pi theorem -
design of direct and indirect models – begg’s deformeter and its application

UNIT –IV

Two dimensional photo- elasticity - optical principles stress optical law – methods of
producing isoclinics and isochromatics – methods measuring fractional fringe orders
model materials – methods for separating principle stresses.

UNIT –V

Photo elastic coatings

Moire fringe and brittle lacquer techniques
Introduction to stress freezing techniques

Test Books
1. V.M. Vazirani, S.P Chandola, “Experimental stress Analysis”,Khanna
publishers,1988
2. L.S Srinath “Experimental stress Analysis” Tata McGrand Hill, New Delhi , 1984
3. Experimental stress Analysis, Dr. Sadhu Singh, Khanna Publishers ,1982
Reference
James W Dalley and William F Riley “ Experimental Stress Analysis” Tata McGrand
Hill, 1965.

http://it.pec.edu 99/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 012 - COMPUTER AIDED PLANNING AND DRAFTING
(Offered by Civil Engineering)

UNIT –I

Introduction - Creating New drawing – Opening existing drawings – working with tool bars –
using short cut menus – pointing devices- setting drawing units- modifying AutoCAD
environment – viewing and updating drawing properties – modifying tool bars

UNIT –II

Using commands and systems variables – creating objects – Hatching drawing with
previsions – controlling the drawing display – Editing method - using layers and object
properties – auditing text to drawing – creating dimensions .

UNIT –III

Using blocks and external reference – management content with auto cad design centre –
creating a layout to plot – plotting drawings batch plotting – using scripts files – working
three – dimensional space – interactive veering in 3D – creating three – dimensional
object

UNIT –IV

Rendering and imaging – using 3D images- drawing 3D models creating hidden –line
images – using render with related applications. Working with raster image –managing
raster images- accessing raster image using internet- modifying images and image
boundaries

UNIT –V

Creating compound documents with OLD – linking and embedding information –using
information from other application in AutoCAD. Accessory external database-working
with table data- creating labels – accessing the internet visual Lisp and auto Lisp – VBA
and active X automation

Text Books

1. Introduction to AutoCAD 2002 by J.T Roberts

2. Introduction to AutoCAD 2002 by George Omura
3. Introduction to AutoCAD 2002 by A. Yarwood

Reference

1. 3D Modelling in AutoCad by John EL Wilson Arnie Willians - 2002

http://it.pec.edu 100/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 021 – MECHATRONICS
(Offered by Mechanical Engineering)

Unit – I : Introduction

Introduction to Mechatronics – Mechatronics in Products – Mechatronics in Engineering Design –

Measurement Systems – Electronics for Mechanical – Mechanical System for Electronics. System
Response – Dynamic Characteristics of Systems – zero order - First order – Second order –
System Modeling and analogies.
(9 hours)

Unit – II : Amplifying and Digital Circuits

Amplifier – Operational amplifier – Instrumentation amplifier – comparator. Digital

Representations – Boolean algebra – Design of logic Network – Flip flops – Application of flip
flops – Special purpose Digital integrated circuits.
(9 hours)

Unit – III : Microprocessor and Data Acquisition

Microprocessors and micro Computers – Micro Controllers – Numeric key board – LCD Display –
Method to Design a Micro controller based system. Data acquisition – quantizing theory – Analog
to Digital conversion – Digital to Analog conversion.
(9 hours)

Unit – IV : Sensors and PLC

Performance Terminology – Semi conductor Sensors and micro electro mechanical Devices -
Actuators – Hydraulics Actuators – pneumatic Actuators.
Programmable Logic Controllers (PLC) – basic structure – input / output processing –
programming – Mnemonics Timers – relays and counters – data handling – selection of PLC.
(9 hours)

Unit – V : Control Architecture and Mechatronic Systems

Control architecture – Analog – Digital – Micro Controller – Single Board Computer – personal
Computer designing. Case studies of Mechatronic system. Introduction to design of Mechatronic
systems - Coin counter - Robotics - Magnetic Bearings etc..
(9 hours)

Text Books :

1. David G.Alciatore and - Introduction of Mechatronics and Measurement Systems,

McGraw Mecheal.B.Histand Hill InternationalEditio, 1999.
2. HMT - Mechatronics, Tata McGraw Hill Publishing Company
Ltd., 1998.
3. Lawrence J.Kamm - Understanding Electro – Mechanical Engineering, An
Introduction to Mechatronics”, Prentice Hall, 2000.

http://it.pec.edu 101/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UID 022 - TOTAL QUALITY MANAGEMENT

(Offered by Mechanical Engineering)

Unit – I

Introduction to TWM – Strategies concepts and objectives – Total quality model – TQM as
applied to Indian Industries – Quality circle concepts – concepts, objectives and functions of
quality circles – Benefits of the organization – Training of quality Circle members –
Implementation. (9 hours)

Unit – II

Tools and Techniques – The seven management tools =- Technique for analyzing a quality
process – Statistical process Control – Introduction to S-S concepts
(9 hours)

Unit – III

Cost of quality – Taquchi’s quality loss function – House keeping concepts for industries, tool
room, production shop – processing industries.
(9 hours)

Unit – IV

Quality based product and process Design – Design for reliability – Design for maintainability –
Quality Function Deployment (QFD) – QFD and Quality Assurance – QFD Principles, Concepts and
applications – case studies.
(9 hours)

Unit – V

KAIZEN Concepts – Kaizen by TQC – POKA YOKE ISO 9000 certification system – 9001 to 9004
systems – procedures, audits and reviews – case studies.
(9 hours)

TEXT / REFERENCE BOOKS

1. S.M.Sundara Raja : Total Quality Management Tata Mc Graw Hill, 1998.

2. Patrick.J.Sweeney(editor) : TQM for Engineering, Quality Resources, Newyork, 1993.
3. John Bank : The Essence of Total Quality Management, Prentice Hall
of India,
1998.
4. James I Bossert, : Quality Function Deployment, ASQC quality press,
Wisconsin, 1994.

http://it.pec.edu 102/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 031 - COMMUNICATION ENGINEERING
(Offered by Electronics & Communication Engineering)

UNIT – I
Modulation – Need for modulation – Amplitude modulation – frequency spectrum –
Power relation – different types of modulators – SSB and VSB generation. AM
transmitters – Block diagram – functions of each block – high level transmitters.

