Scribd
Upload
23 views

Testing Report

This document provides the results of testing performed on plastic pipes as per ASTM D standards. It includes 11 clauses testing various requirements such as outer diameter, wall thickness, length, appearance, vicat softening temperature, burst pressure, flattening test, tensile strength, and blow test resistance. All test results were found to meet the specified requirements. Additionally, it lists the sizes and dimensions of various plastic fittings including brass and plastic rings, fittings, unions, and end plugs.

Uploaded by

bhabani2345
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
23 views

Testing Report

This document provides the results of testing performed on plastic pipes as per ASTM D standards. It includes 11 clauses testing various requirements such as outer diameter, wall thickness, length, appearance, vicat softening temperature, burst pressure, flattening test, tensile strength, and blow test resistance. All test results were found to meet the specified requirements. Additionally, it lists the sizes and dimensions of various plastic fittings including brass and plastic rings, fittings, unions, and end plugs.

Uploaded by

bhabani2345
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

SPERRY PLAST LTD

Testing Report SPL / F02 / R0


AS PER ASTM D
SIZE OF PIPE BRAND NAME : DATE:
BATCH NO SDR : QTY:
Clause no Requirement Frequancey No of sample Specification Observation Remarks
Required
Dimension (mm )
1 Mean out side diameter Each control unit 10

2 Wall thickness Each control unit 10

3 Effective Length Each control unit 10 3 mtr

4 Pipe end Each control unit 10 Satisfactory

5 Visual Appearance Each control unit 10 Satisfactory


7 3
6 Vicat Softening Temp Each control unit 1 >110 0C

Pipe shall Not Fail


7 Brust Pres.at82 ºC for 6 minut Each control unit During the Prescribed
Duration
Pipe shall Not Fail
8 Sustained Pres.at 82 ºC for 4 Hr Each control unit 1 During the Prescribed
Duration

Pipe Shall Show No


9 Flatening Test Each control unit 1 Signs off Cracking
Spliting & Breaking

10 Tensile Strength At 27± 2 0C Each control unit 1 > 50 Mpa

11 Resistance to External Blow at 27ºC Each control unit 10 < 10%

Quality Inspector Quality Incharge


ITEM NAME SIZE RUBBER O RING SIZE
BRASS RING ½'' 16X2
BRASS RING 1'' 16 X 2.5
BRASS MTA ½'' 10 X 2.5
BRASS FTA ½'' 10 X 2.5
BRASS MTA ¾'' 12 X 2.5
BRASS FTA ¾'' 12 X 2.5
BRASS MTA 1'' 14 X 3
BRASS FTA 1'' 14 X 3
BRASS MTA 1¼'' 22 X 3.5
BRASS FTA 1¼'' 22 X 3.5
BRASS MTA 1½'' 32 X 3.5
BRASS FTA 1½'' 32 X 3.5
BRASS MTA 2'' 32 X 3.5
BRASS FTA 2'' 32 X 3.5

FTA ( PLASTIC ) ½'' 18.65 X 14.5 X 3


FTA ( PLASTIC ) ¾'' 24 X 18.6 X 3.5
FTA ( PLASTIC ) 1'' 30.7 X 23.7 X 3.5
FTA ( PLASTIC ) 1¼'' 31.5 X 39 X 4
FTA ( PLASTIC ) 1½'' 36.5 X 45 X 4
FTA ( PLASTIC ) 2'' 46 X 56.8 X 4

TANK NIPPLE ( PLASTIC ) 1'' 50.1 X 32.1 X 3

UNION ( PLASTIC ) ½'' 17 X 3.5


UNION ( PLASTIC ) ¾'' 29.5 X 22.7 X 3.5
UNION ( PLASTIC ) 1'' 37.8 X 30.9 X 3.5
UNION ( PLASTIC ) 1¼'' 43.7 X 36.6 X 3.8
UNION ( PLASTIC ) 1½'' 52 X 45.5 X 5.3
UNION ( PLASTIC ) 2'' 56 X 5.2

END PLUG ( PLASTIC ) ½'' 13.5 X 2.5

You might also like