Scribd
Upload
392 views2 pages

Cross Lamp Controller

The GE Transportation Crossing Lamp Controller XLC is an advanced flashing light controller that provides safe and reliable operation for railroad crossings. As a solid-state, 20-amp flasher and two-input device, the XLC can power crossing lights and bells either alone or synchronized with other XLC units to match higher power needs. It has easy-to-use LED indicators, switches, and accessories to simplify installation and troubleshooting without requiring mandatory testing.

Uploaded by

RobertoAndrésBilliardAlvarado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
392 views2 pages

Cross Lamp Controller

The GE Transportation Crossing Lamp Controller XLC is an advanced flashing light controller that provides safe and reliable operation for railroad crossings. As a solid-state, 20-amp flasher and two-input device, the XLC can power crossing lights and bells either alone or synchronized with other XLC units to match higher power needs. It has easy-to-use LED indicators, switches, and accessories to simplify installation and troubleshooting without requiring mandatory testing.

Uploaded by

RobertoAndrésBilliardAlvarado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GE Transportation

The GE - Transportation Crossing Lamp Controller XLC represents an advanced concept in flashing light circuit technology. Using time-tested, all solid-state flasher technology and a B1 relay base package,the Crossing Lamp Controller provides safe, reliable operation. As a 20-amp output/two-input flasher control circuit, the XLC provides the flasher and bell outputs necessary for virtually any standard crossing application. The XLCs ability to synchronize multiple units allows it to be used for applications ranging from a single flasher location to systems with multiple XLCs providing additional output current as necessary to match the locations maximum current draw. With its unique packaging concept and a series of LED indicators and lamp adjustment switches, the XLC provides a low-cost system thats easy to install, set up, and troubleshoot. The XLCs solid state design does not require mandatory testing.

Crossing Lamp Controller XLC


Safe, Reliable Crossing Light and Bell Activation

Accessories
The XLC has the following accessories available to simplify installation and system setup: A lamp arrester panel designed for flasher-only applications (LAP-F) A lamp arrester panel designed for gated locations (LAP-G) A 40-amp lamp resistor panel used for lamp voltage adjustment (LRP-40) A combination 20-amp lamp resistor, surge arrestor panel used with a single XLC with or without gates (Crossing Arrestor Panel XAP-20) A low-output impedance gate interface module, the Vital Relay Driver (VRD), is designed to interface a gate control output to the low-input impedance of most gate mechanisms motor control relays

Specifications
Dimensions Width: 2.5 in (63.5 mm) Height: 8.0 in (203.2 mm) Depth: 8.0 in (203.2 mm) Weight 3.5 pounds (1.59 kg) Operating Temperature Minimum: -40F (-40C) Maximum: +157F (+69C) Relative Humidity 95%, non-condensing Voltage 8 to 16 VDC Current Draw 500 ma maximum B12 100 ma maximum L12 Control Inputs 500 ohms Lamp Output 20 amps maximum Flash Rate 55 flashes per minute Bell Output 2 amps maximum Synchronous Input 10K ohms

Visit us online at www.getransportation.com

doc20052-B

You might also like