Object-Oriented Analysis and Design with UML

Training Course

Adegboyega Ojo Elsa Estevez

e-Macao Report 19 Version 1.0, October 2005

Table of Contents

Table of Contents 1. 2. 3. 4. 5. Overview...............................................................................................................1 Objectives .............................................................................................................1 Prerequisites..........................................................................................................2 Methodology ..........................................................................................................2 Content .................................................................................................................2 5.1. Introduction.....................................................................................................2 5.2. Object-Orientation............................................................................................2 5.3. UML Basics ......................................................................................................3 5.4. UML Modelling..................................................................................................3 5.4.1. Requirements ............................................................................................3 5.4.2. Architecture...............................................................................................3 5.4.3. Design ......................................................................................................3 5.4.4. Implementation .........................................................................................4 5.4.5. Deployment...............................................................................................4 5.5. Unified Process ................................................................................................4 5.6. Tools ..............................................................................................................4 5.7. Summary ........................................................................................................4 6. Assessment ...........................................................................................................4 7. Organization ..........................................................................................................4 References ................................................................................................................6 Appendix...................................................................................................................7 A. Slides ...................................................................................................................7 A.1. Introduction ....................................................................................................7 A.2. Object Orientation .......................................................................................... 12 A.2.1. Background ............................................................................................. 12 A.2.3. Concepts................................................................................................. 17 A.2.4. Object Oriented Analysis ........................................................................... 28 A.2.5. Object Oriented Design ............................................................................. 30 A.3. UML Basics .................................................................................................... 33 A.3.1. UML Background ...................................................................................... 33 A.3.2. UML Building Blocks ................................................................................. 36 A.3.3. Modelling Views ....................................................................................... 49 A.4. Requirements ................................................................................................ 53 A.4.1. Software Requirements............................................................................. 53 A.4.2. Use Case Modelling .................................................................................. 58 A.4.3. Conceptual Modelling................................................................................ 66 A.4.4. Behavioural Modelling............................................................................... 76 A.5. Architecture................................................................................................... 94 A.5.1. Software Architecture ............................................................................... 94 A.5.2. Collaboration Diagrams........................................................................... 100 A.5.3. Component Diagrams ............................................................................. 106 A.5.4. Packages .............................................................................................. 111 A.5.5. Frameworks and Patterns........................................................................ 115 A.6. Design ........................................................................................................ 123 A.6.1. Software Design..................................................................................... 123 A.6.2. Design Class Diagrams ........................................................................... 127 A.6.3. Activity Diagrams................................................................................... 134 A.6.4. Sequence Diagrams................................................................................ 141 A.6.5. Statechart Diagrams............................................................................... 146 A.6.6. Design Patterns ..................................................................................... 153

Table of Contents

ii

A.7. Implementation ........................................................................................... 159 A.8. Deployment................................................................................................. 163 A.9. Unified Process ............................................................................................ 167 A.10. UML Tools.................................................................................................. 174 A.11. Summary .................................................................................................. 178 B. Assessment ....................................................................................................... 186 B.1. Set 1 .......................................................................................................... 186 B.2. Set 2 .......................................................................................................... 189

Introduction

1. Overview The Unified Modelling Language (UML) is a graphical language for visualising, specifying, constructing, and documenting artefacts of software intensive systems [6]. UML represents the unification of a number of efforts to build notations for expressing models of Object Oriented Analysis and Design (OOAD) under the auspices of the Object Management Group (OMG). At present, UML is the de-facto standard for Object Oriented modelling. This document describes the course Object Oriented Analysis and Design with UML taught to the Core and Extended Teams in the context of the e-Macao Project. The course presents the method of Object Oriented Analysis and Design (OOAD) using the UML notation. Following the introduction of basic concepts and principles of object orientation, the course shows how informal requirements can be described in details. Considering four views of a typical system - user, static, dynamic and implementation, each of the nine UML diagrams are discussed extensively for modelling these views. For instance, the course describes: (i) use cases for modelling requirements, (ii) class and object diagrams for obtaining good understanding of an application domain and (iii) sequence, collaboration and statechart diagrams for analyzing requirements and specifying architectural and design decisions. In addition, the course teaches the best practices in OOAD based on architectural and design patterns and how UML can be used in the context of the Unified Process (UP). It concludes with a comparative analysis of some popular UML tools. The rest of this document is as follows. Sections 2, 3 and 4 explain respectively the objectives, prerequisites and methodology for teaching the course. The content of the course is introduced in Section 5. The assessment and organization of the course are explained in Sections 6 and 7. Following references, Appendix A includes the complete set of slides and Appendix B contains two sets of assessment questions with answers.

2. Objectives The objectives of the course are as follows: 1) Teaching the basic concepts and principles of Object Orientation including Object Oriented Analysis and Design. 2) Introducing the Syntax, Semantics and Pragmatics of the Unified Modeling Language. 3) Showing how requirements can be described informally and how they are modeled using Use Case Diagrams. 4) Teaching how the structural and behavioral aspects of a system can be analyzed, specified and designed using Class, Interaction and Statechart Diagrams. 5) Showing how implementation and deployment details of a system can be modeled using the Implementation and Deployment Diagrams respectively. 6) Teaching best practices in OOAD based on Architecture and Design patterns. 7) Introducing the Unified Process and showing how UML can be used within the process. 8) Presenting a comparison of the major UML tools for industrial-strength development.

Introduction

3. Prerequisites This course assumes that the learner possesses the basic knowledge of application development. No prior knowledge of Object Orientation is required.

4. Methodology The course has been designed based on the following didactic principles: Depth versus Breadth - As a foundation, an attempt has been made to cover the various aspects of UML as required in practical applications, without much loss of depth. Academic Orientation A body of concepts is defined rigorously and incrementally to establish a foundation for proper understanding and use of technology. From Definitions to Demonstrations All major concepts introduced during the course are illustrated with small-size examples which are also demonstrated on the computer, whenever possible. From Demonstrations to Assignments On the basis of demonstrations, students are asked to perform different tasks with increasing level of difficulty and independence. Generally, instructors are expected to administer the course material in a tutorial style. Unlike most courses or materials available on UML, this course teaches UML from an application perspective rather than the usual notation perspective.

5. Content The course is organized into six major sections: Object-Orientation, UML Basics, UML Modelling, Unified Process, UML Tools and Summary. The synopses for these sections are presented below. The course starts with an Introduction section, which describes the contents presented in subsequent sections, including the organizational aspect of the course. The course consists of 618 slides divided into six major sections: Introduction, Object Orientation, UML Basics, UML Modelling, Unified Process and UML Tools.

5.1. Introduction The Introduction section provides information on the aims of the course, the outline of each section, and the schedule for the course as delivered within the context of the e-Macao Project. This part is covered in the slides 1 through 16.

5.2. Object-Orientation This section is covered in the slides 17 through 83. It presents the background, principles and fundamental concepts of Object Orientation: Object, Class, Abstraction, Interface, Implementation, Aggregation, Composition, Generalization, Sub-Class and Polymorphism. The section concludes with the presentation of Object Oriented Analysis and Design.

Introduction

5.3. UML Basics The section provides a brief presentation of UML. It starts by explaining what modelling entails and why it is important for software and system engineering. Next, it outlines the basic building blocks of UML: Elements, Relationships and Diagrams. Finally, the section presents five basic modelling views supported by UML: Use Case, Design, Process, Implementation and Deployment. This section is covered in the slides 84 through 151.

5.4. UML Modelling The section constitutes the major part of the course. It presents the nine UML diagrams and how they are applied through the five modelling activities: Requirements, Architecture, Design, Implementation and Deployment. The following sections are devoted to each of these modelling activities.

5.4.1. Requirements This section teaches about requirements in general. It shows how requirements can be described informally and how they can be modelled as Use Cases. In addition, the section presents how the basic concepts and entities of an application domain can be described using Class and Object Diagrams. Furthermore it teaches how Interaction and Statechart Diagrams can be used to specify class and object interactions and their internal behaviours respectively. This Section is covered in the slides 152 through 299.

5.4.2. Architecture The section starts by introducing the various concepts related to Architectural Design: SubSystems, Services, Coupling, Cohesion and Layering. Next, it presents Collaborations and how they can be used to model the functional units of a system. Static and dynamic aspects of collaborations are covered as well. Collaboration Diagrams are presented as the major diagram for architecture modelling. Packages are introduced for organizing or modularizing the functional units of a system. The section ends with a discussion of the set of major architectural patterns: Repository, Model-View-Controller, Client-Server, Peer-to-Peer and Pipe-and-Filter. This section is presented in the slides 300 through 403.

5.4.3. Design The section, covered in the slides 404 through 526, starts with an introduction to System and Object Design activities. Next, it presents Design Classes as foundation of the whole development. The steps involved in building Design Class Diagrams are described, from reviewing conceptual classes, to decorating design class attributes with data types, to providing default values and constraints. Furthermore, Activity Diagrams are presented for describing business processes, procedures or algorithms. Sequence and Statechart Diagrams are revisited in the discussion of detailed design of both internal and external behaviours of system objects. The section is concluded with a discussion on Design Patterns.

Introduction

5.4.4. Implementation This section presents Components Diagrams and how they can be used to specify implementation artefacts: Source Code, Executable Releases and Physical Databases. Implementation modelling is covered in the slides 527 through 540.

5.4.5. Deployment This section teaches how Component Diagrams and Nodes can be used to describe the deployment environment of a system. Slides 541 to 554 contain this Section.

5.5. Unified Process The Unified Process (UP) is taught in this section as a process supporting Object Oriented Analysis and Design with UML. The section explains the details of the Unified Process: Core Workflows and Life Cycle Phases. Finally, it shows which UML models are relevant to specific Workflows and Phases of the UP. Slides 555 through 579 contain this Section.

5.6. Tools This section presents some of the tools for UML modelling: Enterprise Architect, Magic Draw, Poseidon and Rational Rose. The basic features of each tool are presented, as is the comparative analysis of the tools. This Section is presented in the slides 580 through 591.

5.7. Summary This section provides a summary of the entire course highlighting the major points in each of the sections. The summary section is given from the slide 592 to 618.

6. Assessment Assessment comprises 15 multiple-choice questions provided at the end of the course to test the students understanding of the various topics taught. Two sets of assessment questions are given in Appendices B.1 and B.2, with only slight differences between them. The assessment compliments the 55 tasks or assignments provided in the various sections.

7. Organization The course consists of lectures, demonstrations and assignments: lectures The lectures aim to incrementally build a body of concepts to establish the foundation for proper understanding and use of technology. demonstrations - Demonstrations illustrate the concepts introduced during the lectures with running code and small-size examples.

Introduction

assignments - During assignments, students are asked to perform a range of tasks with increasing level of difficulty and independence. They are encouraged to reuse the demonstrated code and examples in their assignments. The course is designed to be taught for about 42 hours. In the context of the e-Macao Core Team Training, the course was taught over seven days, as follows: (1) Introduction and Object Orientation and UML Basics (2) UML Basics and Requirements, (3) Requirements, (4) Architecture, (5) Design, (6) Implementation and Deployment, and (7) Unified Process, Tools and Summary. For e-Macao Extended Team Training, a shorter version of the same course was taught over four days: (1) Introduction, Object Orientation and UML Basics, (2) Requirements, (3) Architecture and Design, and (4) Design, Implementation, Deployment, Unified Process, UML Tools and Summary.

References

References 1) OMG Unified Modeling Language Specification, Object Management Group. 2) UML Bible, Tom Pender, John Wiley and Sons, 2003. 3) Object-Oriented Analysis and Design using UML, Simon Bennet, Steve McRobb and Ray Farmer, McGraw-Hill, 2002. 4) Guide to Applying the UML, Sinan Si Alhir, Springer, 2002. 5) Object-Oriented Software Engineering, Bernd Bruegge, Allen H Dutoit, Prentice Hall, 2000. 6) The Unified Modeling Language User Guide, Grady Booch, James Rumbaugh, Ivar Jacobson, Addison Wesley, 1999. 7) OO Software Development Using UML, UNU-IIST Tech Report 229.

Slides Introduction

Appendix A. Slides A.1. Introduction

e-Macao-18-1-2

The Course
objectives - what do we intend to achieve?

