Scribd
Upload
210 views

Demo Part

This document provides information for machining an aluminum part on a PC Mill 105 CNC machine. It includes drawings of the part dimensions, a working cycle chart outlining the machining steps and tools used, and specifications for the tools including order numbers, radii, speeds, and feeds. The raw material is a 50x50x15mm aluminum block and the part will be machined using operations like milling contours, drilling holes, and tapping threads.

Uploaded by

Peace
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
210 views

Demo Part

This document provides information for machining an aluminum part on a PC Mill 105 CNC machine. It includes drawings of the part dimensions, a working cycle chart outlining the machining steps and tools used, and specifications for the tools including order numbers, radii, speeds, and feeds. The raw material is a 50x50x15mm aluminum block and the part will be machined using operations like milling contours, drilling holes, and tapping threads.

Uploaded by

Peace
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CNC-EXAMPLES

Demopart Drawing

54 37

50

39

M6

all threads through bore

0.5x45

M20x1.5

0.5x45

4.5 50

9.5

14.5

Material: AlCuPbBi F38 Raw material: 50 x 50 x 15mm

PC Mill 105
1

CNC-EXAMPLES
Demopart
Working cycle Tool Notes

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

Face milling Roughing contour 1 (50 x 50 mm) Roughing contour 2 ( 39 mm) Roughing contour 3 (Hexagon 32 mm) Roughing circular pocket 18.16 mm Finishing contour 1 (50 x 50 mm) Finishing contour 2 ( 39 mm) Finishing contour 3 (Hexagon 32 mm) Finishing circular pocket 18.16 mm Chamfer contour 2 ( 39 mm) Chamfer contour 3 (Hexagon 32 mm) Chamfer circular pocket 18.16 mm Centering hole 1 - 4 Drilling hole 1 - 4 Tapping hole 1 - 4, M6 Thread milling, M20 x 1.5 mm

T1D1 T2D2 T2D2 T2D2 T2D2 T3D3 T3D3 T3D3 T3D3 T4D14 T4D4 T4D4 T7D7 T8D8 T9D9 T10D10

Start X-22 Y-25 Z5 2 passes, 5mm each 2 passes, 5mm each Depht 5mm 3 passes, 5.5mm each Depht 10mm Depht 10mm Depht 5mm Depht 16mm Depht 8.5mm Depht 0.5mm Depht 2.5mm Depht 11.92mm Depht 18mm Depht 18mm 11 passes, 1.5mm each

PC Mill 105
2

CNC-EXAMPLES
Demopart
Machine
PC MILL 105 / WinNC Material Code AlCuPbBi F38 Shortener Al Dimension 50x50x15 Note

Adjustment sheet

Rawmaterial
Aluminium

Type Machine vice

Workpiece zero point

Clamping device

G54 + G58 Order number F1Z 310

Shell end mill

Order No: 764 410 Shank end mill

Order No: 781 152

T1
Offset number: D1 Tool radius: 20 Tool offset: Spindle: 1300 rpm Feed: 350 mm/min

T2
Offset number: D2 Tool radius: 5,1 Tool offset: Spindle: 2300 rpm Feed: 450 mm/min

Milling arbor

Order No: F1Z 860 764 308

Mill arbor 10

Order No: F1Z 830

Slot end mill Order No:

Angle milling cutter Ord No: 771 050

T3 Tools
Offset number: D3 Tool radius: 5 Tool offset: Spindle: 4000 rpm Feed: 400 mm/min

T4
Offset number: D4 / D14 Tool radius: 5/7 Tool offset: Spindle: 4500 rpm Feed: 600 mm/min

Mill arbor 10

Order No: F1Z 830

Mill arbor 16

Order No: F1Z 850

T5
Offset number: Tool radius: Tool offset: Spindle: Feed:

T6
Offset number: Tool radius: Tool offset: Spindle: Feed:

PC Mill 105
3

CNC-EXAMPLES
Demopart
Machine
PC MILL 105 / WinNC Material Code AlCuPbBi F38 Shortener Al Dimension 50x50x15 Note

Adjustment sheet

Rawmaterial
Aluminium

Type Machine vice

Workpiece zero point

Clamping device

G54 + G58 Order number F1Z 310

NC-start-drill

Order No: 771 010


Offset number: D7 Tool radius: 5 Tool offset: Spindle: 2200 rpm Feed: 80 mm/min

Twist drill

Order No: 260 628


Offset number: D8 Tool radius: 2,5 Tool offset: Spindle: 2500 rpm Feed: 120 mm/min

T7

T8

Mill arbor 10 Screw tap M6

Order No: F1Z 830 Order No: 781 304


Offset number: D9 Tool radius: 3 Tool offset: Spindle: 600 rpm Feed: 600 mm/min

Collet holder

Order No: F1Z 910

Thread milling cutter

T9 Tools

T10
Offset number: D10 Tool radius: 8.55 Tool offset: Spindle: 2000 rpm Feed: 200 mm/min

Screw tap holder

Order No: F1Z 890

Mill arbor 16

Order No: F1Z 850

Offset number: Tool radius: Tool offset: Spindle: Feed:

Offset number: Tool radius: Tool offset: Spindle: Feed:

PC Mill 105
4

You might also like