Scribd
Upload
32 views

Model Number Spec

The document provides information about locating engine model and specification numbers for Tecumseh engines produced in 2004 or later. It explains that the model number, specification number, and date of manufacture are needed to find parts. It then shows sample engine identification labels and describes what each part of the label indicates, such as the engine model, specification number, and date of manufacture.

Uploaded by

Vasile Tudose
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
32 views

Model Number Spec

The document provides information about locating engine model and specification numbers for Tecumseh engines produced in 2004 or later. It explains that the model number, specification number, and date of manufacture are needed to find parts. It then shows sample engine identification labels and describes what each part of the label indicates, such as the engine model, specification number, and date of manufacture.

Uploaded by

Vasile Tudose
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

General Information

The following information is being provided to assist you in locating and recording your engine model and
specification numbers. This information will be needed to use this book or obtain parts from a local Tecumseh dealer.

Model Numbering System for Tecumseh’s


Full Engine Line
2004 Production and Later

LOCATING AND READING ENGINE MODEL AND SPECIFICATION


THE FOLLOWING WILL BE NEEDED TO LOCATE PARTS FOR YOUR ENGINE.

Model Specification (DOM)


ENGINE: TVM195 150288G 8150C

ENGINE MODEL SPEC NO. D.O.M


TVM195 150288G 8150C

Typical Engine I.D. Label


TECUMSEH POWER COMPANY
THIS ENGINE MEETS 1995-1998 CALIF/US EPA
PH1 APPLICABLE EMISSION REGULATIONS
FOR ULGE ENGINES FUEL REGULAR
UNLEADED OIL SAE 30

TVM195 150288G (E)


STP318U1G2EA
318 8150 C

ENGINE MODEL NUMBER


LOCATED UNDER COVER ENGINE MODEL
NUMBER
LOCATIONS

ENGINE MODEL
NUMBER
LOCATIONS

3
Model Numbering System for Tecumseh’s
Full Engine Line
2004 Production and Later

Reviewing The Engine ID Label


Effective with the 2004 Model Year, we have changes to the engine I.D. label on our products. The following
pages will explain the information contained on the label dependent on the age of your product.

Specification Number
The numbers following the model number make up the
specification number.
Using model LV195EA-361541B, as an example,
interpretation is as follows:
LV195EA-361541B is the model and specification
number.

L V 195 E A - 361541B (B)


{
¥
¥

¥
¥
¥{

¥{
¥

Warranty Code
Is the specification number used
for properly identifying the parts
of the engine
Indicates a standard power configuration
Indicates EPA/CARB compliant
Indicates a 195 cc displacement
Indicates a vertical shaft configuration
Indicates an L-Head, side valve configuration Typical Engine
I.D. Label
Date of Manufacture Locations
The Date of Manufacture (D.O.M.) indicates the
production date.

For this example, 03188BC0010 is the D.O.M. (Date of


Manufacture).
Day of Individual
Year Year Mfg Assembly Serial #
2003 188th Facility Line / Shift 10th unit built
ENGINE MODEL NUMBER
LOCATED UNDER COVER
03 188 B C 0010

ENGINE MODEL
NUMBER
LOCATIONS

ENGINE MODEL NUMBER LOCATIONS

You might also like