Object-Oriented Analysis and Design with UML

Adegboyega Ojo and Elsa Estevez UNU-IIST

outline - what content will be taught? resources - what teaching resources will be available? organization - duration, major activities, daily schedule

Slides Introduction
e-Macao-18-1-3 e-Macao-18-1-4

Course Objectives
1) present the concepts of Object Orientation, as well as Object Oriented Analysis (OOA) and Design (OOD) 2) introduce the syntax, semantics and pragmatics of UML, and how to integrate it with the Unified Process 3) show how to articulate requirements using use cases 4) present the development of structural and behavioural diagrams for different views supported by UML 5) introduce patterns and frameworks and their applications in architecture and design tasks 6) present a comparative analysis of the major UML tools suitable for industrial-strength development

Course Outline
1) Object Orientation 2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools
e-Macao-18-1-5

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment
e-Macao-18-1-6

Overview: Object Orientation

1) Background 2) Principles 3) Concepts 4) OO Analysis 5) OO Design

Overview: UML Basics

1) UML outline 2) UML building blocks a) elements b) relationships c) diagrams 3) modelling views

Slides Introduction
e-Macao-18-1-7 e-Macao-18-1-8

Overview: Requirements
1. software requirements 2. use case modelling a) use case diagrams b) templates 3. conceptual modelling a) class diagrams b) object diagrams 4. behavioural modelling a) sequence diagrams b) statechart diagrams
e-Macao-18-1-9

Overview: Architecture
1) software architecture 2) models a) collaboration diagrams b) component diagrams 3) frameworks and patterns

e-Macao-18-1-10

Overview: Design
1) software design 2) design models a) class diagrams b) sequence diagrams c) activity diagrams d) statechart diagrams 3) design patterns

Overview: Implementation
1) packages 2) components 3) component diagrams

Slides Introduction
e-Macao-18-1-11 e-Macao-18-1-12

10

Overview: Deployment
1) nodes and components 2) deployment diagrams 3) use of deployment diagrams

Overview: Unified Process

1) Unified Process 2) life cycle phases 3) workflows 4) workflows and UML diagrams

e-Macao-18-1-13

e-Macao-18-1-14

Overview: UML Tools

1) CASE tools 2) Selected UML tools: a) b) c) d) Magic Draw Enterprise Architect Poseidon Rational Rose

Course Resources
1) OMG Unified Modeling Language Specification, Object Management Group. 2) UML Bible, Tom Pender, John Wiley and Sons, 2003. 3) Object-Oriented Analysis and Design using UML, Simon Bennet, Steve McRobb and Ray Farmer, McGraw-Hill, 2002. 4) Guide to Applying the UML, Sinan Si Alhir, Springer, 2002. 5) Object-Oriented Software Engineering, Bernd Bruegge, Allen H Dutoit, Prentice Hall, 2000. 6) The Unified Modeling Language User Guide, Grady Booch, James Rumbaugh, Ivar Jacobson, Addison Wesley, 1999. 7) OO Software Development Using UML, UNU-IIST Tech Report 229. 8) Course materials

Slides Introduction
e-Macao-18-1-15 e-Macao-18-1-16

11

Course Organization
Monday to Thursday: 09:00 10:20 10:30 11:20 11:30 10:20 10:30 11:20 11:30 13:00 lecture/lab break lecture/lab break lecture/lab

Course Assessment
Thursday, 16:45 17:45 15 multiple-choice questions 30 minutes allowed maximum obtainable points 30 grades A B C D E points 26-30 21-25 16-20 11-15 00-10

13:00 14:30 lunch time 14:30 15:30 15:40 16:30 16:40 15:30 15:40 16:30 16:40 17:45 lecture/lab break lecture/lab break lecture/lab (except Thursday)

Slides Object Orientation

12

A.2. Object Orientation A.2.1. Background

e-Macao-18-1-18

Course Outline
1) Object Orientation 2) UML Basics

Object Orientation

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Object Orientation

13

e-Macao-18-1-19

e-Macao-18-1-20

Towards Object Orientation

Procedural Paradigm

What is Object Orientation?

Definition Object Orientation is about viewing and modelling the world/system as a set of interacting and interrelated objects.

Modular Paradigm

Features of the OO approach:

Data Abstraction Paradigm

1) the universe consists of interacting objects 2) describes and builds systems consisting of objects

Object Oriented Paradigm

Slides Object Orientation

14

A.2.2. Principles

e-Macao-18-1-21

e-Macao-18-1-22

OO Principles
1) abstraction 2) encapsulation 3) modularity 4) hierarchy

Principle 1: Abstraction
A process allowing to focus on most important aspects while ignoring less important details. Abstraction allows us to manage complexity by concentrating on essential aspects making an entity different from others.

Salesman Customer Product

An example of an order processing abstraction

Slides Object Orientation

e-Macao-18-1-23 e-Macao-18-1-24

15

Principle 2: Encapsulation
Encapsulation separates implementation from users/clients. A client depends on the interface.

Principle 3: Modularity
Modularity breaks up complex systems into small, selfcontained pieces that can be managed independently.

Order Entry Order Processing System Order Fulfillment Billing

Courtesy Rational Software

e-Macao-18-1-25

e-Macao-18-1-26

Principle 4: Hierarchy
Ordering of abstractions into a tree-like structure.

Task 1
Which of the following models A and B is more abstract? Justify your answer.

Increasing abstraction

Asset

Model A:
Citizen

Model B:
Citizen id number name address works for company X

Bank Account Security Real Estate

1) 2) 3) 4)

Savings

Checking Stock

Bond

Slides Object Orientation

e-Macao-18-1-27 e-Macao-18-1-28

16

Task 2
Provide an example of encapsulation: a) identify the interface b) identify the implementation Tip: interface: computer case implementation: computer mother board

Task 3
Suppose A and B are models of the same system. Which of them is more modular? Model A: Model B:

e-Macao-18-1-29

Task 4
Describe the structure of your agency as a hierarchy. Include at least three levels.

Slides Object Orientation

17

A.2.3. Concepts

e-Macao-18-1-30

e-Macao-18-1-31

OO Concepts
1. 2. 3. 4. 5. 6. 7. 8. 9. Object Class Attribute Operation Interface Implementation Association Aggregation Composition 10.Generalization 11.Super-Class 12.Sub-Class 13.Abstract Class 14.Concrete Class 15.Discriminator 16.Polymorphism 17.Realization

Concept 1: Objects
What is an object? 1) any abstraction that models a single thing 2) a representation of a specific entity in the real world 3) may be tangible (physical entity) or intangible Examples: specific citizen, agency, job, location, order, etc.

Slides Object Orientation

e-Macao-18-1-32 e-Macao-18-1-33

18

Examples of Objects

Object Definition
Two aspects: Information: 1) has a unique identity 2) has a description of its structure 3) has a state representing its current condition persons Behaviour: 1) what can an object do? 2) what can be done to it?

chairs

computer devices
e-Macao-18-1-34 e-Macao-18-1-35

Object Definition Example

1) information: a) serial number b) model c) speed d) memory e) status

Concept 2: Class
What is a class? 1) any uniquely identified abstraction of a set of logically related instances that share similar characteristics 2) rules that define objects 3) a definition or template that describes how to build an accurate representation of a specific type of objects Examples: agency, citizen, car, etc.

2) behaviour: a) print file b) stop printing c) empty the queue Objects are created using class definitions as templates.

Slides Object Orientation

e-Macao-18-1-36 e-Macao-18-1-37

19

Class Example
Printers information behaviour

Concept 3: Attribute
Definition Attribute is a named property of a class describing a range of values that instances of the class may hold for that property.

An attribute has a type and defines the type of its instances. Only the object is able to change the values of its own attributes. The set of attribute values defines the state of the object.

e-Macao-18-1-38

e-Macao-18-1-39

Attribute Examples
object class attribute
Printer
serialNumber memory status

Concept 4: Operation
:Printer

attribute value

Definition Operation is the implementation of a service that can be requested from any object of a given class. An operation could be: 1. a question - does not change the values of the attributes

serialNumber=125t memory=128Mb status=idle

:Printer
serialNumber=067l memory=256Mb status=busy

2. a command may change the values of the attributes

Slides Object Orientation

e-Macao-18-1-40 e-Macao-18-1-41

20

Operation Example
class operation
Printer
printFile stopPrinting removeFileInQueue

Task 5
Which of the following statements are true? For those that are false, explain why. 1) Trainee is an example of a class. 2) Dora Cheong is an example of a class. 3) createJob is an example of an object. 4) deleteFile is an example of an operation 5) name is an attribute

e-Macao-18-1-42

e-Macao-18-1-43

Task 6
Suppose we wish to model an application for issuing business registration licenses. Identify: 1) three classes for the model 2) at least three attributes for each class

Applying Abstraction
Abstraction in Object Orientation: 1) use of objects and classes to represent reality 2) software manages abstractions based on the changes occurring to the real-world objects

Courtesy: XML Bible

Slides Object Orientation

e-Macao-18-1-44 e-Macao-18-1-45

21

Concept 5: Interface
1) minimum information required to use an object 2) allows users to access the objects knowledge 3) must be exposed 4) provides no direct access to object internals

Interface Example

e-Macao-18-1-46

e-Macao-18-1-47

Concept 6: Implementation
1) information required to make an object work properly 2) a combination of the behaviour and the resources required to satisfy the goal of the behaviour 3) ensures the integrity of the information upon which the behaviour depends

Implementation Example

Slides Object Orientation

e-Macao-18-1-48 e-Macao-18-1-50

22

Relations and Links

Relationships: between classes (relations) between objects (links) Three kinds of relations between classes: 1) association 2) aggregation 3) composition

Concept 7: Association
1. the simplest form of relation between classes 2. peer-to-peer relations 3. one object is aware of the existence of another object 4. implemented in objects as references

e-Macao-18-1-51

e-Macao-18-1-52

Association Examples
Associations between classes A and B: 1) A is a physical or logical part of B 2) A is a kind of B 3) A is contained in B 4) A is a description of B 5) A is a member of B 6) A is an organization subunit of B 7) A uses or manages B 8) A communicates with B 9) A follows B 10)A is owned by B

Concept 8: Aggregation
1. a restrictive form of part-of association 2. objects are assembled to create a more complex object 3. assembly may be physical or logical 4. defines a single point of control for participating objects 5. the aggregate object coordinates its parts

Slides Object Orientation

e-Macao-18-1-53 e-Macao-18-1-54

23

Aggregation Example

Concept 9: Composition
1. a stricter form of aggregation 2. lifespan of individual objects depend on the on lifespan of the aggregate object 3. parts cannot exist on their own 4. there is a create-delete dependency of the parts to the whole

A CPU is part of a computer. CPU, devices, monitor and keyboard are assembled to create a computer.

e-Macao-18-1-55

e-Macao-18-1-56

Composition Example

Task 7
Identify which of the following statements are true. For those that are false, explain why. 1) there is an association between Trainee and Course 2) there is a composition between Course and Professor

A word cannot exist if it is not part of a line. If a paragraph is removed, all lines of the paragraph are removed, and all words belonging to that lines are removed.

3) there is an aggregation between Course and Venue

Slides Object Orientation

e-Macao-18-1-58 e-Macao-18-1-59

24

Concept 10: Generalization

1) a process of organizing the features of different kinds of objects that share the same purpose 2) equivalent to kind-of or type-of relationship 3) generalization enables inheritance 4) specialization is the opposite of generalization 5) not an association

Generalization Example

Common features are defined in User. FrontOfficeEmployee and BackOfficeEmployee inherit them.

e-Macao-18-1-60

e-Macao-18-1-61

Concept 11: Super-Class

Definition Super-Class is a class that contains the features common to two or more classes. A super-class is similar to a superset, e.g. agency-staff.

Concept 12: Sub-Class

Definition Sub-Class is a class that contains at least the features of its super-class(es). A class may be a sub-class and a super-class at the same time, e.g. management-staff.

Slides Object Orientation

e-Macao-18-1-62 e-Macao-18-1-63

25

Super/Sub-Class Example

Concept 13: Abstract Class

1. a class that lacks a complete implementation - provides operations without implementing some methods

Person

super-class

2. cannot be used to create objects; cannot be instantiated 3. a concrete sub-class must provide methods for unimplemented operations

Teacher

Student

Doctor

sub-classes

e-Macao-18-1-64

e-Macao-18-1-65

Concept 14: Concrete Class

1. has methods for all operations 2. can be instantiated 3. methods may be: a) defined in the class or b) inherited from a super-class

Concept 15: Discriminator

Discriminator an attribute that defines sub-classes Example: status of agency staff is a possible discriminator to derive management, senior and junior sub-classes.

Slides Object Orientation

e-Macao-18-1-66 e-Macao-18-1-67

26

Task 9
Suppose we wish to model an e-service application for a government agency. Does this diagram reasonably model the relationship between the entities User, Employee, FrontOffice Employee, Back-Office Employee and Applicant? If not, provide a more appropriate model.

Task 10
Add a generalization for the classes defined in Task 6. Identify the super-class and one sub-class. Do you have any abstract class? Justify. Which discriminator is used in your generalization hierarchy?

e-Macao-18-1-68

e-Macao-18-1-69

Concept 16: Polymorphism

1. ability to dynamically choose the method for an operation at run-time or service-time 2. facilitated by encapsulation and generalization: a) encapsulation separation of interface from implementation a) generalization organizing information such that the shared features reside in one class and unique features in another 3. Operations could be defined and implemented in the superclass, but re-implemented methods are in unique sub-classes.

Polymorphism Example
Many ways of doing the same thing! Example: management-staff and agency-staff can apply for leave, but possibly in different ways.

Slides Object Orientation

e-Macao-18-1-70 e-Macao-18-1-71

27

Task 11
Consider the generalization hierarchy provided in Task 10. Introduce an operation for the super-class which could be implemented in different ways by its sub-classes. Provide an example of polymorphism. Explain.

