0% found this document useful (0 votes)
121 views

Orifice Calc Gas Rev 0

The document contains calculations for compressible flow through an orifice. It provides input data such as inlet pressure, pressure drop, inlet density, pipe diameter, and orifice diameter. The calculations determine the orifice area, critical pressure ratio, whether flow is critical, discharge coefficient, and flow rates in pounds per second and pounds per hour.

Uploaded by

edufraga
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
121 views

Orifice Calc Gas Rev 0

The document contains calculations for compressible flow through an orifice. It provides input data such as inlet pressure, pressure drop, inlet density, pipe diameter, and orifice diameter. The calculations determine the orifice area, critical pressure ratio, whether flow is critical, discharge coefficient, and flow rates in pounds per second and pounds per hour.

Uploaded by

edufraga
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

ORIFICE CALCULATIONS FOR COMPRESSIBLE FLOW Based on Mink, Chem.

Eng Aug 25, 1980, p91 INPUT DATA P1 dP rho k DI d

01 02 03 04 05 06 07

Inlet Pressure Pressure Drop Inlet Density @ P1

Ratio of Specific Heats Pipe Inside Diameter (Inlet) Orifice Designation OR Orifice Bore

3935.00 1775.00 13.1500 1.620 4.1250 0.0000 0.9540

psig psi lb/ft3 inch in2 inch

08 09 10 11 12 13 14 15 16

Orifice Diameter Inlet Pressure Orifice Area Critical Pressure Ratio Flow Critical? Beta Y Flow Rate Flow Rate

CALCULATIONS d P1

d/DI m m

0.9540 3949.70 0.7148 0.4938 No 0.2313 0.8860 40.16 144570

inch psia in2 lb/sec lb/h

TAG

Orifice downstream of AHO-1311


AREA CALCULATOR

A = r2

Enter d Enter r Enter A

A= A= r= d=

0.000 0.000 0.000 0.000

You might also like