Scribd
Upload
119 views

Eye Washes G1899: Guardian Equipment

Spray heads swivel 90 degrees down from storage to operational position. Available in a variety of spray head configurations to minimize obstructions at a sink. TMV G3600 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water.

Uploaded by

eisenbarger5607
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views

Eye Washes G1899: Guardian Equipment

Spray heads swivel 90 degrees down from storage to operational position. Available in a variety of spray head configurations to minimize obstructions at a sink. TMV G3600 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water.

Uploaded by

eisenbarger5607
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

G1899 Eye Washes

 G1899 Eye Wash, Deck Mounted, AutoFlow™ Swing-Down, All-Stainless Steel

 G1899LH-L  G1899LH  G1899LH-R  G1899L  G1899  G1899R

Units are shown in plan view.

Application: AutoFlow™ eye wash for mounting on Strainer: Unit is furnished with in-line strainer to protect
counter. Constructed entirely in stainless steel. Ideal for valve and spray heads from debris in water line.
use in highly corrosive environments and clean room
applications. Spray heads swivel 90 degrees down Mounting: Valve is installed in Type 316 stainless
from storage to operational position, activating water steel housing. Unit mounts on countertop behind sink.
flow. Available in a variety of spray head configurations Furnished with hardware for securing unit to counter.
to minimize obstructions at a sink. Note: If unit is Construction: Type 316 stainless steel.
not installed at a sink, floor drain should be provided
underneath unit to prevent accumulation of water on floor. Supply: 3/8” NPT male inlet.
Spray Head Assembly: Two GS-Plus spray heads. ™
Sign: ANSI-compliant identification sign.
Each head has a “flip top” dust cover, internal flow control
and filter to remove impurities from the water flow. Quality Assurance: Unit is completely assembled and
water tested prior to shipment.
Valve: 1/2” IPS plug-type valve with Teflon® coated
O-ring seals. Swinging head assembly down from Available Options
storage to operational position opens orifice and activates
 TMV G3600 thermostatic mixing valve precisely
water flow. Unit remains in operation until spray head
assembly is returned to storage position. blends hot and cold water to deliver warm (tepid)
water as provided by ANSI Z358.1-2004.

ETL Listed 101496.


Units have been tested
GUARDIAN EQUIPMENT
to and comply with 660 North Union Street Phone 312 733 2626
ANSI Z358.1 - 2004 Chicago, IL 60610 Fax 312 733 4684
[email protected] gesafety.com
G1899 Eye Washes

ETL Listed 101496.


Units have been tested
to and comply with
ANSI Z358.1 - 2004
Sign Included

This space for Architect/Engineer approval


GUARDIAN EQUIPMENT
660 North Union Street Phone 312 733 2626
Chicago, IL 60610 Fax 312 733 4684
[email protected] gesafety.com
051305 Due to continuing product improvement, the information contained in this
document is subject to change without notice. All dimensions are ±1/4” (6mm).

You might also like