Concept 17: Realization

1. allows a class to inherit from an interface class without being a sub-class of the interface class 2. only inherits operations 3. cannot inherit methods, attributes or associations

e-Macao-18-1-72

Task 12
Using realization model the fact that vehicles and aircrafts must be to accelerate, decelerate, brake and park.

Slides Object Orientation

28

A.2.4. Object Oriented Analysis

e-Macao-18-1-73

e-Macao-18-1-74

OO Analysis and Design

A methodology for system/software modelling and design using Object-Oriented concepts. Consists of two parts:

Object Oriented Analysis

1) a discovery process 2) clarifies and documents the requirements of a system 3) focuses on understanding the problem domain

1) Object Oriented Analysis 4) discovers and documents the key problem domain classes 2) Object Oriented Design 5) concerned with developing an object-oriented model of the problem domain 6) identified objects reflect the entities that are associated with the problem to be solved

Slides Object Orientation

e-Macao-18-1-75 e-Macao-18-1-76

29

OOA Definition
Definition Object Oriented Analysis (OOA) is concerned with developing requirements and specifications expressed as an object model (population of interacting objects) of a system, as opposed to the traditional data or functional views. [Software Engineering Institute]

Benefits
1) maintainability: simplified mapping to the real world a) less analysis effort b) less complexity in system design c) easier verification by the user 2) reusability: reuse of the artifacts that are independent of the analysis method or programming language 3) productivity: direct mapping to the features implemented in Object Oriented Programming Languages

Slides Object Orientation

30

A.2.5. Object Oriented Design

e-Macao-18-1-77

e-Macao-18-1-78

Object Oriented Design

process of invention and adaptation creates abstractions and mechanisms necessary to meet behavioural requirements determined during analysis language-independent

OOD Design
Definition [SEI] Object Oriented Design (OOD) is concerned with developing object-oriented models of a software/system to implement the requirements identified during OOA.

The same set of benefits as those in OOA. provides an object-oriented model of a software system to implement the identified requirements

Slides Object Orientation

e-Macao-18-1-79 e-Macao-18-1-80

31

OOD Process
Stages in OOD: 1) 2) 3) 4) 5) define the context and modes of use of the system design the system architecture identify the principal objects in the system develop design models specify object interfaces

Task 13
List two basic differences between traditional systems analysis and object-oriented analysis.

Notes on the OOD activities: 1) activities are not strictly linear but interleaved 2) back-tracking may be done a number of times due to refinement or availability of more information

e-Macao-18-1-81

e-Macao-18-1-82

Summary 1
Object is any abstraction that models a single thing in a universe with some defined properties and behaviour. A class is any uniquely identified abstraction of a set of logically related objects that share similar characteristics. Classes may be related by three types of relations: 1) association 2) aggregation 3) composition

Summary 2
Object Orientation is characterized by: 1) encapsulation combination of data and behaviour, separation of an interface from implementation 2) inheritance generalization and specialization of classes, forms of hierarchy 3) polymorphism different implementations for the shared operations depending on the position of the involving object in the inheritance hierarchy.

Slides Object Orientation

e-Macao-18-1-83

32

Summary 3
Object Oriented Analysis is concerned with specifying system requirements and analysing the application domain. Object Oriented Design is concerned with implementing the requirements identified during OOA in the application domain.

Appendix A: Slides UML Basics

33

A.3. UML Basics A.3.1. UML Background

e-Macao-18-1-85

Course Outline
1) Object Orientation 2) UML Basics

UML Basics

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides UML Basics

e-Macao-18-1-86 e-Macao-18-1-87

34

What Is Modelling?
Modelling involves: 1) representation or simplification of reality 2) providing a blueprint of a system

Why Model?
1) better understand the system we are developing 2) describe the structure or behaviour of the system 3) experiment by exploring multiple solutions 4) furnish abstraction for managing complexity 5) document the design decisions 6) visualize the system as-is and to-be 7) provide a template for constructing a system

e-Macao-18-1-88

e-Macao-18-1-89

Modelling Principles
1) the choice of models affects how a problem is tackled 2) every model may be expressed at different levels of abstraction 3) effective models are connected to reality 4) no single model is sufficient to describe non-trivial systems

What is UML?
UML = Unified Modelling Language A language for visualizing, specifying, constructing and documenting artifacts of software-intensive systems. Examples of artifacts: requirements, architecture, design, source code, test cases, prototypes, etc. UML is suitable for modelling various kinds of systems: 1. enterprise information systems, 2. distributed web-based, 3. real-time embedded system, etc.

Slides UML Basics

e-Macao-18-1-90 e-Macao-18-1-90

35

UML Specification Language

Provides views for development and deployment. UML is process-independent. UML is recommended for use with the processes that are: 1) 2) 3) 4) use-case driven architecture-centric iterative incremental

UML Specification Language

Provides views for development and deployment. UML is process-independent. UML is recommended for use with the processes that are: 1) 2) 3) 4) use-case driven architecture-centric iterative incremental

e-Macao-18-1-91

e-Macao-18-1-92

Goals of UML
1) provide modelers with an expressive, visual modelling language to develop and exchange meaningful models 2) provide extensibility and specialization mechanisms to extend core concepts 3) support specifications that are independent of particular programming languages and development processes 4) provide a basis for understanding specification languages 5) encourage the growth of the object tools market 6) supports higher level of development with concepts such as components frameworks or patterns

History of UML
1) started as a unification of the Booch and Rumbaugh methods - Unified Method v. 0.8 (1995) 2) Jacobson contributes to produce UML 0.9, 1996 3) UML Partners work with three Amigos to propose UML as a standard modelling language to OMG in 1996. 4) UML partners tender their proposal (UML 1.0) to OMG in 1997, and 9 months later submit final UML 1.1. 5) Minor revision is UML 1.4 adopted in May 2001, and the most recent revision is UML 1.5, March 2003. 6) UML 2.0 released by the end 2004.

Slides UML Basics

36

A.3.2. UML Building Blocks

e-Macao-18-1-93

e-Macao-18-1-94

UML Building Blocks

Three basic building blocks: 1) elements: main citizens of the model 2) relationships: relationships that tie elements together 3) diagrams: mechanisms to group interesting collections of elements and relationships They will be used to represent complex structures.

Elements
Four basic types of elements: 1) 2) 3) 4) structural behavioural grouping annotation

They will be used to specify well-formed models.

Slides UML Basics

e-Macao-18-1-95 e-Macao-18-1-96

37

Structural Elements
a) static part of the model to represent conceptual elements b) nouns of the model

Element 1: Class
1) description of a set of objects that share the same attributes, operations, relationships and semantics 2) implements one or more interfaces

c) seven kinds of structural elements: 1) 2) 3) 4) 5) 6) 7) class interface collaboration use case active class component node 3) graphically rendered as a rectangle usually including a name, attributes and operations 4) can be also used to represent actors, signals and utilities

e-Macao-18-1-97

e-Macao-18-1-98

Element 2: Interface
1) collection of operations that specifies a service of a class 2) describes the externally visible behaviour, partial or complete, of a class 3) defines a set of operation signatures but not their implementations 4) rendered as a circle with a name

Element 3: Collaboration
1) defines an interaction between elements 2) several elements cooperating to deliver a behaviour, rather than individual behaviour 3) includes structural and behavioural dimensions 4) represents implementations of patterns of cooperation that make up a system 5) represented as a named ellipse drawn with a dashed line

Slides UML Basics

e-Macao-18-1-99 e-Macao-18-1-100

38

Element 4: Use Case

1) description of a sequence of actions that a system performs to deliver an observable result to a particular actor 2) used to structure the behavioural elements in a model 3) realized by collaboration

Element 5: Active Class

1) a class whose objects own one or more processes or threads and therefore can initiate an action 2) a class whose objects have concurrent behaviour with other objects 3) it also can be used to represent processes and threads

4) graphically rendered as an ellipse drawn with a solid line

4) graphically, an active class is rendered just like a class drawn with a thick line

e-Macao-18-1-101

e-Macao-18-1-102

Element 6: Component
1) physical, replaceable part of a system that conforms to and provides the realization of a set of interfaces 2) represents deployment components such as COM+ or Java Beans components 3) represents a physical packaging of logical elements such as classes, interfaces and collaborations

Element 7: Node
1) a physical element, exists at run time 2) represents a computational resource with memory and processing capacity 3) a set of components may reside in a node 4) components may also migrate from one node to another 5) graphically modelled as a cube

4) it can also be used to represent applications, files, libraries, pages and tables

Slides UML Basics

e-Macao-18-1-103 e-Macao-18-1-104

39

Behavioural Elements
a) represent behaviour over time and space b) verbs of the model

Element 8: Interaction
1) a set of messages exchanged among a set of objects within a particular context to accomplish a specific goal 2) specifies the behaviour of a set of objects

c) two kinds of behavioural elements: 8) interaction 9) state machine 3) involves a number of other elements: messages action sequences (behaviour invoked by a message) links (connection between objects) 4) graphically rendered as an arrow
saveapplication()

e-Macao-18-1-105

e-Macao-18-1-106

Element 9: State Machine

1) a sequence of states an object or interaction goes through during its lifetime, and its response to external events 2) may specify the behaviour of an individual class or a collaboration of classes 3) includes a number of elements: states, transition, events and activities 4) presented as a rounded rectangle with a name and sub-states

Element 10: Package

Grouping element of UML: organizes diagrams primary kind of grouping and decomposition conceptual, only available at development time graphically represented as a tabbed folder

Interactions and state machines are associated with structural elements such as classes, collaborations and objects.

Slides UML Basics

e-Macao-18-1-107 e-Macao-18-1-108

40

Element 11: Note

Annotation element: comments added to models for better explanation or illumination on specific elements used primarily for annotation e.g. rendering constraints and comments attached to elements or collections of elements presented as a rectangle with a dog-eared corner may include both textual and graphical comments

Task 14
Identify the UML element which best models each of the following entities: 1) Jackie Chan 2) a set of operations for validating dates 3) a module capable of validating dates based on the operations in 2 4) a set of trainees 5) withdraw money request from an ATM system 6) a computer server that hosts the payroll system

e-Macao-18-1-109

e-Macao-18-1-110

Relationships
Four basic types of relationships: 1) 2) 3) 4) dependency associations generalization realization

Relationship 1: Dependency
A semantic relationship between two elements in which a change to one element (independent element) may affect the meaning of another (dependent element). Given as a directed dashed line possibly with a label:

Meanings are consistent with the basic Object Oriented relationship types described earlier.

dependent element

independent element

Slides UML Basics

e-Macao-18-1-111 e-Macao-18-1-112

41

Relationship 2: Association
1) a structural relationship describing a set of links 2) links are connections between objects

Relationship 3: Generalization
1) a relationship in which objects of a specialized element (child) are substitutable for objects of a generalized element (parent) 2) child elements share the structure/behaviour of the parent

3) aggregation is a special type of association depicting the whole-part relationship 4) association is presented as a solid line, possibly directed, labelled and with adornments (multiplicity and role names)

3) rendered graphically as a solid line with hollow arrowhead pointing to the parent

generalized

specialized

e-Macao-18-1-113

e-Macao-18-1-114

Relationship 4: Realization
1) a semantic relationship between elements, wherein one element specifies a contract and another guarantees to carry out this contract 2) relevant in two basic scenarios: a) interfaces versus realizing classes/components b) uses cases versus realizing collaborations 3) graphically depicted as a dashed arrow with hollow head, a cross between dependency and generalization

Variants of Relationships
Variations of these four relationship types include: 1) refinement 2) trace 3) include 4) extend

contract

implementation

Slides UML Basics

e-Macao-18-1-115 e-Macao-18-1-116

42

Task 15
Define the relationship type which best relates the following classes: 1) 2) 3) 4) Employee Administrative officers Employee Office Application Software Operating system PC - Device

Diagrams
A diagram is a graph presentation of a set of elements and relationships where: a) nodes are elements b) edges are relationships Can visualize a system from various perspective, thus is a projection of a system.

e-Macao-18-1-117

e-Macao-18-1-118

Diagram Types
UML is characterized by nine major diagrams: 1) 2) 3) 4) 5) 6) 7) 8) 9) class object use case sequence collaboration statechart activity component deployment

Diagram 1: Class
Class Diagrams: 1) show a set of classes, interfaces and collaborations, and their relationships 2) address static design view of a system

Slides UML Basics

e-Macao-18-1-119 e-Macao-18-1-120

43

Class Diagram Example

Diagram 2: Object
Object Diagrams: 1) show a set of objects and their relationships 2) static snapshots of element instances found in class diagrams

e-Macao-18-1-121

e-Macao-18-1-122

Object Diagram Example

Diagram 3: Use Case

1) shows a set of actors and use cases, and their relationships 2) addresses static use case view of the system 3) is important for organizing and modelling the external behaviour of the system

Slides UML Basics

e-Macao-18-1-123 e-Macao-18-1-124

44

Use Case Diagram Example

Diagram 4: Sequence
Sequence Diagrams: 1) shows interactions consisting of a set of objects and the messages sent and received by those objects 2) addresses the dynamic behaviour of a system with special emphasis on the chronological ordering of messages

Authority

e-Macao-18-1-125

e-Macao-18-1-126

Sequence Diagram Example

Diagram 5: Collaboration
Collaboration Diagram: 1) shows the structural organization of objects that send and receive messages

Sequence and collaboration diagrams: are jointly called interaction diagrams can be transformed one into another

Slides UML Basics

e-Macao-18-1-127 e-Macao-18-1-128

45

Collaboration Diagram Example

Diagram 6: Statechart
1) shows a state machine consisting of states, transitions, events, and activities 2) addresses the dynamic view of a system 3) is important in modelling the behaviour of an interface, class or collaboration 4) emphasizes the event-driven ordering

e-Macao-18-1-129

e-Macao-18-1-130

Statechart Diagram Example

Diagram 7: Activity
1) shows control/data flows from one activity to another 2) addresses the dynamic view of a system, useful for modelling its functions 3) emphasizes the flow of control among objects

Slides UML Basics

e-Macao-18-1-130 e-Macao-18-1-131

46

Diagram 7: Activity
1) shows control/data flows from one activity to another 2) addresses the dynamic view of a system, useful for modelling its functions 3) emphasizes the flow of control among objects

Activity Diagram Example

e-Macao-18-1-132

e-Macao-18-1-133

Diagram 8: Component
1) shows the organization and dependencies amongst a set of components 2) addresses static implementation view of a system 3) shows how components map to one or more classes, interfaces and collaborations

Component Diagram Example

Slides UML Basics

e-Macao-18-1-134 e-Macao-18-1-135

47

Diagram 9: Deployment
1) shows configuration of run-time processing nodes and the components hosted on them 2) addresses the static deployment view of an architecture 3) is related to component diagram with nodes hosting one or more components

Deployment Diagram Example

e-Macao-18-1-136

e-Macao-18-1-137

Task 16
Consider a software process consisting of the following activities: requirement gathering, object oriented analysis, object design, implementation and deployment. List the diagrams that are essential for each of these activities. Provide justifications for your choice of diagrams.