UNIT – II
Angle modulation – principle of Frequency and Phase modulation – Relation between
FM and PM waves – Bandwidth of FM – Narrow band wide band FM – Generation of
FM wave – Direct and Indirect methods – FM transmitters – Block diagram – functions
of each block.
UNIT – III
Detection and Receivers – Detection – Diode detectors – Synchronous detection – FM
detectors – slope detectors – Phase discriminators – Ratio detectors.

Receiver – different types – super-heterodyne receivers – Block diagram – Choice of IF

and Oscillator frequencies – Tracking – alignment – AVC, AFC – Receiver
characteristics.

UNIT – IV
Pulse modulation systems – Sampling theorem – Pulse amplitude modulation – Channel
bandwidth for PAM – detection of PAM signals –Pulse time modulation – generation of
PDM and PPM – conversion of PDM and PPM – conversion of PDM to PPM – detection
of PTM signals – Pulse code modulation – quantization – PCM systems – Encoder –
decoder – Time division multiplexing – Frequency division multiplexing.

UNIT – V
Broadband communication system (Block Diagram Approach) – Telegraph system – Tele
printer and Facsimile system – Telephone system – crossbar and electronic exchanges –
Television system – microwave communication and optical communication systems –
Principle of satellite communication – computer communication – Electronic Mail.

Text Books:
1. G. Kennedy, “Electronic Communication Systems”, McGraw Hill, 1984.
2. Wayne Tomasi, “Electronic Communications Systems – Fundamentals Through
advanced”, 4th Edition, Pearson Education, 2001.
References:
1. Taub and Schilling, “Principles of Communication Systems”, McGraw Hill, 1989.
2. Bruce Carlson, “Communication Systems”, McGraw Hill, 1985.

http://it.pec.edu 103/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UID 032 - COMPUTER NETWORKS

(Offered by Electronics & Communication Engineering)

UNIT I
Data Communication Concepts: Transmission media – Data encoding – Interface and
modems – Multiplexing – Error detection and correction – Digital subscriber line –
Circuit switching – Packet switching – Message switching.

UNIT II
Wide Area Networks: ISO-OSI layered architecture – Function of the layers – Data link
protocols – HDLC, LAPB, LAPD, Inter networking devices – Repeaters, bridges, routers,
routing algorithms – Distance vector routing, link state routing, X.25 protocol, congestion
control.

UNIT III
Frame Relay and ATM Networks: Frame relay operation – Layers and traffic control;
ATM networks – Architecture switching, Layers service classes.

UNIT IV
Local Area Networks: LAN topology – Ethernet – Token bus – Token ring – FDDI –
Wireless LAN, ATM LAN – IEEE 802 Medium access control layer standard – Random
access protocols – ALOHA – Slotted ALOHA.

UNIT V
OSI Layers: Transport layer issues – Session layer – Synchronization – Presentation
layer – Encryption, decryption, Application layer – Message handling system, file
transfer, virtual terminal – E-mail.

Text Book:

Achyut S. Godbole, Atul Kahate, “Computer Communication Networks”, Tata

McGraw Hill, New Delhi, 2004.

References:

1. Andrew. S. Tanenbaum, “Computer Networks”, PHI, 1956.

2. W. Stallings, “Data and Computer Communication”, Second Edition, New York,
Mc Millan, 1988.

http://it.pec.edu 104/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 041 - RELATIONAL DATABASE MANAGEMENT SYSTEMS
(Offered by Computer Science & Engineering)

UNIT I

Introduction to Database Systems-applications-Comparison with file systems-Data

models-View of data-database languages-database users and administrators -Transaction
management system structure-application architecture-constraints-keys-Design issues.

UNIT II

Entity_Relationship Diagrams-Relational model-structure of relational database: basic

structure-Schema-Fundamentals of Normalization-1NF, 2NF, 3NF-Introduction to Query
languages.

UNIT III

Introduction to Oracle-Introduction to PL/SQL: Why PLSQL-Features of PL/SQL-

PL/SQL Block-lexical units-variable declaration-PL/SQL types-PL/SQL Control
Structures-PL/SQL records and tables-SQL statement-DML-pseudo columns –grant and
revoke privileges -transaction control. Built in SQL functions: character functions,
numeric-date-conversions-group and other functions.

UNIT IV

Cursors: Introduction-fetch loops-variables-subprograms : creating procedures and

functions, subprogram locations and dependencies-privileges-packages-Triggers-error
handling.

UNIT V

Introduction to Microsoft SQL Server-MY SQL-MS ACCESS. Case Studies: Material

Management-Library Information System.
TEXT BOOKS
1. ”Database System Concepts” – Silberschatz And Korth, McGraw Hill-Fourth
Edition,2002.
2. “Oracle 8: PL/SQL Programming” – Scott Urman, Oracle Press, Tata McGraw
Hill, 1999.

http://it.pec.edu 105/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 042 - VISUAL PROGRAMMING
(Offered by Computer Science & Engineering)
UNIT I

INTRODUCTION: Operating System fundamentals: DOS-WINDOWS. Features of

Object Oriented Programming: Abstraction-Encapsulation-Inheritance-Classes-Derived
classes-Virtual functions-Streams.

UNIT II

VB INTRODUCTION: Datatypes and Variables-Keywords-Statements-Controls and

forms: types-properties-events-methods. Built-in: functions-procedures. User-defined:
functions-procedures-properties.

