Scribd
Upload
68 views

Introduction For DZB-718 Portable Multi-Parameter Water Analyzer

The DZB-718 is a portable multi-parameter water analyzer that can simultaneously measure pH, mV, conductivity, TDS, salinity, resistivity, dissolved oxygen (DO), saturation, and temperature. It supports continuous, timed, and balanced measuring modes and can store up to 200 sets of measurement data for each parameter. The device has a small size, low power consumption, and IP65 protection for field use. It connects to a PC via USB for data viewing, printing, and deletion.

Uploaded by

Ranndolf Javier
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views

Introduction For DZB-718 Portable Multi-Parameter Water Analyzer

The DZB-718 is a portable multi-parameter water analyzer that can simultaneously measure pH, mV, conductivity, TDS, salinity, resistivity, dissolved oxygen (DO), saturation, and temperature. It supports continuous, timed, and balanced measuring modes and can store up to 200 sets of measurement data for each parameter. The device has a small size, low power consumption, and IP65 protection for field use. It connects to a PC via USB for data viewing, printing, and deletion.

Uploaded by

Ranndolf Javier
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DZB-718 Portable Multi-Parameter Water Analyzer

Main Character:
1. Display several parameter’s measuring value at the same interface. Support to
measure pX/pH, mV, conductivity, TDS, salinity, resistivity, DO, saturation, DO
currency and temp. value simultaneously.
2. Provide several common ion modes randomly, such as H+, Ag+, Na+ , K+, NH4+,
Cl-, F-, NO3-, BF4-, CN-, Cu2+, Pb2+ and Ca2+. As long as user has relevant ion
electrode, user could set up his own ion mode.
3. Can view, print and delete measuring data.
4. With USB interface, intelligent power management. If match with special
communication software, it can be connected with PC.
5. Three measuring modes: continuous measuring mode, timed measuring mode
and balance measuring mode.
6. Support GLP regulation, can print and store 200 sets for each of pH,
conductivity, TDS, salinity and DO. Allow to store 6 kinds of ion measuring
value, including relevant pX value and ion concentration value 100 sets for
each.
7. Small in size, low power dissipation, IP65 protection class for easy moving
and field measurement.

Main Specification:
Measuring Range:
a). mV: (-1999.99 ~ 0)mV, (0 ~ 1999.99)mV;
b). pH/pX: (-2.000 ~ 19.999)pH/pX;
c).Concentration: various concentration values in correspondence to potential
measuring range and indicating electrode.
d). Conductivity: 0.000µS/cm ~ 199.9mS/cm
e). Resistivity: 5.00Ω.cm ~ 20MΩ.cm
f). TDS: 0.000mg/L ~ 19.99g/L
g). Salinity: (0.0 ~ 8.00)%
h). Dissolved Oxygen Concentration: (0.00 ~ 19.99)mg/L
i). Dissolved Oxygen Saturation: (0.0 ~ 199.9)%
j). Temperature: (-5.0 ~ 135.0) ℃

Resolution : Electronic Unit Accuracy:


a). pH/pX: 0.01/0.001pH a). pH/pX: ±0.002pX ± 1 bit
b). mV: 0.1/0.01mV b). mV: ±0.03% (FS)
c). Dissolved Oxygen: 0.01mg/L c). Ion concentration: ±0.5% ± 1 bit
d). Saturation: 0.1% d). Conductivity: ±0.5% (FS) ± 1 bit
e). Temperature: 0.1℃ e). TDS: ±0.5% (FS) ± 1 bit
f). Salinity: ±0.1% ± 1 bit
g). Dissolved Oxygen: ±0.10mg/L
h). Dissolved Oxygen saturation: ±1.0%
i). Temperature: ±0.3℃ ± 1 bit

Input Impedance: ＞3 X 1012Ω


Power supply: 4 pieces AA alkaline cell
Outside Dimension: 210x100x45mm
Weight: 0.5kg

You might also like