Task 17
Select the best answer: The class diagram: a) is the first model created in the project b) is created after the other models c) is used to specify objects and generate code d) is used to create the sequence and the collaboration diagrams.

Slides UML Basics

e-Macao-18-1-138 e-Macao-18-1-139

48

Task 18
Select the best answer: The sequence diagram models: a) the sequence of activities to implement the model b) the way that objects communicate c) the relationships among objects d) the order in which the class diagram is constructed

Task 19
Select the best answer: The collaboration diagram: a) is a unique view of object behaviour b) models the connections between different views c) models the relationships between software and hardware components d) models the way objects communicate

Slides UML Basics

49

A.3.3. Modelling Views

e-Macao-18-1-140

e-Macao-18-1-141

Modelling Views
Modelling views different perspectives on the system: Use Case View Design View Process View Implementation View Deployment View

View 1: Use Case

Use Case View describes the behaviour of the system as seen by its end users, analysts and testers. This view shapes the system architecture.

A view is essentially a set of diagrams.

Slides UML Basics

e-Macao-18-1-142 e-Macao-18-1-143

50

View 2: Design
Design View encompasses: 1) classes, 2) interfaces and 3) collaborations that form the vocabulary of the problem and its solution.

View 3: Process
Process View encompasses threads and processes that form the systems concurrency and synchronization mechanisms. This view addresses: 1) performance, 2) scalability and 3) throughput of the system.

e-Macao-18-1-144

e-Macao-18-1-145

View 4: Implementation
Implementation View encompasses the components and files that are used to assemble and release the physical system. This view addresses the configuration management of the systems releases.

View 5: Deployment
Deployment View encompasses the nodes that form the systems hardware topology on which the system executes.

Slides UML Basics

e-Macao-18-1-146 e-Macao-18-1-147

51

Selecting Views
Different modelling views for different system types: 1) monolithic systems 2) distributed systems 3) etc.

Monolithic Systems
Two views are relevant: 1) Use case View: use case diagrams 2) Design View: a) class diagrams (structural modelling) b) interaction diagrams (behavioural modelling) 3) Process View: none 4) Implementation View: none 5) Deployment View: none

e-Macao-18-1-148

e-Macao-18-1-149

Distributed Systems
All five views are relevant: 1) Use case View: a) use case diagrams b) activity diagrams 2) Design View: a) class diagrams b) interaction diagrams c) statechart diagram 3) Process View: a) class diagram b) interaction diagrams 4) Implementation View: component diagrams 5) Deployment View: deployment diagrams

Summary 1
A model provides a blueprint of a system. UML is a language for visualizing, specifying, constructing and documenting artifacts of software-intensive systems. UML is process-independent but recommended for use with processes that are: use case driven, architecture-centric, iterative and incremental.

Slides UML Basics

e-Macao-18-1-150 e-Macao-18-1-151

52

Summary 2
There are three building blocks which characterize UML: elements, relationships and diagrams. Categories of elements in UML include: 1. structural 2. behavioural 3. grouping 4. annotation There are four basic types of relationships in UML: 1. dependency 2. association 3. generalization 4. realization

Summary 3
UML provides 9 diagrams for modelling: 1. 2. 3. 4. 5. 6. 7. 8. 9. class diagrams object diagrams use case diagrams sequence diagrams collaboration diagrams statechart diagrams activity diagrams component diagrams deployment diagrams

There are five different modelling views in UML: use case, design, process, implementation and deployment.

Slides Requirements

53

A.4. Requirements A.4.1. Software Requirements

e-Macao-18-1-153

Course Outline
1) Object Orientation 2) UML Basics

Requirements Modelling

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Requirements
e-Macao-18-1-154 e-Macao-18-1-155

54

Requirements
Definition A requirement is: 1) a function that a system must perform 2) a desired characteristic of a system 3) a statement about the proposed system that all stakeholders agree that must be true in order for the customers problem to be adequately solved.

Requirements Process
Typically includes: 1) elicitation of requirements 2) modelling and analysis of requirements 3) specification of requirements 4) validation of requirements 5) requirements management The process is not linear!

e-Macao-18-1-156

e-Macao-18-1-157

Functional or Non-Functional?
Functional requirements: 1) describe interaction between a system and its environment 2) describe how a system should behave under certain stimuli Non-functional requirements: 1) describe restrictions on a system that limit the choices for its construction as a solution to a given problem

Requirements Types
1) 2) 3) 4) 5) 6) 7) 8) 9) functional interface data human engineering qualification operational design constraints safety security, etc.

Slides Requirements
e-Macao-18-1-158 e-Macao-18-1-159

55

Requirements Specification
Requirements must be expressed precisely. Requirements specification should be: 1) 2) 3) 4) 5) 6) correct consistent feasible verifiable complete traceable

Requirements Standards
Various standards are available: 1) 2) 3) 4) 5) IEEE P1233/D3 Guide IEEE Std. 1233 Guide IEEE Std. 830-1998 ISO/IEC 12119-1994 IEEE std 1362-1998 (ConOps)

e-Macao-18-1-159

e-Macao-18-1-160

Requirements Standards
Various standards are available: 1) 2) 3) 4) 5) IEEE P1233/D3 Guide IEEE Std. 1233 Guide IEEE Std. 830-1998 ISO/IEC 12119-1994 IEEE std 1362-1998 (ConOps)

Requirements Template
req. id category description F44 Functional The applicants of social benefits, processing staff and approving authority shall be able to register in the system. Registration shall involve creating an account for the user for the purpose of authentication and personalisation of the system services. The agency staff users will be created by the system administrator. Applicants can register themselves by an option provided on the website. Account, Applicant, Authentication, Registration, User Registration is essential for subsequent authentication and personalisation functions. High F43

terms justification priority dependencies documents feasibility argument verification method

There are mature solutions (e.g. directory services) for implementing the requirement. When the system registers a new applicant who does not have an account, an account for the user is created by the system.

Slides Requirements
e-Macao-18-1-161 e-Macao-18-1-162

56

Task 20
1) Enumerate three functional requirements for the application issuing business registration licenses. 2) Enumerate two non-functional requirements for the same application. 3) Using the template provided earlier specify one of the functional requirements described in the first point.

Glossary 1
1) a set of terms that are defined and understood to form the basis for communication 2) a dictionary to carry out modelling 3) its purpose is to clarify the meaning of terms or to have the shared understanding of the terms amongst team members 4) is created during requirements definition, use case identification and conceptual modelling 5) is maintained throughout development

e-Macao-18-1-163

e-Macao-18-1-164

Glossary 2
It is usually the central place for: 1) 2) 3) 4) 5) definitions of key concepts clarification of ambiguous terms and concepts explanations of jargons description of business events description of software actions

Glossary Example
Id 1 2 Term Agency Authentication Definition A government organization providing services to citizens, businesses and other government agencies. Proving a users identity. To be able to access a Website or resource, a user must provide authentication via a password or some combination of tokens, biometrics and passwords. The act of granting approval. Authorization to resources or information within an application can be based on simple or complex access control methods. A process of arranging a date and time when a citizen can visit a social welfare centre. A message created by an agency that contains information about the social benefit service they want to post for advertisement. A place on a computer system where citizens can read messages. All agencies can add their own messages.

Authorization

There is no specific format for glossaries: 1) 2) 3) 4) reference identification for terms definitions categories cross references

4 5 6

Booking Bulletin Bulletin Board

Slides Requirements
e-Macao-18-1-165

57

Task 21
Define a glossary containing two definitions for the business license issuing application.

Slides Requirements

58

A.4.2. Use Case Modelling

e-Macao-18-1-167

Course Outline
1) Object Orientation

Requirements Modelling
Use Case Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Requirements
e-Macao-18-1-168 e-Macao-18-1-169

59

Use Cases
1) describe or capture functional requirements 2) represent the desired behaviour of the system 3) identify users (actors) of the system and associated processes 4) are the basic building blocks of use case diagrams 5) tie requirements phase to other development phases

Use Case Definition 1

A use case: 1. is a collection of task-related activities describing a discrete chunk of a system 2. describes a set of actions sequences that a system performs to present an observable result to an actor 3. describes a system from an external usage viewpoint

e-Macao-18-1-170

e-Macao-18-1-171

Use Case Definition 2

Key attributes of a use case: 1) 2) 3) 4) description action sequence includes variants produces observable results

Use Case Examples

A use case does not describe: 1) user interfaces 2) performance goals 3) non-functional requirements

Slides Requirements
e-Macao-18-1-172 e-Macao-18-1-173

60

Use Case Relationships

Use cases are organized by relationships. Three kinds: 1. generalization 2. include 3. extend

Relationship 1: Generalization
Generalization of use cases: the same meaning as before a more specialized use case is related to a more general use case

e-Macao-18-1-174

e-Macao-18-1-175

Generalization Example

Relationship 2: Include
Include relationship between use cases: the base use case explicitly incorporates the behaviour of another use case at a location specified in the base the include relationship never stands alone, but is instantiated as part of some larger base of use cases rendered using the include stereotype

Slides Requirements
e-Macao-18-1-176 e-Macao-18-1-177

61

Include Example

Relationship 3: Extend
Extend relationship between use cases: a) the base use case implicitly incorporates the behaviour of another use case at a location specified by the extending use case (extension point) b) the base use case may stand alone and usually executes without regards to extension points c) depending on the system behaviour, the extension use case will be executed or not d) rendered using the extend stereotype

e-Macao-18-1-178

e-Macao-18-1-179

Extend Example

Actor
Definition Actor is anyone or anything that interacts with the system causing it to respond to events.

An actor: 1) is something or somebody that stimulates the system to react or respond to its request 2) is something we do not have control over 3) represents a coherent set of roles that the external entities to the system can play 4) represents any type of a systems user

Slides Requirements
e-Macao-18-1-180 e-Macao-18-1-181

62

Actor Examples

Notes about Actors

1) actors stimulate a system providing input events and/or receive something output from the system 2) actors communicate with a system by sending and receiving messages to/from it, while performing use cases 3) actors model anything that needs to interact with the system to exchange information human users, computer systems and others 4) a user may act as one or several actors as it interacts with the system, while several individual users may act as different instances of one and the same actor

e-Macao-18-1-182

e-Macao-18-1-183

Relationship between Actors

It is also possible to relate actors using generalizations.

Types of Actors
Initiator versus participant: When there is more than one actor in a use case, the one that generates the stimulus is called the initiator and the others are participants. Primary versus secondary: The actor that directly interacts with the system is called the primary actor, others are called secondary actors.

Slides Requirements
e-Macao-18-1-184 e-Macao-18-1-185

63

Task 22
Based on the application for issuing business registration licenses define three use cases using a UML tool. Define a use case that extends one of the former use cases.

Task 23
Select the best answer: An actor is: a) a person

Define a use case that can be included in one of the former use cases.

b) a job title c) a role d) a system

e-Macao-18-1-186

e-Macao-18-1-187

Task 24
Add actors to the diagram produced in the previous Task. For each of the use cases in the previous task, enumerate all actors involved and indicate who is the initiator.