UNIT III

DATA OBJECTS: Open Data Base Connectivity (ODBC)-Active Data Objects (ADO)-
Data Access Objects (DAO)- Active X Data Objects and Data Connection (ADODC)-
Data environment-Data report-ADODC based controls.

UNIT IV

APPLICATION DEVELOPMENT AND AUTOMATION: MDI-Menu-Toolbar-

Active X-Mouse events- OLE based Automation-Class-Modules-DLL.

UNIT V

VC++ INTRODUCTION: Windows console application-AppWizard-MFC

introduction-Windows MFC application.

TEXT BOOKS:

1.Gary Cornell, ‘Visual Basic 6.0’, Tata McGraw Hill, 1998.

2.C.H. Pappas, W.H. Murray, III ‘Visual C++: The Complete Reference’, Tata McGraw
Hill, 1999.

http://it.pec.edu 106/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 051 - INTRODUCTION TO SOFT COMPUTING
(Offered by Electrical & Electronics Engineering)

UNIT-I

Fuzzy systems: Crisp sets – Fuzzy sets – Operation and properties. Fuzzy relations – Equivalence
and tolerance relations. Fuzzy membership function- types and definitions. Membership value
assignments – Rule based systems. Type of fuzzy inference. Structure and parameters of a Fuzzy
system- computer assignment.

UNIT-II

Neural Networks: Biological inspiration – Neuron model and Network architectures perception –
architecture, learning rule. Limitations of multiplayer perception- Back propagation algorithm –
learning rule – computer assignments.

UNIT-III

Genetic Algorithm: Goals of optimization – Introduction to GA – terminologies. Simple GA-

Data structure. Genetic operation – crossover, mutation, fitness scaling, Inversion- A Multi
parameter mapped fixed point coding – computer assignments.

UNIT-IV

Evolutionary programming: Single and multi objective optimization-general algorithm-Binary

GA, Real parameter GA, constraint handling in GA Evolution strategies general programming –
computer assignments.

UNIT-V

Applications to various branches of Engineering and science- Application of fuzzy, neural, GA

and EP in computer science, electrical, communication, instrumentation and control, mechanical
and civil engineering.

TEXT BOOKS

1. Timothy J. Ross ‘Fuzzy logic with Engineer application’ McGraw Hill.

2. Martin T. Hagam Howard B.Deruth, Mark Beale ‘Neural Network Design’ Thompson
Learning 1996
3. David E. Gold Berg ‘Genetic Algorithm’ Pearson Education 2002.
Multi objective optimization using Evolutionary Algorithm – by Kalyanmoy Deb.
John Wiley and sons 2002

http://it.pec.edu 107/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 052 - INDUSTRIAL ELECTRONICS
(Offered by Electrical & Electronics Engineering)

UNIT – I: THYRISTERS

SCR – SCR behaviour and rating – phase control of SCR – turn-off of SCR – SCR with resistive
load and inductive load – rectifiers with back emf load – TRIAC – TRIAC circuits – phase
control of SCR

UNIT – II: REGULATORS OF VOLTAGE AND MOTOR SPEED

Voltage compensator – solid state DC voltage regulation – DC shunt motor – armature control
and field control of motor speed – electronic control of DC motor – speed regulator action – full
wave motor speed regulation by one SCR

UNIT – III: INDUSTRIAL HEATING

Induction heating – principles- theory – merits – applications – high frequency power source for
induction heating
Dielectric heating – theory – electrodes used in dielectric heating – method of coupling of
electrodes to RF generator – thermal losses in dielectric heating

UNIT – IV: INDUSTRIAL TIMING CIRCUITS

Constituents of industrial timing circuits – timers – classification of timers – thermal timers –

electromechanical timers – electronic timers – classification of electronic timers – digital timing
element – digital counters – SCR delay timer – IC electronic timer

UNIT – V: PROGRAMMABLE LOGIC CONTROLLERS

Number system and codes – basics of PLC programming – timer and counter instructions – data
manipulation instructions – shaft register and sequence instructions

TEXT BOOKS

1. Frank D. Petruzella, Industrial Electronics, McGraw Hill International Editions, 1996

2. G.K. Mithal, Ravi Mithal, Industrial Electronics, Khanna Publishers, Delhi, 1995
3. George M. Chute, Robert D Chute, Electronics in Industry, McGraw Hill
International Editions

http://it.pec.edu 108/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 061 - ELEMENTS OF BIOTECHNOLOGY
(Offered by Chemical Engineering)

UNIT-I

What is Biotechnology, Biotechnology -an interdisciplinary pursuit, public perception of

Biotechnology, Biotechnology and the developing world? Classification of micro-organisms, The
cell, its organelles and their respective functions, Basic metabolism of cells, DNA – Structure and
function, RNA-Structure and function.

UNIT-II

Enzyme Technology: Proteins, Protein Structure & Function, Protein –Protein interactions, The
nature of enzymes, application of enzymes, Technology of enzyme production, immobilized
enzymes.

UNIT-III

Biotechnology and Medicine: Introduction, Pharmaceuticals and bio-pharmaceuticals,

Antibiotics, vaccines and monoclonal antibodies, gene therapy. Biotechnology and Environment:
Introduction, Microbial ecology / environmental biotechnology, waste water and sewage
treatment, landfill technologies, composting, bioremediation, microbes and the geological
environment, sustainability.

UNIT – IV

Genetics And Biotechnology: Introduction, industrial genetics, protoplast and cell fusion
technologies, genetic engineering, Introduction to Bio-informatics, potential lab biohazards of
genetic engineering, Bioethics.

UNIT V

Biotechnology in Agricultural, food and Beverage industries: Introduction, plant biotechnology,

diagnostics in agriculture, food and beverage fermentation, speciality fermentation products e.g.:
biopolymers, bio-pesticides, miscellaneous microbial derived food products.

