0% found this document useful (1 vote)
813 views

Lab 2.10.2a VLSM 1: Objective

Create an addressing scheme using subnetting and / or variable length subnet masking (vlsm) assign a Class C address 192.168.10 to support the network shown in the diagram. Use of IP unnumbered, NAT, or / 31 subnets are not permitted on this network.

Uploaded by

Ed Dos Santos
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (1 vote)
813 views

Lab 2.10.2a VLSM 1: Objective

Create an addressing scheme using subnetting and / or variable length subnet masking (vlsm) assign a Class C address 192.168.10 to support the network shown in the diagram. Use of IP unnumbered, NAT, or / 31 subnets are not permitted on this network.

Uploaded by

Ed Dos Santos
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Lab 2.10.

2a VLSM 1

Objective
Create an addressing scheme using variable length subnet masking (VLSM).

Scenario
The assignment is the Class C address 192.168.10.0 and it must support the network shown in the
diagram. The use of IP unnumbered or NAT is not permitted on this network. Create an addressing
scheme that meets the requirements shown in the diagram.
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________

28 - 217 CCNP 1: Advanced Routing v 3.0 - Lab 2.10.2a Copyright  2003, Cisco Systems, Inc.
Lab 2.10.2b VLSM 2

Objective
Create an addressing scheme using subnetting and/or variable length subnet masking (VLSM).

Scenario
The assignment is the Class C address 192.168.10.0 and it must support the network shown in the
diagram. The use of IP unnumbered, NAT, or /31 subnets (available on point-to-point networks with
IOS Release 12.2) are not permitted on this network. Create an addressing scheme that meets the
requirements shown in the diagram. First, attempt an IP addressing scheme using traditional
subnetting. If that proves to be impossible, use VLSM.
__________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________

29 - 217 CCNP 1: Advanced Routing v 3.0 - Lab 2.10.2b Copyright  2003, Cisco Systems, Inc.
Lab 2.10.2c VLSM 3

Objective
Create an addressing scheme using VLSM.

Scenario
The assignment is the CIDR address 192.168.24.0/22, and it must support the network shown in the
diagram. The use of IP unnumbered or NAT is not permitted on this network. Create an addressing
scheme that meets the requirements shown in the diagram.
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________

30 - 217 CCNP 1: Advanced Routing v 3.0 - Lab 2.10.2c Copyright  2003, Cisco Systems, Inc.
Lab 2.10.2d VLSM 4

Objective
Create an addressing scheme using VLSM.

Scenario
The assignment is the CIDR address 192.168.30.0/23, and it must support the network shown in the
diagram. The use of IP unnumbered or NAT is not permitted on this network. Create an addressing
scheme that meets the requirements shown in the diagram.
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________

31 - 217 CCNP 1: Advanced Routing v 3.0 - Lab 2.10.2d Copyright  2003, Cisco Systems, Inc.

You might also like