Use Case Diagrams

1) a diagram that shows a set of use cases and actors, and their relationships 2) is central to modelling the functions of the system 3) is used to visualize the functions of a system, so that: a) users can comprehend how to use the system and b) developers can understand how to implement it 4) puts everything together

Slides Requirements
e-Macao-18-1-188 e-Macao-18-1-189

64

Use Case Diagram Parts

A use case diagram commonly contains: 1) use cases 2) actors 3) relationships: a) dependency - between use cases b) generalization - between use cases or actors c) association - between use cases and actors

Identifying Use Cases

Use cases describe: 1. the functions that the user wants a system to accomplish 2. the operations that create, read, update, delete information 3. how actors are notified of the changes to the internal state and how they notify the system about external events

e-Macao-18-1-190

e-Macao-18-1-191

Identifying Actors
To determine who are the actors, we try to answer the following questions: 1) 2) 3) 4) who who who who uses the system? gets information from the system? provides information to the system? installs, starts up or maintains the system?

Naming Use Cases

Use concrete verb-noun phrases: 1) a weak verb may indicate uncertainty, a strong verb may clearly identify the action taken: a) strong verbs: create, calculate, migrate, activate, etc. b) weak verbs: make, report, use, organize, record, etc. 2) a weak noun may refer to several objects, a strong noun clearly identifies only one object a) strong nouns: property, payment, transcript, etc. b) weak nouns: data, paper, report, system, etc.

Slides Requirements
e-Macao-18-1-192 e-Macao-18-1-193

65

Naming Actors
1) group individuals according to how they use the system by identifying the roles they adopt while using the system 2) each role is a potential actor 3) name each role and define its distinguishing characteristics 4) do not equate job titles with roles; roles cut across jobs 5) use common names for existing system; avoid inventing new

Use Case Template

Fields Use Case Name Actors Purpose Overview Precondition Variation Exceptions Policies Post-conditions Priority Frequency Cross reference Description Name of the use case Role names of people or external entities initiating the use case The intention of the use case A brief description of the usage of the process A condition that must hold before a use case can begin Different ways to accomplish use case actions What might go wrong during the execution of the use case Specific rules that must be enforced by the use case Condition that must prevail after executing the use case How important is the use case? How often is the use case performed? Relate use cases and functional requirements

e-Macao-18-1-194

e-Macao-18-1-195

Task 25
Is this diagram correct ? If not, explain.

Task 26
In the following bank ATM-related use cases, what would best describe a use case of type UseCaseA? a) Open Account b) Withdraw from Account c) Close Account d) Reopen Account e) None of the above

Slides Requirements

66

A.4.3. Conceptual Modelling

e-Macao-18-1-197

Course Outline
1) Object Orientation

Requirements Modelling
Class and Object Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Requirements
e-Macao-18-1-198 e-Macao-18-1-199

67

Concept Definition
What is a concept? An idea, thing or object.

Concept Examples
1) 2) 3) 4) 5) 6) agency license officer applicant internal applicant external applicant

An object can be: 1) represented symbolically 2) defined or described 3) exemplified What is an instance? Each concrete application of the concept.

e-Macao-18-1-200

e-Macao-18-1-201

Concept Identification
Concepts can be: 1) 2) 3) 4) 5) 6) 7) 8) physical or tangible objects places documents, specifications, design or descriptions roles of people container of other things organizations processes catalogs, etc.

Conceptual Model and Classes

Conceptual model: 1) captures the concepts in a domain in an abstract way 2) important part of OO requirements analysis Classes: 1) equivalent to concepts in UML 2) an abstraction of a set of objects 3) objects are concrete entities existing in space and time

Concepts are identified through requirements and use cases.

Slides Requirements
e-Macao-18-1-202 e-Macao-18-1-203

68

Class Diagrams
1) the most widely used diagram of UML 2) models the static design view of a system 3) also useful in modelling business objects 4) used to specify the structure, interfaces and relationships between classes that underlie the system architecture. 5) primary diagram for generating codes from UML models

A Class
A class is: 1) a description of a set of objects that share the same a) attributes, b) operations, c) relationships and d) semantics 2) a software unit that implements one or more interfaces

e-Macao-18-1-204

e-Macao-18-1-205

Class Examples

Class Notation
Basic notation: a solid-outline rectangle with three compartments separated by horizontal lines.

Three compartments: 1) top compartment holds the class name and other general properties of the class 2) middle compartment holds a list of attributes 3) bottom compartment holds a list of operations Alternative styles: 1) suppress the attributes compartment 2) suppress the operation compartment

Slides Requirements
e-Macao-18-1-206 e-Macao-18-1-207

69

Class Notation Example

Stereotypes
1) a mechanism allowing to extend the semantics of UML 2) used to present more information about an artifact 3) notation the name of a new element within the matched guillemets, e.g. <<thread>>

e-Macao-18-1-208

e-Macao-18-1-209

Stereotypes for Classes

Attribute or operation lists in a class may be organized into groups with stereotypes. A number of stereotypes of classes and data types: 1) thread 2) event 3) entity 4) process 5) utility 6) metaclass 7) powerclass 8) enumeration, etc.

Stereotype Descriptions
Stereotype Thread Process Control Description An active class which specifies a lightweight flow that can execute concurrently with other threads within the same processes. An active class which specifies a heavyweight flow that can execute concurrently with other processes. A class which owns almost no information about itself. It represents a behaviour rather than resources and directs the behaviour of other objects almost having no behaviour of its own. A class which represents a resource in the real world. It describes its features and their current condition (their state) and preserves its own integrity regardless of where and when it is used. A class whose attributes and operations are all class scoped. That is a class which no instance. A classifier whose objects are all classes. A classifier whose objects are the children of a given parent. A user defined data type that defines a set of values that do not change.

Entity

Utility Metaclass Powerclass Enumeration

Slides Requirements
e-Macao-18-1-210 e-Macao-18-1-211

70

Attribute/Operation Scope
Different scopes can be specified for the attributes and operations (features) of a class: 1) instance scope - a feature appears in each instance of the class (classifier) 2) class scope - there is just a single instance of the feature for all instances of a class (classifier) Underlining the features name indicates the classifier scope.

Types of Classes
1) abstract class a) cannot have direct instances b) the name is written in italics 2) root class a) cannot be a sub-class b) written with root stereotype 3) leaf class a) cannot be a super-class b) written with leaf stereotype

e-Macao-18-1-212

e-Macao-18-1-213

Class Relationships
Four relationships between classes: 1) association 2) aggregation 3) generalization 4) dependency

Relationship 1: Association
Association - a relationship between two or more classifiers that involves connection among instances.

Person

Company

Example: Person works for the Company.

Slides Requirements
e-Macao-18-1-214 e-Macao-18-1-215

71

Relationship 2: Aggregation
Aggregation - A special form of association that specifies a whole-part relationship between the aggregate (whole) and the component part.

Relationship 3: Generalization
Generalization - A taxonomic relationship between a more general and a more specific element.

Truck Car Engine Example: Truck is a Vehicle. Example: Car has an Engine.

Vehicle

e-Macao-18-1-216

e-Macao-18-1-217

Relationship 4: Dependency
Dependency - A relationship between two elements, in which a change to one element (source) will affect another (target).

Multiplicities for Classes

Shows how many objects of one class can be associated with one object of another class

Policy

Procedure

Example: Procedure depends on the Policy.

Example: a citizen can apply for one or more licenses, and a license is required by one citizen.

Slides Requirements
e-Macao-18-1-218 e-Macao-18-1-219

72

Multiplicities Syntax

Multiplicities for Attributes

Can specify how may instances of an attribute can be associated with one instance of the class. Example: an applicant can have two addresses.

e-Macao-18-1-220

e-Macao-18-1-221

Roles
A role names a behaviour of an entity participating in a particular relationship. Notation: add the name of the role at the end of the association line, next to the class icon. Example: a citizen own a car, sell cars, be an employee, etc.

Class Diagram Example

Slides Requirements
e-Macao-18-1-222 e-Macao-18-1-223

73

Task 27
Is this diagram correct ? If not, explain.

Task 28
Discover and correct all mistakes in the following diagram :

e-Macao-18-1-224

e-Macao-18-1-225

Task 29
Using a UML tool produce a class diagram with all the classes and relationships defined in the Tasks 6, 8 and 10.

Object Diagram
1) models the instances of classes contained in class diagrams 2) shows a set of objects and their relationships at one time 3) modelling object structures involves taking a snapshot of a system at a given moment in time 4) is an instance of a class diagram or the static part of an interaction diagram 5) it contains objects and links

Slides Requirements
e-Macao-18-1-226 e-Macao-18-1-227

74

Object Diagram Usage

Object diagrams are used to: 1) 2) 3) 4) visualize specify construct document

Creating an Object Diagram

1) identify the function/behaviour of interest that results from interaction of classes, interfaces and other artifacts 2) for each function/behaviour, identify the artifacts that participate in the collaboration as well as their relationships 3) consider one scenario that invokes the function/behaviour, freeze the scenario and render each participating object 4) expose the state and attribute values of each object, as necessary to understand the scenario 5) expose the links among these objects

The existence of certain instances in a system, together with their relationships.

e-Macao-18-1-228

e-Macao-18-1-229

Object Diagram Example

Task 30
Using a UML tool produce an object diagram illustrating the class diagram shown in the previous task.

Slides Requirements
e-Macao-18-1-230 e-Macao-18-1-231

75

Task 31
Select the best answer: An object is named: a) with a noun b) with a noun, a colon and then a class name c) with a number and a colon followed by a class name d) just like a class

Task 32
Select the best answer: The object diagram is used for: a) testing and verifying the use cases b) modelling scenarios c) analyzing and testing class diagrams

Slides Requirements

76

A.4.4. Behavioural Modelling

e-Macao-18-1-233

Course Outline
1) Object Orientation

Requirements Modelling
Sequence and State Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Requirements
e-Macao-18-1-234 e-Macao-18-1-235

77

Behavioral Diagrams 1
1) represent how objects behave when you put them to work using the structure already defined in structural diagrams 2) model how the objects communicate in order to accomplish tasks within the operation of the system 3) describe how the system: a) b) c) d) responds to actions from the users maintains internal integrity moves data creates and manipulates objects, etc.

Behavioral Diagrams 2
4) describe discrete pieces of the system, such as individual scenarios or operations Note: not all system behaviour have to be specified - simple behaviours may not need a visual explanation of the communication required to accomplish them.

e-Macao-18-1-236

e-Macao-18-1-237

Scenario
Definition Scenario is a textual description of how a system behaves under a specific set of circumstances. Behaviour described in use cases is the basis for scenarios. Scenarios also provide a basis for developing test cases and acceptance-level test plans.

Scenario Example
Consider the use case Track License Application There are at least two possible scenarios: a) the applicant enters the license application number; the system retrieves the information related to it; the system displays this information b) the applicant enters the license application number; the number does not exist in the agencys database; the system displays an error message

Slides Requirements
e-Macao-18-1-238 e-Macao-18-1-239

78

Scenario Example
Scenario: the applicant enters the license application number; the system retrieves the information related to it; the system displays this information. Steps: 1) Applicant requests to track status of a license application 2) System displays the logon form 3) Applicant enters the logon information 4) Applicant submits the logon information 5) System validates the applicant 6) System displays the form to enter the tracking number 7) Applicant enters the tracking number 8) Applicant submits the license number 9) System retrieves the license information 10) System displays the license information
e-Macao-18-1-240

Task 33
Select a use case among those defined on Task 22 and define a possible scenario for it.

e-Macao-18-1-241

Task 34
Select the best answer: Scenarios are: a) the same as use cases b) the same as test cases c) used to derive test cases d) the same as object diagrams

Sequence Diagram
A sequence diagram shows interactions between objects. Components of sequence diagrams: 1) object lifelines a) object b) timeline 2) messages a) message, stimulus b) signal, exception c) operations, returns d) identification 3) message syntax

Slides Requirements
e-Macao-18-1-242 e-Macao-18-1-243

79

Sequence Diagram Example

Timeline
The timeline is a line that runs: 1. from the beginning of a scenario at the top of the diagram 2. to the end of the scenario at the bottom of the diagram.

e-Macao-18-1-244

e-Macao-18-1-245

Object Lifeline
An object lifeline consists of: 1) an object 2) a timeline If an object is created and destroyed during the message sequence, the lifeline represents its whole lifecycle.

Message
Definition Message is a description of some type of communication between objects. A unit of communication between objects. The sender object may: 1) invoke an operation, 2) raise a signal or 3) cause the creation or destruction of the target object.

Slides Requirements
e-Macao-18-1-246 e-Macao-18-1-247

80

Message Notation
Notation: modelled as an arrow where the tail of the arrow identifies the sender and the head points to the receiver. sender receiver

Stimulus
Definition Stimulus is an item of communication between two objects: 1) it is associated with both sending and receiving objects 2) it travels across a link 3) it may: a) invoke an operation, b) raise a signal (asynchronous message), c) create or destroy an object 4) it may include parameters/arguments in the form of primitive values or object references 5) it is associated with a procedure that causes it to be sent
e-Macao-18-1-248 e-Macao-18-1-249

For each message we need to define: 1) the name of the invoked operation and its parameters 2) the information returned from the message

Stimulus Example
1) Example 1 invoke an operation The citizen object submits the application form by sending a message to the system. The system receives the message and executes the associated procedure. 1) Example 2 create an object When the System receives the message from the applicant submitting the application form, it creates an object to support the new session.