Text Books/ Reference Books:

1. Shuler, M.L. and F. Kargi. 1992. Bioprocess Engineering, Prentice-Hall, Englewood

Cliffs, NJ.
2. Bailey, J.E. and D.F. Ollis. 1986. Biochemical Engineering Fundamentals, 2nd Ed.
McGraw-Hill, New York.
3. Biotechnology by Smith, Cambridge Press.
4. Modern Concepts of Biotechnology by H.D. Kumar, Vikas Publishing House Pvt. Ltd.
5. Elements of Biotechnology by P.K. Gupta, Rastogi Publications.

http://it.pec.edu 109/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 062 - INDUSTRIAL POLLUTION ABATEMENT
(Offered by Chemical Enginering)

UNIT I

Man and environment, types of pollution, pollution controls aspects, industrial pollution,
pollution monitoring and analysis of pollutants, Indian pollution regulations.

UNIT II

Water pollution- source of water pollution- measurement of quality- BOD- COD- colour and
odor-PH- heavy metals-treatments etc (qualitatively). Industrial waste water treatment
(qualitatively) and recycle.

UNIT III

Solid wastes- quantities and characterizations – industrial –hazardous waste- radio active waste-
simple treatments and disposal techniques (qualitatively treatment).

UNIT IV

Air pollution-types and sources of gaseous pollutants-particulate matter-hazardous air pollutants-

global and atmospheric climatic change (Green house effect)-acid rain. Industrial exhaust –
characterization and Methods of decreasing the pollutants content in exhaust gasses
(qualitatively)

UNIT V

Noise pollution –sound level-measuring transient noise-acoustic environment-health effects of

noise –noise control.

Text books / Reference books:

1.’Enivironmental pollution and control’ J.Jeffrey peirce etl, Butterworth-Heinemann;

4th edition , 1997.
2.‘Pollution control in Process Industries’, S.P.Mahajan, Tata Mc.Graw Hill, 1990.
3.‘Environmental Pollution Control Engineering’, C.S.Rao, New Age International Ltd,, 1992.
4.‘Industrial Air Pollution Engineering’, V.Cavaseno, Mc.Graw Hill, 1980.
5.‘Pollution Control Theory’, Martin Crawford, Mc.Graw Hill, 1976.
6.‘Solid Wastes’, Martell, John Wiley, 1975.

http://it.pec.edu 110/123
 Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 071 - INDUSTRIAL CONTROL SYSTEMS
(Offered by Electronics & Instrumentation Engineering)

UNIT – I
INTRODUCTION: Need for control – block diagram representation of a Control System-
mathematical modelling-transfer function and state space modelling-examples in mechanical,
electrical ,level, pressure and thermal processes –time response analysis of first order and
second order processes- stability-self-regulation – servo and regulator operation.

UNIT – II
CONTROL ACTIONS AND CONTROLLERS: Basic control actions characteristics of on-
off, proportional, integral and derivative control modes – P+I, P+D and P+I+D control modes –
Tuning of controllers-Finite control elements-valves and actuators-characteristics of control
valves – inherent and installed characteristics.

UNIT-III
COMPUTER CONTROL: Basic building blocks of computer control system – SCADA –
Direct Digital Control – AI and expert control systems – Case studies on computer control for
Industrial process.

UNIT-IV
PROGRAMMABLE LOGIC CONTROLLERS: Evolution of PLC’s – Sequential and
programmable controllers – Programming of PLC – Relay logic – Ladder logic – Functional
blocks connecting PLC to computer – Case study of bottle filling system.

UNIT-V
DISTRIBUTED CONTROL SYSTEMS: Evolution – Different architecture – local control
unit – Operator interface – Displays – Engineering interface-DCS applications.

References:

1. Stephanoupoulis, G., Chemical Process Control, Prentice Hall of India, New Delhi, 1990.
2. Michal P.Lucas, Distributed control systems, Van nostrand Reinhold Co.,1986.
3. Petrezeulla, Programmable Controllers, McGraw Hill, 1989.

http://it.pec.edu 111/123
 Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 072 - TRANSDUCERS AND INSTRUMENTATION
(Offered by Electronics & Instrumentation Engineering)

UNIT – I
Generalised scheme of measurement-Statistical analysis of measurement data- Mean,
Standard deviation-Probability of errors-Gaussian Distribution- Probable error and limiting error
Static characteristics of instruments – Accuracy, Precision, Sensitivity, Linearity, Resolution.
Hysteresis, Threshold, Input impedance, Loading effects- generalised mathematical model of
measurement systems-Dynamic characteristics.

UNIT-II
Electronic analog meters-DC and AC Voltmeters, AC and DC bridges- Digital method of
measuring frequency, period, velocity. Displacement and speed Display Devices- CRO’s -
LED’S ,LCD’s.

UNIT – III
Transducers-Characteristics-Strain gauges-LVDT, Eddy current transducers, Hall effect
transducers, Magnetostrictive transducers, capacitive Transducers –Piezoelectric transducers-
photoelectric Transducers-Thermo electric transducers.

UNIT – IV
Measurement of temperature and Pressure: Manometers ,Bourdon Gauges -Diaphragm,
Bellows-Vacuum Gauges- Mcloid Gauge-Knudsen Gauge, Pirani gauge

Temperature scales –resistance thermometers-Thermistors-Thermocouples-Radiation

Pyrometer- Types and characteristics

UNIT-V
Flow measurement: Differential Flow meters-Operating principle-Different types-Orifice-
Rotameter-Mass flow meter-positive displacement meter-Electromagnetic and Ultrasonic Flow
meters

Level Measurements: Slight glass flow gauge, Displacer torque tubes ,Bubbler tube,
Diaphragm box, D/p methods, resistance <capacitance and Ultrasonic level Gauging
Measurement of PH, humidity ,Moisture and Viscosity

Textbooks:
1. A course in Electronic measurements and Instrumentation , A.K.Sawhney, Dhanpat Rai
& sons,1998
2. Measurement Systems , Application and design, E.O.Doeblin, McGraw Hill,1990.
Mechanical and Industrial Measurement, R.K.Jain, Khanna Publishers,1996

http://it.pec.edu 112/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 081 : INFORMATION TECHNOLOGY FOR ENGINEERS
(Offered by Information Technology)

UNIT I
INTRODUCTION:Information Age; Responses – Information system; Infrastructure
and Architecture – IT support for organizations; Types of information systems –
Managing IT – Basic of computer hardware and software for IT infrastructure- input
devices, output devices, memory devices.

