Scribd
Upload
172 views

Installation Instructions: 6 Corporate Parkway Goose Creek SC 29445 WWW Quoizel Com, - .

1. The document provides installation instructions for a light fixture. It instructs the user to unpack parts, turn off power, secure the universal crossbar to the outlet box, connect house wires to fixture wires using wire connectors, position the backplate and secure it, install the shade, and restore power. 2. Key steps include securing the universal crossbar to the outlet box, connecting supply and ground wires between the house and fixture, positioning the backplate and securing it, and installing the shade. 3. Users are advised to consult a licensed electrician if unsure about the electrical installation.

Uploaded by

dayshift5
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
172 views

Installation Instructions: 6 Corporate Parkway Goose Creek SC 29445 WWW Quoizel Com, - .

1. The document provides installation instructions for a light fixture. It instructs the user to unpack parts, turn off power, secure the universal crossbar to the outlet box, connect house wires to fixture wires using wire connectors, position the backplate and secure it, install the shade, and restore power. 2. Key steps include securing the universal crossbar to the outlet box, connecting supply and ground wires between the house and fixture, positioning the backplate and securing it, and installing the shade. 3. Users are advised to consult a licensed electrician if unsure about the electrical installation.

Uploaded by

dayshift5
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSTALLATION INSTRUCTIONS

6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 1. Before beginning installation, carefully unpack and identify all
www . quoizel . com parts referring to the illustration.

2. Turn power to installation point OFF at the circuit breaker.

3. Locate the UNIVERSAL CROSSBAR and secure it to the outlet


OUTLET BOX with (2) OUTLET BOX SCREWS (not supplied). Thread the end
of the NIPPLE into the center of the CROSSBAR. Position the
BACKPLATE over the outlet box. Proceed to locate LOCK
NIPPLE WASHER over the NIPPLE and thread the HEX NUT onto the
NIPPLE. Pass the mounting hole on the center of the
LOCK WASHER
BACKPLATE over the end of the NIPPLE. There should be
HEX NUT enough length protruding from the mounting hole on the
UNIVERSAL
center of the BACKPLATE. If the NIPPLE length is not long
CROSSBAR enough, thread the NIPPLE less into the center of
UNIVERSAL CROSSBAR. Remove the BACKPLATE and
snug the HEX NUT against the UNIVERSAL CROSSBAR with
(2)OUTLET BOX pliers to secure the NIPPLE.
SCREWS(not supplied)
3. Make the connections:(Quoizel recommends 2 people for
SUPPLY WIRE and this step)
GROUND WIRE
Use wire connectors(not supplied) attach the HOUSE GROUND
SOCKET WIRE to the FIXTURE GROUND WIRE; connect the HOUSE
BACKPLATE WHITE WIRE to FIXTURE WHITE (or RIBBED SIDE) SUPPLY
WIRE; connect the HOUSE BLACK (or RED) WIRE to the
FIXTURE BLACK (or SMOOTH SIDE) WIRE. Wrap each
SHADE connection with approved electrical tape.

KNOB 4. Carefully tuck all the wires into the outlet box and position the
BACKPLATE over the NIPPLE and secure by threading the
KNOB onto the end of the nipple. Tighten until snug.

5. Position the SHADE over the SOCKET as shown. Thread the


SOCKET COLLAR onto the SOCKET and hand tighten until snug
to secure the SHADE.
SOCKET
COLLAR 6.Install bulb referring to fixture markings and/or labels for
maximum wattage.

7.Restore power to the installation point ON. Retain this sheet for
future reference.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,


CONSULT A LICENSED ELECTRICIAN!
IS- DI8502
2007-02-13

You might also like