0% found this document useful (0 votes)
14 views

Modem

A modem modulates an analog carrier signal to encode digital data for transmission and demodulates a carrier signal to decode received digital data. Modems allow digital data to be transmitted over any medium that carries analog signals. Modems are classified by their data transmission speed in bits per second and by their symbol rate in baud. Standards organizations like ITU-T set standards for modulation techniques and transmission speeds that modems use to ensure interoperability.

Uploaded by

Noopur Dogra
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
14 views

Modem

A modem modulates an analog carrier signal to encode digital data for transmission and demodulates a carrier signal to decode received digital data. Modems allow digital data to be transmitted over any medium that carries analog signals. Modems are classified by their data transmission speed in bits per second and by their symbol rate in baud. Standards organizations like ITU-T set standards for modulation techniques and transmission speeds that modems use to ensure interoperability.

Uploaded by

Noopur Dogra
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

MODEM

What is MODEM??

A modem (modulator-demodulator) is a device that modulates


an analog carrier signal to encode digital information, and also
demodulates such a carrier signal to decode the transmitted
information. The goal is to produce a signal that can be transmitted
easily and decoded to reproduce the original digital data. Modems can
be used over any means of transmitting analog signals, from driven
diodes to radio.

Modems are generally classified by the amount of data they can


send in a given time unit, normally measured in bits per second (bit/s,
or bps). They can also be classified by the symbol rate measured in
baud, the number of times the modem changes its signal state per
second. For example, the ITU V.21 standard used audio frequency-
shift keying, to carry 300 bit/s using 300 baud, whereas the original
ITU V.22 standard allowed 1,200 bit/s with 600 baud using phase shift
keying.

STANDARDS
Prior to the ITU-T(International Telecommunication Union-
telecommunication) standards, the American Telephone and Telegraph
Company and the Bell System offered its own standards (Bell 103
and Bell 212A) at very low transfer rates.
Another set of standards, the Microcom Networking Protocol
(MNP) offered error correction.
Some modems offer both MNP and ITU Standards.

You might also like