UNIT II

COMMUNICATION NETWORKS FOR IT:Telecommunication system: Networks:

LAN, WAN, ETHERNET, Network server, Network software; Network processing
strategy; Telecom applications; Network OS; Operation and services provided; ftp,
Usenet, Remote login, Telnet.

UNIT III

INTERNET : Evolution - WWW, Websites, Homepages, Search Engines, URL, Name

server, Proxy server, Gateways, Routers, Modem, Switches, Email server, Inter Service
Providers, Internet connectivity (VSAT, Leased line, Dial-up line, Radio link) .

UNIT IV

E-COMMERCE AND IT SYSTEMS : E-commerce: Business applications: Market

research and customer support Infrastructure, payments and other support - Planning and
Management: Principles for IS planning: Role of IS and user departments; Resources; IT
architecture; Centralized and no centralized; Client/server; End user computing
architecture; Managing IS; Organizational structure; IS vulnerability; protection;
Security; Network Protection and Firewalls Risk management and cost-Benefit analysis.

UNIT V
APPLICATIONS: Information system; GIS EDI and EFT; Extranets; Implementation;
Data, Knowledge and decision support; Decision making- and support systems; Data
visualization technologies; Knowledge Management- and Discovery and analysis - AI
and Expert systems; Intelligent agents; Virtual reality; Ethical and global issues;

REFERENCE BOOKS :
1. E. Turban et al, 'Introduction to IF' , John Wiley and sons, IC, 2000.
2. Turban et al, 'IT for management: Making connection for strategic Advantage',
2nd Edition, John Wiley and sons, Inc., 2001.
3. Dennis, P., Curtin et al, 'IT the breaking wave' Tata McGraw-Hill, 1999.
4. Steven Alter, IS, A management perspective, 1999.
5. Gralla Preston, 'How the internet works', Techmedia Publication, 4th Edition, 2000.

http://it.pec.edu 113/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 082 - BIO INFORMATICS
(Offered by Information Technology)
UNIT I
Coding -Common health care language - coding techniques – coded and quasi coded
data Medical vocabulary – industry wide communication standards HL7 – unified
medical language system – quality of care paradigms, risk management bioethics.

UNIT II

Information networks - Internet – facilities used in the internet web browsers STTP 5,
HTTP, HTML, URL – European molecular biology network – national centre for bio-
technology information.

UNIT III

Patient record maintenance - Electronic patient record – models or ERP –

environmental services – metrics – telemedicine – community networks –
telemedicine peripherals and equipment selection – anatomy of video conferencing
technology.

UNIT IV

Basic Genetic Science : Study of cell, nucleus, chromosomes and their components
Evaluation of chromosomes, Impact of chromosomes on genes, gene study. Protein
information resources - Biological data basics – primary secondary data basics – Protein
pattern data basics – DNA sequences data basics - DNA analysis - Genes structure and
DNA sequences – interpretation of EST structures – different approach to EST analysis.

UNIT V

Alignment techniques - Data base searching - comparison of two sequences– identity and
similarity – global and global similarity – global and local alignment- multiple sequence
alignment – data basis of multiple alignment – secondary data base. Expert system-
Principles of expert system – statistical decision trees – integration of decision support in
clinical processors.

TEXT BOOK
1. T.K. Attwood , D.J. Parry-Smith, "Introduction to Bioinformatics", Pearson
Education, 1999
REFERENCE BOOKS
1. Coiera E, "Guide to medical informatics, The internet and telemedicine,
Chajsman & Hall medical", London 1997.
2. Bernser, E.S., " Clinical decision support systems, Theory and practice, Springer-
Verlag" , New York, 1999.
1. Dan E. Krane , Michael L., Raymer, "Fundamental Concepts of Bioinformatics",
Pearson Education, 2002.

http://it.pec.edu 114/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 201 - FINITE ELEMENT METHOD
(Offered by Mathematics)

UNIT – I (Weighted residual and Variational methods)

Introduction, Weighted residual methods: Least square, Partition, Galerkin, Moment and
Collocation methods. Variational method: Ritz method. (10 Hours)

UNIT - II (Finite Element method)

Finite elements: Different types and their functions. Numerical integration over finite
elements. Finite Element method: Ritz method, Least square method and Galerkin
method. (10 Hours)

UNIT - III
Solution of initial value problems for ordinary differential equations and initial boundary
value problems for partial differential equations by finite element method. (9 Hours)

UNIT - IV
Solution of boundary value problems for ordinary differential equations and partial
differential equations by finite element method. (9 Hours)

UNIT - V
Solution of some nonlinear differential equations by finite element method. Solution of
some practical application problems arising in various branches of engineering. (7 Hours)

Text Book:
1. M.K. Jain, Numerical solution of differential equations, Wiley Eastern Limited,
New Delhi, 1987.
2. J. N. Reddy, An introduction to the Finite Element Method, McGraw Hill,
Singapore, 1985.