Messages and Stimuli

A message is the specification of a stimulus. The specification includes: 1) the roles the sender/receiver objects play in the interaction 2) the procedure that dispatches the stimulus A stimulus is an instance of a message.

Slides Requirements
e-Macao-18-1-250 e-Macao-18-1-251

81

Operations and Returns

The operation specifies the procedure that the message invokes on the receiving object. The return contains the information passed back from the receiver to the sender. An empty return is valid.

Operations/Returns Example
Example: The Applicant object sends a message to the Agency object to get the list of services it provides. The Agency object returns this information.

operation return

e-Macao-18-1-252

e-Macao-18-1-253

Signal
1) an object may raise a signal through a message 2) a signal is a special type of a class associated with an event that can trigger a procedure within the receiving object 3) a signal does not require a return from the receiving object

Exception
1) an exception is a special type of a signal 2) throwing an exception means sending out a message containing an object that describes the error condition

Slides Requirements
e-Macao-18-1-254 e-Macao-18-1-255

82

Signal Example
Each time System receives a message indicating that some abnormal situation occurred with the database, it raises a signal to DBExceptionHandler to handle the error.

Identification of Messages
A message number or name is used to identify messages. Example:

We identify the message getServices with 1.

e-Macao-18-1-256

e-Macao-18-1-257

Message Syntax 1
All former concepts messages, signals, operations, returns, etc. are part of the message syntax. predecessors '/' sequence-term iteration [condition] return ':=' operation where: 1) predecessors is a comma-separated list of sequence numbers of all messages that must come before the current message 2) sequence-term may be either a number or a name that identifies the message

Message Syntax 2
3) iteration determines if a message should be sent once or several times in a sequence: a) one message - add an iteration symbol (*) and a condition to control the number of iterations b) many messages - enclose the set of messages in a box 4) condition specifies the control of the iteration; expressed as a text enclosed within square brackets 5) return may include a list of values sent back to the sender 6) operation defines the name of the operation and optionally its parameters and a return value

Slides Requirements
e-Macao-18-1-258 e-Macao-18-1-259

83

Message Syntax Example

Example: 6/8:getAddress * [foreach ApplicationForm] return text:= getAddress(Citizen.Id:Integer) 1. Specifies the message number 8 called getAddress. 2. The message will be executed more than once (*), one time for each ApplicationForm. 3. Each message calls the operation getAddress of the receiving object, sending CitizenId parameter of type Integer, and returns a value of type text. 4. For the execution of this message, it is required that the message 6 has already been executed.
e-Macao-18-1-260

Example Scenario
Recall the scenario: an applicant tracks the status of a license application and the system displays the license information. Procedure: 1. Applicant requests to track the status of a license application 2. System displays the logon form 3. Applicant enters the logon information 4. Applicant submits the logon information 5. System validates the applicant 6. System displays the form to enter the tracking number 7. Applicant enters the tracking number 8. Applicant submits the tracking number 9. System retrieves the license information 10. System displays the license information

e-Macao-18-1-261

Example Sequence Diagram

Task 35
Based on the scenario defined in the previous Task, produce the sequence diagram using the UML tool.

Slides Requirements
e-Macao-18-1-262 e-Macao-18-1-263

84

Task 36
Is there any problem in the following sequence diagram? Explain.

Task 37
Select the best answer: A timeline is: a) an event signaling the termination of a timed process, much the same as an alarm on a timer b) another name for a sequence c) used in a sequence diagram as an alternative to numbering events d) the amount of time it takes to complete a set of iterations

e-Macao-18-1-264

e-Macao-18-1-265

Statechart Diagrams
A statechart diagram defines the behaviour of a single object or of a set of objects related by a collaboration. It captures the changes in an object throughout its lifecycle as they occur in response to internal and external events. The scope of a statechart is the entire life of one object.

Statechart Components
Statecharts are composed of: 1) states a) initial state b) final state 2) events a) guard conditions b) actions c) event syntax 3) complex states a) activities b) entry actions c) exit actions

Slides Requirements
e-Macao-18-1-266 e-Macao-18-1-267

85

State
Definition State is the current condition of an object reflected by the values of its attributes and its links to other objects.

Initial State
The initial state identifies the state in which an object is created or constructed. The initial state is called a pseudo-state because it does not really have the features of an actual state, but it helps clarify the purpose of another state of the diagram. Notation:

Notation:

Particular states are initial and final states.

e-Macao-18-1-268

e-Macao-18-1-269

Final State
The final state is the state in which once reached, an object can never do a transition to another state. The final state may also mean that the object has actually been destroyed and can no longer be accessed. Notation:

Event
Definition Event is an occurrence of a stimulus that can trigger a state transition. An event may be: 1) the receipt of a signal, e.g. the reception of an exception 2) the receipt of a call, that is the invocation of an operation, e.g. for changing the expiration date of a license An event on a statechart diagram corresponds to a message on a sequence diagram. Notation:

Slides Requirements
e-Macao-18-1-270 e-Macao-18-1-271

86

Statechart Diagram Example

Guard Condition
Typically, an event is received and responded unconditionally. When the receipt of an event is conditional, the test needed is called the guard condition.

e-Macao-18-1-272

e-Macao-18-1-273

Event Actions
The response to an event has to explain how to change the attribute values that define the objects state. The behaviour associated with an event is called action expression: 1. Part of a transition event specifying the change from one state to another. 2. An atomic model of execution, referred to as run-tocompletion semantics.

Event Actions Example

Slides Requirements
e-Macao-18-1-274 e-Macao-18-1-275

87

Event Syntax
event-name ( [comma-separated-parameters-list] ) [[guard-condition]] / [action-expression] where: 1) event-name - identifies the event 2) parameters-list - data values passed with the event for use by the receiving object in its response to the event 3) guard-condition - determines whether the receiving object should respond to the event 4) action-expression - defines how the receiving object must respond to the event
e-Macao-18-1-276

Event Syntax Example

Example: approveLicense(License.Id) [req=ok] /setExistLicense(true) where: 1) approveLicense is the event name 2) License.Id is the event parameter 3) the guard condition specifies that the req attribute must be OK for the receiving object to respond to the event. 4) the action executed in the receiving object is a call to the method setExistLicense which sends true as its parameter
e-Macao-18-1-277

Complex States
The state icon can be expanded to model what the object can do while it is in a given state. The notation splits the state icon into two compartments: 1. name compartment and 2. internal transitions compartment.
state name compartment internal transitions compartment

Entry Actions
More than one event can trigger a transition of an object into the same state. When the same action takes place in all events that goes into a state, the action may be written once as entry action. Notation: 1) use the keyword entry followed by a slash and the actions to be performed every time the state is entered 2) entry actions are part of internal transitions compartment

Internal transitions compartments contains information about actions, activities and internal transitions specific to that state.

Slides Requirements
e-Macao-18-1-278 e-Macao-18-1-279

88

Exit Actions
The same simplification can be used for actions associated with events that trigger a transition out of a state. They are called exit actions. Notation: 1) use the keyword exit followed by a slash and the actions performed every time the state is exited 2) exit actions are part of the internal transitions compartment Only when the action takes places every time the state is exited.

Entry/Exit Actions Example

e-Macao-18-1-280

e-Macao-18-1-281

Activities 1
Activities are the processes performed within a state. Activities may be interrupted because they do not affect the state of the object. Notation: 1) use the do keyword followed by a slash and activities 2) activities are placed in the internal transitions compartment.

Activities 2
An activity should be performed: 1) from the time the object enters the state 2) until a) either the object leaves the state or b) the activity finishes. If an event produces a transition out of the activity state, the object must shut down properly and exit the state.

Slides Requirements
e-Macao-18-1-282 e-Macao-18-1-283

89

Internal Transitions
An event that can be handled completely without a change in state is called an internal transition. It also can specify guard conditions and actions. Notation: 1) uses the keyword internal transition followed by a slash and one event action 2) they are placed in the internal transitions compartment

Order of Events
1) if an activity is processed in the current state, interrupt it and finish it properly 2) execute the exit actions 3) execute the actions associated with the event that triggered the transition 4) execute the entry actions of the new state 5) begin executing the activities of the new state

e-Macao-18-1-284

e-Macao-18-1-285

Self Transition
A self-transition is an event that is sufficiently significant to interrupt what the object is doing. It forces the object to exit the current state and return to the same state. The result is to stop any activity within the object, exit the current state and re-enter the state.

Important Features
Within the statechart diagram: 1) an object need not know who sent the message 2) an object is only responsible for how it responds to the event Focusing on the condition of the object and how it responds to the events, which object sends the message becomes irrelevant and the model is simplified The state of the object when it receives an event can affect the objects response event + state = response

Slides Requirements
e-Macao-18-1-286 e-Macao-18-1-287

90

Defining Send Events

Sometimes the object modelled by the statechart needs to send a message to another object, in this case the outgoing event must define which is the receiving object. Also, this event must be caught by the receiving object. A message send to another object is called a send event. Notation: provide the object name before the action expression with a period separating both.

Relating Diagrams 1
1) the sequence diagram models the interactions between objects 2) the statechart diagram models the effect that these interactions have on the internal structure of each object 3) the messages modelled in the sequence diagrams are the external events that place demands on objects

e-Macao-18-1-288

e-Macao-18-1-289

Relating Diagrams 2
4) the objects internal responses to those events that cause changes to the objects' states are represented in the statechart diagram 5) not all objects need to be modelled with a statechart diagram 6) the objects that appear in many interactions and are target of many events are good candidates to be modelled with a statechart diagram

Sequence to Statechart
1) identify the events directed at the lifeline of the desired object 2) identify candidate states by isolating the portions of the lifeline between the incoming events 3) name the candidate states using adjectives that describe the condition of the object during the period of time represented by the gap
events possible state?

4) add the new state and events to the statechart diagram

Slides Requirements
e-Macao-18-1-290 e-Macao-18-1-291

91

Task 38
Discover and correct all mistakes in the following diagram:

Task 39
Select the best answer: A state is the condition of an object a) upon construction b) that governs whether an event will trigger a transition c) at the beginning and at the end of a scenario d) at a point in time

e-Macao-18-1-292

e-Macao-18-1-293

Task 40
Select the best answer: An event action is an action that: a) must take place when an object enters the state b) must take place when triggered by the associated event c) must always take place when an object leaves the state d) causes no change in an objects state

Task 41
Using a UML tool define a statechart diagram for the license class. The diagram should contain at least three states. What is the relation between this diagram and the class diagram defined in the conceptual modelling? What is the relation between this diagram and the set of sequence diagrams?

Slides Requirements
e-Macao-18-1-294 e-Macao-18-1-295

92

Summary 1
A requirement is a function that a system must perform or a desirable characteristic of a system. There are different kinds of requirements such as functional and non-functional requirements. Most project failures can be traced back to errors made in the requirements gathering and specification.

Summary 2
Use cases are descriptions of sets of action sequences that a system performs to deliver observable results. Use cases may be related using generalization, include and extend relationships. Actors are the entities that interact with the system, causing it to respond to events. Use case diagrams show a set of: 1. use cases, 2. actors and 3. their relationships.
e-Macao-18-1-296 e-Macao-18-1-297

Summary 3
Conceptual modelling helps to understand application domains. Conceptual class diagrams describe and relate the concepts of a domain. They show attributes but not methods. An object diagram models the instances of the classes contained in a given class diagram.

Summary 4
Behavioral modelling specifies how objects work together to provide a specific behaviour. Sequence diagrams show how objects interact in order to deliver a discrete piece of the system functionality. Statechart diagrams capture the changes in an object or a set of related objects as they occur in response to events.

Slides Requirements
e-Macao-18-1-298 e-Macao-18-1-299

93

Summary 5
Sequence diagrams: 1) show interactions between objects. 2) model the dynamic behaviour of a system.

Summary 6
Statechart diagrams: 1) show a state machine consisting of states, transitions, events and activities. 2) model the dynamic behaviour of a system.

3) emphasize the chronological ordering of messages. 3) emphasize the event-driven ordering.

Slides Architecture

94

A.5. Architecture A.5.1. Software Architecture

e-Macao-18-1-301

Course Outline
1) Object Orientation 2) UML Basics

Architecture Modelling

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Architecture
e-Macao-18-1-302 e-Macao-18-1-303

95

Architecture
Architecture involves defining: a) what are the main components of the system b) how this components are related. The architecture shows: a) the structural organization of a system from its components b) how elements interact to provide the systems overall behaviour or required functionality Architectural concerns: a) structural or static b) behavioural

Architecture Definition
Definition Architecture is a set of significant decisions about the organization of a software system. Such decisions include: 1. the selection of structural elements and their interfaces 2. the composition of these structural and behavioural element into progressively larger subsystem 3. the architectural style that guides this organization the elements and their interfaces, their collaboration and composition

e-Macao-18-1-304

e-Macao-18-1-305

Architecture Example
E-Licensing System
Back Office Application Front Office Application Workflow Manager Messaging

Architecture Concepts
Some concepts related to architecture: 1) subsystems a) classes b) services 2) design principles for defining subsystems: 1) coupling 2) cohesion 3) layering strategy for defining subsystems: 1) responsibility driven 2) reuse driven

Decision Support

Identity Verification

Slides Architecture
e-Macao-18-1-306 e-Macao-18-1-307

96

Subsystems: Classes
A solution domain may be decomposed into smaller parts called subsystems. Subsystems may be recursively decomposed into simpler subsystems. Subsystems are composed of solution domain classes (design classes).

