Scribd
Upload
27 views

PL16 Series 5mm T1 Flashing LED: Features Absolute Maximum Ratings at T 25°C

P-tec Corporation produces a PL16 Series 5mm T13⁄4 Flashing LED with the following features: - Built-in oscillator and resistor for flashing functionality - GaAsP Hi-Eff Red chip for high light output and low current requirements - Rugged and reliable design suitable for industrial applications - RoHS compliant - Absolute maximum ratings and electrical/optical characteristics are provided including typical forward voltage, minimum luminous intensity, and flashing frequency.

Uploaded by

api-62031994
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views

PL16 Series 5mm T1 Flashing LED: Features Absolute Maximum Ratings at T 25°C

P-tec Corporation produces a PL16 Series 5mm T13⁄4 Flashing LED with the following features: - Built-in oscillator and resistor for flashing functionality - GaAsP Hi-Eff Red chip for high light output and low current requirements - Rugged and reliable design suitable for industrial applications - RoHS compliant - Absolute maximum ratings and electrical/optical characteristics are provided including typical forward voltage, minimum luminous intensity, and flashing frequency.

Uploaded by

api-62031994
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

P-tec Corporation Tel:(866) 695 4162 2405 Commerce Circle Tel:(719) 589 3122 Alamosa CO 81101 Fax:(719) 589

3592 www.p-tec.net [email protected]

PL16 Series 5mm T1 Flashing LED


Features
*Popular 5mm Lens Style with Flange *Built in Oscillator and Resistor *GaAsP Hi-Eff Red Chip used *Low Current Requirements *High Light Output *Reliable & Rugged *IC compatible *RoHS Compliant

Absolute Maximum Ratings at TA = 25C


Reverse Voltage (<100A)...... 3.0 to 5.0V Peak Reverse Voltage........... 0.4V Operating Temperature Range .. - 25C to +85C Storage Temperature Range .... - 40C to +100C Soldering Temperature (1.6mm below body) .... 260C for 5 seconds

Electrical & Optical Characteristics at TA = 25C


Emitting Color Chip Material Peak Wave Length nm Orange-Red GaAsP 635 Dominant Viewing Angle Wave Length 2 nm 626 Deg 30 Forward Voltage (V) Typ 3.0 Max 5.0 Luminous Intensity Vf=5V(mcd) Min 5.0 Typ 8.0 Flashing Frequency @5V(Hz) Typ 2.4

Part Number Color Diffused Lens PL16-CDRF12

All dimensions are in Millimeters. Tolerance is 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads.

8.7

24.0Min.

5.0

2.54 0.1 Anode


1.5typ. 1.0

0.5 Square
5.9

08.01.11 REV 1 JAS

You might also like