Reference Book:

1. O.C. Zienkiewicz, The Finite Element Method, 3rd Edition, McGraw Hill, 1977.
2. C.S. Desai and J. F Abel, Introduction to the Finite Element Method, CBS
Publishers and Distributors, New Delhi, 1987.
3. R. Wait and A.R. Mitchell, Finite Element Analysis and Applications, John Wiley
& Sons, New York, 1986.
4. A. J. Davies, The Finite Element Method: A first approach, Clarendan Press,
Oxford, 1980.
5. H. Grandin Jr., Fundamentals of the Finite Element Method, Mcmillan, New
York, 1986.
6. K.W. Morton, Numerical solution of convection-diffusion problems, Chapman
and Hall, 1996.

http://it.pec.edu 115/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UIE 202 - COMPUTATIONAL FLUID DYNAMICS

(Offered by Mathematics)

1. Classification and finite difference formulations :

Classification: Elliptic, Parabolic, Hyperbolic, System of first order p.d.e and
System of second order p.d.e. Initial and boundary conditions, Lax’s equivalance
theorem,
Finite difference formulations: central, forward, backward differences.
Uniform and non-uniform grids, numerical errors, grid independence test.

2. Numerical Solution of Ordinary and Partial differential equations

Runge-Kutta methods, Finite difference methods for O.D.E,
Elliptic: Laplace and Poisson equations. Parabolic: One- dimensional and Two-
dimensional heat conduction equations. Hyperbolic: One- dimensional wave
equation.

3. Incompressible flows:
Governing equations: Primitive variables formulation, Vorticity-Stream function
formulation in Cartesian, spherical and cylindrical polar coordinates.
Determination of pressure-by-pressure Poisson equation,
Flow inside a lid-driven cavity, axis symmetric flow past a sphere and cylinder,
application of upwind difference scheme.

4. Compressible flows:
Governing equations: Euler equations and Burgers equation
Lax-Friedrichs and Lax-Wendroff methods.
Flux splitting method, Riemann solvers, Kinetic schemes, Relaxation schemes.
FTCS, FTBCS, DUFORT-FRANKEL, Mac Cormack (explicit methods)
Mac Cormack, BTCS, BTBCS (implicit methods) for solving inviscid and viscous
Burgers equation.

5. Heat flows:
Steady heat conduction in rectangular, spherical and cylindrical geometries, Transient
heat conduction, steady one-dimensional convection-diffusion equation, Heat transfer
in the boundary layer over a flat plate.

TEXTBOOKS
Muralidhar, K and Sundararajan, T., “ Computational Fluid Flow and Heat Transfer”(2nd edition).
Narosa Publishing house, New Delhi.
(units 3, 4 and 5)

Klaus A. Hoffmann and Steve T. Chiang, “Computational Fluid Dynamics for Engineers” Vol.1.A
publication of Engineering Education system, Wichita, Kansas, 67208-1078, USA. ASIN:
0685272257
(units 1, 3 and 4)

http://it.pec.edu 116/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
Grewal, B. S., “ Numerical methods in Engineering and Science”, Khanna Publishers
(unit 2)

REFERENCES

Langtangen, Hans P.
Computational Partial Differential Equations
Numerical Methods and Diffpack Programming
Publisher: Springer verlag
Series: Texts in Computational Science and Engineering, Vol. 1
2nd ed., 2003, XXVI, 855 p., Hardcover
ISBN: 3-540-43416-X ($ 62.99)

Langtangen, Hans P.; Tveito, Aslak (Eds.)

Advanced Topics in Computational Partial Differential Equations
Publisher: Springer verlag
Series: Lecture Notes in Computational Science and Engineering, Vol. 33
2003, XIX, 658 p., Softcover
ISBN: 3-540-01438-1 ( $99.00)

M.O. Deville, P.F. Fischer and E.H. Mund

High-Order Methods for Incompressible Fluid Flow
ISBN: 0521453097, Publisher: Cambridge University Press 2002 ($ 85.00)

Pieter Wesseling Principles of Computational Fluid Dynamics

Publisher: Springer-Verlag ISBN:3540678530 ($ 135.59)

John D., Jr. Anderson. Computational Fluid Dynamics

Publisher: Mc-Graw Hill Science/Engineering/Math,
ISBN:0070016852, ($82.50)

Joel H. Ferziger, Milovan Peric. Computational Methods for Fluid Dynamics

Publisher: springer verlag, ISBN:3540420746, ($59.95)

Suhas V Patankar “Numerical Heat Transfer Fluid Flow”,

Publisher: Hemisphere Publishing Corporation, 1980.
ISBN:0891165223 ($94.95)

Anderson, D.A., Tannehill, I.I., and Pletcher, R.H., “Computational Fluid Mechanics and Heat
Transfer (2nd edition)
Publisher: Taylor and Francis
ISBN:156032046X. ($92.97)

Bose, T. K., “Numerical Fluid Dynamics”

Publisher: Narosa Publishing house Pvt.Ltd
ISBN: 8173191662 .($69.99)

http://it.pec.edu 117/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UID 211 -INTRODUCTION TO NANO TECHNOLOGY

(offered by Department of Physics)

Unit-1: Introduction to Physics of Solid State

Intermolecular forces: thermodynamic aspects - Quantum Mechanical Treatment of

the Many-Particle Problem - Potential Energy Surface - Pair Potential Approximation
- Advantages and Limitations of the Pair Potential Approximation -
Phenomenological Potentials - Pseudo-Potentials - Many-Body Potentials.

Unit - 2: Fundamentals of nanoscience

Size dependence of properties - Particle size determination - Bulk to nano transition -

Semiconducting nanoparticles - Carbon nanostructures - Mechanical properties
(hardness, ductility, elasticity) - Optical properties of nanotubes - Electrical properties
of nanotubes.

Unit - 3: Preparation of nanosystems.

Introduction to nanolithography - Carbon nanotubes: preparation - Synthesis and

preparation of nanomaterials (crystalline and thinfilm) - Physical and chemical
methods - Control and stability (size, shape, composition).

Unit - 4: Characterization of nanosystems.