Subsystems: Classes Example

e-Macao-18-1-308

e-Macao-18-1-309

Subsystems: Services
A subsystem is characterized by the services it provides to other subsystems. A service is: 1) a set of related operations that share a common purpose 2) a set of operations of a subsystem that are available to other subsystem through the subsystems interface

Subsystem: Services Example

e-Service 1 e-Service 1 xG2G Interfaces xG2G Interfaces

xG2G Gateway

Notification Service INotification Notification Service - - INotification Send notices Send notices Lookup notifications Lookup notifications Subscription Service ISubscription Subscription Service - - ISubscription Channel subscribe Channel subscribe Channel un-subscribe Channel un-subscribe

e-Service 2 e-Service 2

Slides Architecture
e-Macao-18-1-310 e-Macao-18-1-311

97

Coupling
Definition Coupling is the strength of dependencies between two subsystems. Loose coupling results in: 1) sub-system independence 2) better understanding of sub-systems 3) easier modification and maintenance High coupling is generally undesirable.

Coupling Example
Uncoupled no dependencies

Loosely coupled some dependencies

e-Macao-18-1-312

Highly coupled many dependencies

e-Macao-18-1-313

Cohesion
Definition Cohesion or Coherence is the strength of dependencies within a subsystem.

Low Cohesion Example

independent

In a highly cohesive subsystem: subsystem contains related objects all elements are directed toward and essential for performing the same task.

Low cohesion is generally undesirable

Slides Architecture
e-Macao-18-1-314 e-Macao-18-1-315

98

High Cohesion Example

Layering
Layering is a strategy for dividing system into subsystems. Layering: 1) divides a system into a hierarchy of subsystems 2) follows two common approaches: a) responsibility driven b) reuse driven

e-Macao-18-1-316

e-Macao-18-1-317

Layering styles
1) responsibility driven: a) layers have well-defined responsibilities b) layers fulfill specific roles 2) reuse driven: a) layers are designed to allow maximum reuse of system elements b) higher level layers use services of lower level layers

Layered Architecture Example

3 Layer decomposition

Slides Architecture
e-Macao-18-1-318

99

Task 42
1) Consider a typical client-server application. Assume that the client subsystem is a layer and the server is the other layer. Which of the two layering styles best describes this architecture? 2) Justify your answer in question 1.

Slides Architecture

100

A.5.2. Collaboration Diagrams

e-Macao-18-1-320

Course Outline
1) Object Orientation

Architecture Modelling
Collaboration Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Architecture
e-Macao-18-1-321 e-Macao-18-1-322

101

Collaboration
Definition A collaboration is a society of classes, interfaces, and other elements that work together to deliver or provide some cooperative behaviour that is bigger than the sum of all its parts. A collaboration: 1) names a conceptual chunk that encompasses both static and dynamic aspects 2) specifies the realization of a use case

Collaboration Example

Inter-node Messaging Collaboration and its details e-Macao-18-1-323 e-Macao-18-1-324

Collaboration Names
1) every collaboration must have a name 2) collaboration names are nouns or short noun phrases, typically first letter of the letter is capitalized. Example: Inter-node Messaging or Application Submission

Collaboration Structural
1) specifies the classifiers, such as classes, interfaces, components and nodes that are required to interact 2) does not own any of its structural elements 3) only references the classifiers declared elsewhere

Slides Architecture
e-Macao-18-1-325 e-Macao-18-1-326

102

Collaboration Structural View

Task 43
Select one of the use cases already defined restaurant licensing application: 1) identify the classes that are essential in realizing this use case 2) show the relationship between these classes 3) name the collaboration defined by these classes

Structural View of Collaboration which implements a send and receive message use case
e-Macao-18-1-327 e-Macao-18-1-328

Collaboration Behavioural
1) rendered using interaction diagram 2) specifies a set of messages that are exchanged among a set of objects to accomplish a specific purpose a use case or operation 3) defines an interaction context

Collaboration Behavioral View

Slides Architecture
e-Macao-18-1-329 e-Macao-18-1-330

103

Collaboration Diagram
Definition A collaboration diagram shows the interactions organized around the structure of a model, using either: a) classifiers (e.g. classes) and associations, or b) instances (e.g. objects) and links. 1) is an interaction diagram 2) is similar to the sequence diagram 3) reveals both structural and dynamic aspects of a collaboration 4) reveals the need for the associations in the class diagram

Collaboration Diagram Example

e-Macao-18-1-331

e-Macao-18-1-332

Notation 1
1) A collaboration diagram shows a graph of either instances linked to each other or classifiers and associations. 2) Navigability is shown using arrow heads on the lines representing links. 3) An arrow next to a line indicates a stimuli or message flowing in the given direction. 4) The order of interaction is given with a number.

Notation 2
1. object 2. synchronous event or procedure call 3. simple return 4. self-reference 5. sequence number 6. anonymous object 7. iteration comment

Slides Architecture
e-Macao-18-1-333 e-Macao-18-1-334

104

Collaboration Objects
1) the backbone of the collaborating diagram 2) may have fully qualified name e.g. Bill of class Customer 3) may be anonymous 4) same as in the sequence diagram

Collaboration Messages
1) involves sending of messages between class roles over associations 2) messages could be: a) synchronous events: requires a reply b) return: a reply message c) asynchronous: does not require a reply 3) same as in sequence diagram

e-Macao-18-1-335

e-Macao-18-1-336

Self Reference
1) a message from an object to itself 2) sender and receiver of the message is the same object 3) self invocation

Sequence Number
1) collaboration diagram does show explicitly passage of time 2) sequence numbers to show order of execution for the messages 3) no particular standard for numbering

Slides Architecture
e-Macao-18-1-337 e-Macao-18-1-338

105

Collaboration and Object Diagram

Building Collaboration Diagram

1) place participating objects on the diagram 2) draw the links between the objects using the class diagram as your guide 3) add each event by placing the message arrow parallel between the two objects 4) position the arrow to point from the sender to the receiver 5) number the messages in order of execution 6) repeat steps 3 and 4 until the entire scenario has been modeled

e-Macao-18-1-339

Task 44
1) Consider the use case selected in Task 22. List an instance for each of the classes involved in the collaboration for this use case. 2) Provide a collaboration diagram for involving the objects listed in 1.

Slides Architecture

106

A.5.3. Component Diagrams

e-Macao-18-1-341

Course Outline
1) Object Orientation

Architecture Modelling
Component Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Architecture
e-Macao-18-1-342 e-Macao-18-1-343

107

Component
Definition A component is a physical, replaceable part that conforms to and provides the realization of a set of interfaces.

Component Example

A component: 1) encapsulates the implementation of classifiers residing in it 2) does not have its own features, but serves as a mere container for its elements 3) are replaceable or substitutable parts of a system A component named OrderEntry.exe

e-Macao-18-1-344

e-Macao-18-1-345

Component Names
1) component must have a unique name 2) name is a textual string which may be written as a simple name or with a path name.

Component and Classes 1

similarities 1) both may realize a set of interfaces 2) both may participate in dependencies, generalizations and associations 3) both may be nested 4) both may have instances differences 1) classes represent logical abstraction while components represent physical things 2) components represent the physical packaging of logical components and are at a different level of abstraction 3) classes may have attributes and operations whereas components only have operations reachable only through the their interfaces

Simple name

Path name

5) both may participate in an interaction

Slides Architecture
e-Macao-18-1-346 e-Macao-18-1-347

108

Component and Classes 2

Components and Interfaces

Definition An interface is a collection of operations that are used to specify a service of class or components.

Interfaces: 1) represent the major seam of the system 2) are realized by components in implementation 3) promotes the deployment of systems whose services are location independent and replaceable

e-Macao-18-1-348

e-Macao-18-1-349

Interface Notation 1
Relationship between a component and its interface may be shown in two ways: Style 1 a) interface in elided iconic form b) component that realize the interface is connected to the interface using an elided realization relationship

Interface Notation 2
Style 2: a) interface is presented in an enlarged form, possibly revealing operations elided iconic form b) realizing component is connected to it using a full realization relationship

Slides Architecture
e-Macao-18-1-350 e-Macao-18-1-351

109

Export Interface
Definition An interface that a component realizes is called an export interface, meaning an interface that the component provides as a service to other components.

Import Interface
Definition An interface that a component uses is called the import interface, meaning the interface that the component relies upon to implement its own behavior.

Components may export more than one interface.

Components may import more than one interface. They may also import and export interfaces at the same time.

e-Macao-18-1-352

e-Macao-18-1-353

Component Replaceability
1) The key intent of any component-based system is to permit the assembly of systems from replaceable parts. 2) A system can be: a) created out of existing components b) evolved by adding new components and replacing old ones without rebuilding the system 3) Interfaces allow easy reconfiguration of component-based systems.

Task 45
1) Identify at least three major components for the restaurant license application. 2) Describe the interface for each of the components.

Slides Architecture
e-Macao-18-1-354 e-Macao-18-1-355

110

Types of Components
Three types: deployment, work product and execution. 1) deployment: component necessary and sufficient to form an executable system such as DLLs and EXEs 2) work product component: residue of development process consisting of things like source code files and data files from which deployment components are created 3) execution component: created as a consequence of an executing system

Component Stereotypes 1
1) executable: specifies that a component may be executable on a node 2) library: specifies a static or dynamic object library 3) table: specifies a component that represents a database table 4) file: specifies a component that represents a document containing source code or data 5) document: specifies a component that represents a document

e-Macao-18-1-356

e-Macao-18-1-362

Component Stereotypes 2

Task 46
1) Add possible implementing artifacts for components listed in Task 45. 2) Using a UML tool, produce a component diagram containing the components in Task 45 and the implementing artifacts listed in question 1.

Slides Architecture

111

A.5.4. Packages

e-Macao-18-1-364

Packages
Packages:

Architecture Modelling
Packages

1) are general purpose mechanism for organizing modelling elements into groups 2) group elements that are semantically close and that tend to change together Packages should be loosely coupled, highly cohesive, with controlled access to its contents.

Slides Architecture
e-Macao-18-1-365 e-Macao-18-1-366

112

Package Example 1

Package Notation
drawn as a tabbed folder packages references one another using standard dependency notation for instance: Purchasing package depends on Receiving package packages and their dependencies may be stereotyped

e-Macao-18-1-367

e-Macao-18-1-368

Owned Elements
1) A package may own other elements for instance: classes, interfaces, components, nodes, collaborations, use cases, diagrams and other packages. 2) Owning is a composite relationship. 3) A package forms a namespace, thus elements of the same kind must be named uniquely. For example you cannot have two classes in the same package with the same name.

Owned Elements Example

Slides Architecture
e-Macao-18-1-369 e-Macao-18-1-370

113

Visibility
1) visibility of owned elements is similar to visibility of attributes and operations of classes 2) owned elements are visible to importing or enclosing package contents 3) protected elements can also be seen by children packages 4) private elements cannot be seen outside their owning package

Visibility Example
1) Auxiliary Package owns: a) Agency b) Application c) Applicant 2) package importing Auxiliary Package will have access to the Agency element but not Application

e-Macao-18-1-371

e-Macao-18-1-372

Package Stereotypes
UML provides five stereotype that apply to packages: 1) Faade: a package that is only a view on some other packages 2) Framework: a package that consists mainly of patterns 3) Stub: specifies a package that serves as a proxy for the public contents of another package 4) Subsystem: a package representing an independent part of the entire system being modeled 5) System : specifies a package representing the entire system being modeled

Package Example 1

Slides Architecture
e-Macao-18-1-373

114

Task 47
1) Consider an application currently running in your organization. List the major subsystems of the application 2) Using a UML tool, provide an architectural model in terms of these subsystems using packages

Slides Architecture

115

A.5.5. Frameworks and Patterns

e-Macao-18-1-375

Course Outline
1) Object Orientation

Architecture Modelling
Patterns

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Architecture
e-Macao-18-1-376 e-Macao-18-1-377

116

Patterns What are they?

Each pattern describes a problem which occurs over and over again in our environment, and then describes the core of the solution to that problem, in such a way the you can use this solution a million times over, without doing it the same way twice.
Christopher Alexander (Patterns in buildings and towns)

Patterns Definition
Definition A generalized solution to a problem in a given context where each pattern has a description of the problem, solution context in which it applies, and heuristics including use advantages, disadvantages and trade-offs.

Patterns: identify, document, and classify best practices in OOD generalize the use and application of a society of elements

e-Macao-18-1-378

e-Macao-18-1-379

Pattern Elements
1) name: a handle which describes the design problem, its solution, and consequences in a word or two 2) problem: describes when to apply the pattern and explains the problem and its context 3) solution: elements that must make up the design, their relationships, responsibilities and collaborations. 4) consequences: associated trade-offs in using the pattern.

