Scribd
Upload
17 views

Lash Mi

This document describes two projects: 1. A password-based automatic door lock system that uses a microcontroller to open a door when the correct password code is entered. The system has timing controls for security. 2. A voice communication system that transmits audio signals through a laser beam, allowing for confidential communication without installing transmission cables. The laser converts electrical audio signals to light signals for transmission.

Uploaded by

Jaya Raja
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
17 views

Lash Mi

This document describes two projects: 1. A password-based automatic door lock system that uses a microcontroller to open a door when the correct password code is entered. The system has timing controls for security. 2. A voice communication system that transmits audio signals through a laser beam, allowing for confidential communication without installing transmission cables. The laser converts electrical audio signals to light signals for transmission.

Uploaded by

Jaya Raja
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

PASSWORD BASED AUTOMATIC DOOR LOCK SYSTEM

ABSTRACT

The project deals with the design of a security system especially meant of a RESTICTED DOORS. Because of the tremendous increase in the thefts we are in a position to safeguard them through some methods. Even the mechanical lock systems fail because they are easily breakable without making any huge noise. More over Now a days we need lot of security systems in all kinds area. The security system varies depends upon the application (password, finger and voice etc,) So we desire to do take password security system. The project has its own accuracy and has its timing control i.e. based on the different timing delays which we have implemented in the mono stable multi vibrator of the circuit. When the code is pressed the door will automatically open using the microcontroller.

VOICE COMMUNICATION THROUGH LASER


ABSTRACT

The aim of the project is to transmit the audio signals through optical media and to amplify the same thing with a powerful amplifier and to have confidential communication link. The equipment has been designed to operate in speech sending modes. The function fully depends on the conversion of audio into its corresponding electrical signal and then to convert it into light signals using laser. The laser we have used is of wavelength of 850 nm. The project is essential and becomes mandatory where a secret communication is required and where a separate transmission cable can not be installed.

You might also like