SpoolRunner 100 ™

For use with Handler 210MVP ® 250766

March 2011

New! G reat for aluminum MIG welding to eliminate

feeding problems associated with soft
aluminum wire. Quick and easy to install on the
Handler 210MVP.
Includes:
10-ft. (3 m) cable lead MIG weld 18 ga.–1/4 in. (1.2 – 6.3 mm) aluminum
Rugged plastic carrying case with the Handler 210MVP. Also for use with mild
Extra contact tips and stainless steel wires. Rated 150 amps at 60%
Extra nozzle duty cycle.

Applications:
Aluminum Fabrication/Repair
Trailer Fabrication/Repair
Auto and Marine Repair
Sign Manufacturing
#300796

Hobart SpoolRunner
100 Spool Gun is
warranted for 1 year
(90 days for
industrial use).

Features and Benefits

Easily accessible drive rolls. Screw-style drive roll tension

adjustment.

Threaded nozzle and contact tips.

Internal adjustment for spool
hub tension.

Enclosed compartment keeps

Spring-loaded 4 inch (102 mm) rolls of wire
Feedhead Lead tension-release arm clean. Clear cover allows easy
for easy wire loading. visibility of wire supply.
Trigger Lead

Spring strain relief protects

power cable from wear.

Specifications (SUBJECT TO CHANGE WITHOUT NOTICE.) USE WITH HANDLER 210MVP.

Welding Electrode Wire Spool Size Net Weight with

Output Rating Diameter Capacity Wire Speed Capacity Dimensions Cable Assembly
150 A at .023 – .035 in. (0.6 – 0.9 mm) 115 –715 IPM 4 in. (102 mm) H: 11-1/2 in. (291 mm) 5 lb. (2.3 kg)
60% Duty Cycle aluminum, steel and stainless steel (4.1– 20.4 MPM) W: 2-1/4 in. (57 mm)
L: 8 in. (203 mm)
Consumables
Note: SpoolRunner 100 is shipped with three .030 in. Drive Roll (1)
and three .035 in. contact tips. Nozzle #186405 #199731 For .023/.025 in.
(0.6 mm) wire.
#186413 For .030/.035 in.
(0.8/0.9 mm) wire.
Contact Tips (5 per package)
#199730 For .023/.025 in. (0.6 mm) wire. Push Roll (1)
#186419 For .030 in. (0.8 mm) wire. #199732 For .023/.025 in.
#186406 For .035 in. (0.9 mm) wire. (0.6 mm) wire.
#186414 For .030/.035 in.
(0.8/0.9 mm) wire.

Typical Installation for SpoolRunner™ 100 Spool Gun to Handler® 210MVP

It’s quick and easy to install the SpoolRunner 100 Spool Gun on the Handler® 210MVP. Just plug the power pin of the spool gun into the feedhead,
attach the trigger lead and flip the switch on the inside panel for spool gun operation. Install the correct wire and gas for the job and its ready to go.

Spool Gun
Gas Hose to Gas Regulator Trigger Lead
Handler 210MVP
115/230 VAC Power Cord Spool Gun Weld Cable

Work Cable Workpiece

Hobart Welders An Illinois Tool Works Company hobartwelders.com

Hobart Welding Products Service 800-332-3281 Sales 800-626-9420

Litho in USA