Thermal Stability - Basic Material Properties - Mean Values and Correlation

Functions - X-ray diffraction - Scanning Electron Microscopy - Scanning Tunneling
Microscopy - Electron Microscopy - X-ray absorption spectroscopy - Photoelectron
emission spectroscopy.

Unit - 5 : Nano-Engineering: Applications

Nanotubes, nanowires, and nanodevices-introduction - Functional Nanostructures - Introduction
to molecular electronics - Field emission and Shielding - Applications in Computers -
Applications in fuel cells - Applications in chemical sensors - Applications in mechanical
reinforcement - Microelectromechanical systems (MEMs) - Nanoelectromechanical systems
(NEMs) - Molecular and Supramolecular Switches.

Text Books:

Unit-1 and 2:

http://it.pec.edu 118/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

(a) Charles P. Poole and Frank J Owens. Introduction to nanotechnology.

Wiley Interscience, 2003. (US $ 80.00).
(b) Crandall, B. C. and Lewis, James (Eds.) “Nanotechnology: Research and
Perspectives” MIT Press, 1992.

Unit-3 and 4:
(a) P E J Flewitt, R K Wild. Physical Methods for Materials Characterization. 2nd Edition, Institute
of Physics Publishing, UK. 2004.
(b) Gottstein, Günter. (2004) Physical Foundations of Material Science. Springer Verlag.

Unit-5:
Cleland, Andrew N. (2003). Foundations of Nanomechanics: From Solid-State Theory to Device
Applications. Springer Verlag.

References for further study:

1. J M Vail, Winnipeg. Topics in the Theory of Solid Materials. Institute of Physics Publishing, UK.
2004.
2. M W Barsoum. Fundamentals of Ceramics. Institute of Physics Publishing, UK. 2004.
3. A S Edelstein, R C Cammarata, Nanomaterials: Synthesis, Properties and Applications. IOP
Publishing, UK, 1998. ($70.00)
4. Bhushan, Bharat (Ed.) (2004) Springer Handbook of Nanotechnology
(With CD-ROM) ISBN: 3-540-01218-4 (EURO 200.00)
5. Awschalom, D.D.; Loss, D.; Samarth, N. (Eds.) (2002)
Semiconductor Spintronics and Quantum Computation. Springer Verlag.
ISBN: 3-540-42176-9 (EURO 70.00)
6. Vincenzo Balzani. Molecular Devices and Machines : A Journey into the Nanoworld Wiley
VCH, 2003, ($92.00).
4. Peidong Yang. Chemistry of Nanostructured Materials. World Scientific, 2004. ($84.00)
5. Andrzej W. Miziolek et. al., Defense Applications of Nanomaterials
American Chemical Society, 2004. ($150.00)
6. Liming Dai. Intelligent Macromolecules for Smart Devices: From Materials Synthesis to Device
Applications (Engineering Materials and Processes. Springer Verlag 2004. ($150.00)
10. Michael Rieth. Nano-engineering in Science and Technology: An Introduction to the World of
Nano-Design, World Scientific, 2003. ($26.00).
11. Hari Singh Nalwa.
Handbook of nanostructured materials and nanotechnology.
5 volume set, 3583 pages; (US $ 1500.00). Academic Press, 2000.

http://it.pec.edu 119/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UID 212 - Novel and Intelligent Materials

( offered by Department of Physics)

Unit – 1: Introduction to functional materials. 10 hours

Introduction to functional materials - Phase transition and anomalies - Microscopic,
mesoscopic, macroscopic phenomena and symmetry - Energy conversion - Examples
of functional materials - Thermally responsive materials - Materials responsive to
electric, magnetic and stress fields - Increased functionality through (i)
Morphotrophic phase boundary and (ii) Domain engineering.

Unit-2 Actuators and adaptronics 10 hours

Definition. of an actuator - Actuator as part of system - Intelligent actuators - Smart
actuators - Piezoelectric actuators – Theory -Technical transducers - Comparison
with other actuator types - Example applications - Magnetostrictive actuators -
Theory of magnetostriction in magnetostrictive actuators - Properties of shape
memory alloys - Electrical shape memory – actuators - Innovative applications.

Unit-3: Rheological fluid and Chemical actuators. 10 hours

Electrorheological fluid actuators - Limitations to the concept of electrorheological
fluids - Summary of advantages of ER fluids - Magnetorheological (MR) fluid
actuators - Description of MR fluids - Basic MR device design consideration - Linear
MR fluid dampers.- Electrochemical actuators: fundamentals - Construction of
reversible actuators.

Unit-4: Nanomaterials 10 hours

Size dependence of properties - Particle size determination - Bulk to nano transition -
Semiconducting nanoparticles - Carbon nanostructures - Mechanical properties
(hardness, ductility, elasticity) - Optical properties of nanotubes - Electrical properties of
nanotubes.

Unit-5: Fiber optic sensors and Magnetoresistance 10 hours

Physical principle of fiber optic techniques - Types of fiber sensors and sensor
selection - Integrating and Quasi-Distributed Long-Gauge-Length sensors-Short-
Gauge-Length sensors. – Introduction to magneto-resistance – Giant
magnetoresistance – Colossal magnetoresistance – Materials – Perovskite oxides –
Applications in spintronics like spin transistor and spin valve.

Textbooks:

Unit-1 Hartmut Janocha (Editor), Daniel J. Jendritza, Hartmut Hanocha.

Adaptronics and Smart Structures: Basics, Materials, Designs and Applications.
Springer Verlag, 1999.

http://it.pec.edu 120/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
Unit-2: V. Srinivasan. Smart Structures: Analysis and Design. Cambridge university press,
2000. Unit-3: Mukesh V. Gandhi, Brian S. Thompson. Smart Materials and Structures.
Kluwer Academic Publishers, 1992.
Unit-4: Charles P. Poole and Frank J Owens. Introduction to nanotechnology. Wiley
Interscience, 2003.
Unit-5: Tapan Chatterji. Colossal Magnetoresistive Manganites. Kluwer Academic
Publishers. 2004.

