Scribd
Upload
3K views

Pneumatic Jack.

This document describes a pneumatic jack that uses compressed air to lift vehicles. It has a pneumatic cylinder that provides lifting power through a reciprocating motion powered by a solenoid valve controlled by a circuit. When actuated, the solenoid valve allows compressed air into the cylinder, causing the piston rod to extend and lift the load plate and vehicle. It has advantages like easy power transmission with low loss, and can be powered by a single compressor for multiple jacks. Its main disadvantage is needing a separate compressor.

Uploaded by

Martin Babyy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
3K views

Pneumatic Jack.

This document describes a pneumatic jack that uses compressed air to lift vehicles. It has a pneumatic cylinder that provides lifting power through a reciprocating motion powered by a solenoid valve controlled by a circuit. When actuated, the solenoid valve allows compressed air into the cylinder, causing the piston rod to extend and lift the load plate and vehicle. It has advantages like easy power transmission with low loss, and can be powered by a single compressor for multiple jacks. Its main disadvantage is needing a separate compressor.

Uploaded by

Martin Babyy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

PNEUMATIC JACK

SYNOPSIS The main target of project is to improve version of a mini pneumatic jack. This will be more efficient for the user. This machine is pneumatic powered which has low co-efficient of friction. A pneumatic cylinder erected provides power to lift up the Jacky. This is a pneumatic powered machine and requires no other means of power to operate. The required components are Compressor, Pneumatic cylinder, Solenoid, Control circuit and Jack. WORKING PRINCIPLE The working medium adopted is compressed air. The compressed air is transmitted through tubes to pneumatic cylinder where power is converted into reciprocating motion. The reciprocating motion is obtained by using an electrically controlled solenoid valve. The input to the solenoid valve is given through the control unit. The reciprocating motion transmitted to the jack through the piston which moves on the cylinder. The jack is mounted on the bottom side of the vehicle chassis as shown in the figure. If the vehicle has to be lifted, the solenoid valve will be actuated. The load plate will be moved towards the ground. As piston rod keeps on extending the vehicle will be lifted. Thus using a pneumatic jack the vehicle can be lifted with ease in operation. ADVANTAGES
Power can be easily transmission Less loss in transmission A single compressor can supply power to many pneumatic Jack.

Low cost
[email protected]

Easy to work and reduces the manual stress DISADVANTAGE Need separate compressor. APPLICATION Used in vehicles instead of screw jack. DRAWING FOR PNEUMATIC JACK

[email protected]

You might also like