Scribd
Upload
47 views

Omron

This document provides specifications for an inductive proximity sensor model E2E-X5MY15 2M including its ratings and performance, sensing method and distance, power supply and output details, operating conditions and temperature/voltage influence, insulation/dielectric strength, vibration/shock resistance, degree of protection, applicable standards and certifications, connection method, materials, and accessories. The sensor uses an inductive sensing method with a sensing distance of 5-10mm and differential of 10% of sensing distance for ferrous metal targets.

Uploaded by

Cyboss
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
47 views

Omron

This document provides specifications for an inductive proximity sensor model E2E-X5MY15 2M including its ratings and performance, sensing method and distance, power supply and output details, operating conditions and temperature/voltage influence, insulation/dielectric strength, vibration/shock resistance, degree of protection, applicable standards and certifications, connection method, materials, and accessories. The sensor uses an inductive sensing method with a sensing distance of 5-10mm and differential of 10% of sensing distance for ferrous metal targets.

Uploaded by

Cyboss
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

E2E-X5MY15 2M

Ratings / Performance
Shield Unshielded
Cylinder type sensing head size M12
Sensing method Inductive type
Sensing distance 5 mm -10% to +10%
Setting distance 0 to 4 mm
Differential distance 10% Max. of sensing distance
Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object Iron 15*15*1mm
Response frequency AC: 25 Hz (average)
Power supply voltage 24 to 240 V
Operating voltage range 20 to 264 VAC
Leakage current 1.7 mA Max.
Control output (Output type) AC 2-wire models
Control output (Switching
5 to 200 mA
capacity)
Indicator Operation indicator(red)
Operation mode NO
Protective circuit Surge suppressor
Standard or Different frequency Different frequency
Operating: -40 to 85 CEL
Ambient temperature Storage: -40 to 85 CEL
(with no icing or condensation)
Operating: 35 to 95 %RH
Ambient humidity Storage: 35 to 95 %RH
(with no condensation)
+-10% Max. of sensing distance in temperature range of
-25 to +70CEL
Temperature influence +-15% Max. of sensing distance in temperature range of
-40 to +85CEL
(As the basis for sensing distance of 23CEL)
+-1% Max. of sensing distance in rated voltage range +-
Voltage influence 15%. (As the basis for sensing distance at standard power
voltage)
50 M OHM Min. at 500VDC between charged parts and
Insulation resistance
the case
4000 VAC 50/60 Hz for 1 minute between charged parts
Dielectric strength
and the case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in
Vibration resistance
X, Y, and Z directions
Shock resistance 1000m/s2 for 10 times each in X, Y, and Z directions
IEC60529: IP67
Degree of protection
Company standard: Oil-proof
Applicable standard (EC
EN60947-1
Directive (Low Voltage
EN60947-5-2
Directive))
EMI: EN60947-5-2
Emission Enclosure: CISPR11 Group 1 classA
EMS: EN60947-5-2
Applicable standard (EC Immunity ESD: IEC61000-4-2
Directive (EMC Directive)) Immunity RF-interference: IEC61000-4-3
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Burst: IEC61000-4-4
CE marking: Equipped
Applicable standard (CCC
Equipped
mark)
Connection method Pre-wired models (Cable length: 2 m)
Weight (Packed state) approx. 70 g
Material (case) Brass nickel plating
Material (sensing surface) PBT
Material (clamping nuts) Brass nickel plating
Material (toothed washer) Iron zinc plating
Accessories Instruction manual

As of September 29, 20

You might also like