References for further study:

1. Mel Schwartz. Encyclopedia of Smart Materials Set. (1200 pages)
John Wiley & Sons 2001.
2. Zhong Lin Wang, Z. C. Kang. Functional and Smart Materials: Structural Evolution
and Structure Analysis Plenum press. 1998.
3. Ahsan Hariz , Vijay K. Varadan, Olaf Reinhold. Smart Materials, Structures, &
Integrated Systems. The International Society for Optical Engineering, 1997.
4. Alan R. Wilson, Hiroshi Asanuma. Smart Materials.
The International Society for Optical Engineering, 2001.
5. Janet M. Sater, Manfred Wuttig. Smart Materials Technologies.
The International Society for Optical Engineering; 1998.
6. Malcolm E. Lines, Alastair M. Glass. Principles and Applications of Ferroelectrics
and Related Materials. Oxford university press; 2001.
7. Elbio Dagotto, G. Alvarez, S. L. Cooper, A. L. Cornelius, A. Feiguin, J.
Fernandez-Baca, D. Gibbs, J. P. Hill, T. Hotta. Nanoscale Phase Separation and
Colossal Magnetoresistance. Springer Verlag. 2003.
8. G Manson; N Parkes; G R Tomlinson; K Worden; W A Bullough; W J Staszewski,
(2002) Smart Technology Demonstrators and Devices IOP Publishing.
9. Inoue, A., Hashimoto, K. (Eds.) (2001). Amorphous and Nanocrystalline
Materials: Preparation, Properties, and Applications Springer Verlag.
10. Sensors and Their Applications XII (2003). IOP Publishing, U.K.
9. C. M. Friend (Editor). Smart Materials and Structures. Chapman and Hall, 1998.

http://it.pec.edu 121/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________
UID 221 - INSTRUMENTAL METHODS OF ANALYSIS
(Offered by Department of Chemistry)

UNIT I

Electromagnetic radiation – different regions, their wavelengths, frequencies and

energies. interaction of electromagnetic radiations with matter – atomic, molecular,
electronic interaction. Basic principles of spectroscopy – emission and absorption of
radiation. Radiation sources, detectors.

UNIT II

Molecular spectra – UV-visible spectroscopy - principle – UV-visible

spectrophotometers – instrumentation techniques. IR spectroscopy – principle, single and
double beam IR spectrophotometers – instrumentation techniques.

UNIT III

Nuclear magnetic resonance spectroscopy – basic principles and instrumentation

techniques. Principles of ion optics – ion sources, single focusing and double focusing
mass spectrometers – principles and instrumentation techniques.

UNIT IV

X-ray fluorescence spectrometry - basic principles and instrumentation techniques. Flame

emission and atomic absorption spectroscopy - basic principles and instrumentation
techniques.

UNIT V

Electrochemical methods – conductometry, potentiometry, pH meter - principles and

instrumentation. Principles of gas and liquid chromatography – gas chromatograph and
HPLC - instrumentation.

Text book

1. H.H. Willard, L.L. Merit, J.A. Dean and F.A. Settle, Instrumental methods of
analysis, 7 th edition, CBS Publishers and Distributers, New Delhi, 1986.

Reference books
1. D.A. Skoog and D.M. West, Principles of Instrumental Analysis, 2 nd edition,
Holt-Saunders, 1980.
2. Brain S. Furniss, Antony J. Hannaford, Peter W.G. Smith and Austin R. Tatchel,
Vogel’s Text book of Practical Organic Chemistry, 5 th edition, ELBS-Longman,
1996.

http://it.pec.edu 122/123
Curriculum & Syllabi (Information Technology)
________________________________________________________________________

UID 222 - CERAMIC TECHNOLOGY

(Offered by Department of Chemistry)

Unit I

Nature of ceramic materials-crystalline ceramic materials-silicates and

clay minerals and spinal structures-polymorphic transformations-glass and non-
crystalline phases-structure and composition of glass-surface and interface-
wetting and phase distribution.

Unit II
Ceramic raw materials-clay materials-silicate and silicate minerals-
synthetic raw materials-oxide (like Al2O3, ZrO2, TiO2, MgO) and non-oxide (like
Si3N4, AIN, BN, SiC) raw materials. Synthetic techniques-sol-gel processing,
liquid-phase reaction and hydrothermal synthesis.

Unit III
Processing of ceramics-powder pressing, extrusion, slip casting, firing-
thermal treatment procedure-drying, sintering, annealing-viscosity based
transition points in glass-glass forming methods, glass-ceramics.

Unit IV
An outline of ceramic equilibrium diagrams-one component (SiO2) two
component (Al2O3, Cr2O3, MgO-CaO, MgO-Al2O3, Al2O3, SiO2, Al2O3-BeO) and
qualitative ideas of methods of representation of three component diagrams-
Nucleation-grain growth.

Unit V
Mechanical properties of ceramic materials-elastic properties and
strength-Griffith’s theory-plastic and viscous deformations-strengthening of glass.
Thermal properties-thermal expansion, heat capacity and thermal conductivity-
thermal stresses.

Text Books:

7. L.H. Van Vlack, Physical Ceramics for Engineers, Addison Wesley, 1964.
8. F.H. Norton, Elements of Ceramics, Addison Wesley, 1974.

Reference Books:
1. W.D. Kingery, H.K. Bowen, D.R. Uhlmann, Introduction to Ceramics, 2nd edition,
John Wiley & Sons, 1991.
2. D. Ganguli and M. Chatterjee, Ceramic powder preparation: A handbook, Kluwer
Academic Publishers, 1997.
3. David Segal, Chemical Synthesis of advanced ceramic materials, Cambridge
University Press, 1989.
4. W. D. Kingery, Ceramic Fabrication Process, John Wiley 1960.

http://it.pec.edu 123/123