Scribd
Upload
150 views

Comparc TH300

This document provides specifications for a TH 300 light industrial single phase AC welder. It outputs 100 amps at 24 volts with a 20% duty cycle and 135 amps at 25 volts with continuous loading. It has an amperage range of 35-300 amps AC and a maximum open circuit voltage of 80 volts AC. It weighs 49.5 kg and has dimensions of 490x320x350 mm. It is suitable for AC stick welding and various industrial and maintenance applications.

Uploaded by

dedioded
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
150 views

Comparc TH300

This document provides specifications for a TH 300 light industrial single phase AC welder. It outputs 100 amps at 24 volts with a 20% duty cycle and 135 amps at 25 volts with continuous loading. It has an amperage range of 35-300 amps AC and a maximum open circuit voltage of 80 volts AC. It weighs 49.5 kg and has dimensions of 490x320x350 mm. It is suitable for AC stick welding and various industrial and maintenance applications.

Uploaded by

dedioded
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TH 300

LIGHT INDUSTRIAL
1 Phase AC CC
STOCK NUMBER 301-089
Specifications

Rated output,at 20% Output at continuous Amperage Range Max. open- circuit Input at
Frequency loading Kilowatts
duty cycle voltage rated output 220 V
110 V 220 V
60 H z 100 A @ 24 V, AC 135 A @ 25 V 35 - 300 A, AC 80 V, AC 45 A ----- 3.2
This model is available at 300 A @ 24 V, AC 100% duty cycle ----- 70 A 10.5
different frequencies and
voltages. Ask your local
COMPARC distributor

Weight Dimensions

Net: 49.5 Kg (109.1 Lbs) H: 490 mm (19-1/4”)


Ship: 55.0 Kg (121.2 Lbs) W: 320 mm (12-19/32”)
D: 350 mm (13-3/4”)

Features: Comes complete with:


- Continuous mechanical control - Power source
- adjustment in low and high amperage ranges. - Ownerʼs manual
- Forced-draft cooling fan. - Cable set Pass 225T
- Powder paint finish for increased durability
- NEMA rated.

Applications: Process:
- Garages - AC Shielded Metal Arc welding (STICK) 1.6 - 6.4 mm (1/16” to 1/4”)
- Building maintenance E6013 and E6011
- Sheet metal shops
- Metal furniture fabrication
- School maintenance
- Vehicle / Service repair
- Farm maintenance
- Job shops
- Garden furniture fabrication
- Domestic shops
- Occasional users

Plásticos # 17, Col. San Francisco Cuautlalpan, Naucalpan, Estado de México. C.P. 53560 / FAX: + 52 55 55 76 23 58 / www.comparc.com.mx/eng

You might also like