Pattern Example 1
1) Name: Observer 2) Problem: a) when an abstraction has two aspects, one dependent on the other b) when a change to one object requires changing others, and you dont know how many objects need to be changed c) when an object should be able to notify other object without making assumptions about who these objects are

Slides Architecture
e-Macao-18-1-380 e-Macao-18-1-381

117

Pattern Example 2
3) Solution:

Pattern Example 3
3) Solution:

e-Macao-18-1-382

e-Macao-18-1-383

Pattern Example 4
4) Consequences: a) abstract coupling between Subject and Observer b) support for broadcast communication c) unexpected updates

Types of Patterns
1) Creational Patterns a) instantiation of objects b) decoupling the type of objects from the process of constructing that object 2) Structural and Architectural patterns a) organization of a system b) larger structures composed from smaller structures. 3) Behavioural Patterns a) assigning responsibilities among a collection of objects.

Slides Architecture
e-Macao-18-1-384 e-Macao-18-1-385

118

Framework 1
Definition A Framework is a reusable software architecture that provides the generic structure and behaviour for a family of software applications, along with a context that specifies their collaboration and use. Framework: 1) collection of patterns defined as template collaborations with supporting elements. 2) skeletal solution in which specific element must be plugged in order to establish an actual solution. 3) depicted as packages stereotyped with the framework keyword
e-Macao-18-1-386

Framework 2
1) made up of a set of related classes that can be specialized or instantiated to implement an application 2) lack the necessary application specific functionality and therefore not immediately useful 3) prefabricated structure or template of a working application in which plug-points or hot spots are not implemented or are given overidable implementations 4) patterns can be used to document frameworks 5) they are physical realization of one or more patterns

e-Macao-18-1-387

Framework Example

Architecture Patterns
1) Repository 2) Model-View-Controller (MVC) 3) Client-Server 4) Peer-to-Peer 5) Pipe-and-Filter

Slides Architecture
e-Macao-18-1-388 e-Macao-18-1-389

119

Repository Architecture 1
1) subsystems access and modify data from a single data structure called the repository 2) subsystems are relatively independent and interact through the central data structure 3) control flow can be dictated either by the central repository or by the subsystem 4) it is usually employed in database applications, compilers and software development environment

Repository Architecture 2

UML Class Diagram Describing Repository Architecture

e-Macao-18-1-390

e-Macao-18-1-391

MVC Architecture 1
Subsystems are classified into three different types: a) model subsystems maintains domain knowledge b) view subsystems displays information to users c) controller subsystem controls sequence of interaction

MVC Architecture 2
1) model subsystems are written independently of view or controller subsystems 2) changes in models state are propagated to the view subsystem through the subscribe/notify protocol 3) MVC architecture is a special case of repository architecture; model is the central repository and the controller subsystem dictates control flow

Slides Architecture
e-Macao-18-1-392 e-Macao-18-1-393

120

MVC Architecture 3

Client Server Architecture 1

1) two kinds of subsystems the Server and Client 2) server subsystem provides services to instances of the other subsystems called clients; which interacts with the users 3) service requests are usually through remote procedure call or some other distributed programming techniques 4) control flow in clients and servers is independent except for synchronization to manage requests and receive results 5) there may be multiple servers subsystems like in the case of the world-wide web

Structural and Behavioural Description of MVC Architecture

e-Macao-18-1-394

e-Macao-18-1-395

Client Server Architecture 2

Peer-to-Peer Architecture 1
1) generalization of the client-server architecture in which subsystems can be clients or servers dynamically 2) control flow within subsystems is independent from the others except for synchronization on requests 3) more difficult to design than client server systems as there are possibilities of deadlocks

Client Server Architecture - Structural Description

Slides Architecture
e-Macao-18-1-396 e-Macao-18-1-397

121

Peer-to-Peer Architecture 2

Pipe-and-Filter Architecture 1
1) subsystems process data received from a set of input and send results to other subsystems via set of outputs 2) subsystems are called filters and the association between filters are called pipes 3) filters only know about the content and format of the data received on the input pipes and not the input filters 4) each filter is executed concurrently and synchronization is done via the pipes 5) pipes and filters can be reconfigured as required

Peer-to-Peer Architecture Behavioural and Structural Descriptions

e-Macao-18-1-398 e-Macao-18-1-399

Pipe-and-Filter Architecture 2

Task 48
1. The MVC architecture is better than the Client-Server architecture. Do you agree with this statement? 2. List two reasons for your agreement or disagreement with the statement in question 1.

Slides Architecture
e-Macao-18-1-400 e-Macao-18-1-401

122

Summary 1
1) Architecture is concerned with the structural organization of system components as well as how they interact to provide the systems overall behaviour or functionality. 2) A collaboration is a society of classes which provides some cooperative behavior that is more than the sum of all its parts. 3) Collaborations have both structural and behavioral aspects. 4) Collaborations may realize a use case or an operation.

Summary 2
5) A collaboration diagram shows interactions organized around the structure of a model, using either classes and associations or instances and links. 6) A component is a physical, replaceable part that conforms to and provides the realization of a set of interfaces. 7) An interface is a collection of operation that are used to specify a service of class or components.

e-Macao-18-1-402

e-Macao-18-1-403

Summary 3
8) There are three categories of components: deployment, work product and execution. 9) Components may be stereotyped as executable, library, table, file or document. 10) Component diagram consists of specifying classes, implementing artifacts, components, interfaces and relationships between these model elements.

Summary 4
11) Packages are general purpose mechanisms for organizing modeling elements into groups. 12) Well structured packages must be loosely coupled and very cohesive. 13) Basic architectural patterns or styles include: repository, MVC and client-server.

Slides Design

123

A.6. Design A.6.1. Software Design

e-Macao-18-1-405

Course Outline
1) Object Orientation 2) UML Basics

Design Modelling

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Design
e-Macao-18-1-406 e-Macao-18-1-407

124

System Design
There are two ways of constructing a software design: one way is to make it so simple that there are obviously no deficiencies, and the other way is to make it so complicated that there are no obvious deficiencies C.A.R. Hoare

What is System Design

Definition System Design is the transformation of analysis models of the problem space into design models (based on the solution space). It involves selecting strategies for building the system e.g. software/hardware platform on which the system will run and the persistent data strategy.

e-Macao-18-1-408

e-Macao-18-1-409

System Design Overview 1

Analysis produces: a) a set of non-functional requirements and constraints b) a use case model describing functional requirements c) a conceptual model, describing entities d) a sequence diagram for each use case showing the sequence of interaction among objects e) statechart diagrams showing possible states of objects

System Design Overview 2

Design results in: a) a list of design goals qualities of the system b) software architecture describing: a) the subsystem responsibilities, b) dependencies among subsystems, c) subsystem mapping to hardware, d) major policy decision such as control flow, access control, and data storage

Slides Design
e-Macao-18-1-410 e-Macao-18-1-411

125

System Design Activities

1) definition of design goals 2) decomposition of system into sub-system 3) selection of off-the-shelf and legacy components 4) mapping of sub-systems to hardware 5) selection of persistent data management infrastructure 6) selection of access control policy 7) selection of a global control flow mechanism 8) handling of boundary conditions

Some Design Activities 1

1) Define goals a) derived from non-functional requirements 2) Hardware and software mapping a) what computers (nodes) will be used? b) which node does what? c) how do nodes communicate? d) what existing software will be used and how? 3) Data management a) which data needs to be persistent? b) where should persistent data be stored? c) how will the data be stored?

e-Macao-18-1-412

e-Macao-18-1-413

Some Design Activities 2

4) Access control a) who can access which data? b) can access control be changed within the system? c) how is access control specified and realized? 5) Control flow a) how does the system sequence operations? b) is the system event-driven? c) does it need to handle more than one user interaction at a time?

What is Object Design? 1

1) system design describes the system in terms of its architecture: a) subsystem decomposition, b) global control flow and c) persistency management 2) object design includes: a) service specification b) component selection c) object model restructuring d) object model optimization

Slides Design
e-Macao-18-1-414 e-Macao-18-1-415

126

What is Object Design? 2

1) service specification precise description of class interface 2) component selection identification of off-the-shelf components and solution objects 3) object model restructuring transform the object design model to improve understandability and extensibility 4) object model optimization transform object model to address performance (response time, memory etc.)

Object Design Activities 1

1) specification a) missing attributes and operations b) type signatures and visibility c) constraints d) exceptions 2) component selection a) adjusting class libs b) adjusting application frameworks 3. restructuring a) realizing associations b) increasing reuse c) removing implementation dependencies 4. optimization a) access paths b) collapsing objects c) caching results of expensive comp d) delaying expensive comp

Slides Design

127

A.6.2. Design Class Diagrams

e-Macao-18-1-417

Course Outline
1) Object Orientation

Design Modelling
Class Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Design
e-Macao-18-1-418 e-Macao-18-1-419

128

Design Classes
Class: basis for other diagrams and UML models describes the static view of the system

Design Class Example 1

Design Classes: different from domain classes design classes express the definitions of classes as software components

e-Macao-18-1-420

e-Macao-18-1-421

Design Class Example 2

Design Class Diagram

1) provides the specification for software classes and interfaces in an application 2) includes: a) classes, associations and attributes b) interfaces, with their operations and constants c) methods d) attribute type information e) navigability f) dependencies

Slides Design
e-Macao-18-1-422 e-Macao-18-1-423

129

Creating Design Class Diag. 1

1) identify all classes participating in object interaction by analyzing the collaborations 2) present them in a class diagram 3) copy attributes from the associated concepts in the conceptual model 4) add methods names by analyzing the interaction diagrams 5) add type information to the attributes and methods

Creating Design Class Diag. 2

6) add the association necessary to support the required attribute visibility 7) add navigability arrows necessary to the associations to indicate the direction of the attribute visibility 8) add dependency relationship lines to indicate non-attribute visibility

e-Macao-18-1-424

e-Macao-18-1-425

Design Class Diagram Example

Adding Classes
1) identify those classes that participate in the software solution 2) classes can be found by scanning all the interaction diagrams and listing the participating classes

Slides Design
e-Macao-18-1-426 e-Macao-18-1-427

130

Adding Classes Example

Candidate classes: a) Customer b) Order c) Inventory

Adding Attributes
1) after defining the classes, attributes must be added 2) attributes come from software requirements artifacts for example conceptual classes provide a substantial part of the attribute applicable to design classes

e-Macao-18-1-428

e-Macao-18-1-429

Attribute Syntax

Adding Operations
The operations of each class can be identified by analyzing the interaction diagrams: a) messages will include calls to other objects b) self references

Slides Design
e-Macao-18-1-430 e-Macao-18-1-431

131

Operations Syntax

Adding Visibility
Visibility: 1) scope of access allowed to a member of a class 2) applies to attributes and operations

UML visibility maps to OO visibilities: 1) private scope: within a class (-) 2) package scope: within a package (~) 3) public scope: within a system (+) 4) protected scope: within an inheritance tree (#)

e-Macao-18-1-432

e-Macao-18-1-433

Private Visibility
1) private element is only visible inside the namespace that owns it 2) notation is - 3) useful in encapsulation.

Package Visibility
1) package element is owned by a namespace that is not a package, and is visible to elements that are in the same package as its owning namespace 2) notation is ~

Slides Design
e-Macao-18-1-434 e-Macao-18-1-435

132

Public Visibility
1) public element is visible to all elements that can access the contents of the namespace that owns it 2) notation is +

Protected Visibility
1) a protected element is visible to elements that are in the generalization relationship to the namespace that owns it 2) notation is #

e-Macao-18-1-436

e-Macao-18-1-437

Adding Associations
1) end of an association is called a role 2) roles may be decorated with a navigability arrow 3) navigability is a property of a role that indicates that it is possible to navigate uni-directionally across the association from objects of the source to target 4) navigability indicates attributes visibility 5) implementation assumes the source class has an attribute that refers to an instance of the target class

Association Syntax

Slides Design
e-Macao-18-1-438 e-Macao-18-1-439

133

Adding Dependency
1) useful to depict non-attribute visibility between classes 2) useful when there are parameters, global or locally declared visibility

Task 49
Using a UML tool, produce a design class diagram based on the conceptual classes and dynamic models already developed in previous tasks: 1) add attributes if needed 2) add operations 3) add associations with names, roles and multiplicity 4) add necessary dependencies

Slides Design

134

A.6.3. Activity Diagrams

e-Macao-18-1-441

Course Outline
1) Object Orientation

Design Modelling
Activity Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Design
e-Macao-18-1-442 e-Macao-18-1-443

135

Activity Diagrams
1) variation of the state machine in which the states represent the performance of actions or sub-activities 2) transitions are triggered by the completion of the actions or sub-activities 3) one of the five diagrams in UML for modeling the dynamic aspect of a system. Others: sequence, collaboration, statechart, use cases 4) attached through a model to use cases, or to the implementation an operations 5) focuses on flows driven by internal processing (as opposed to external events)

Start State
1) signals the beginning of the activity diagram 2) indicated as a solid dot

e-Macao-18-1-444

e-Macao-18-1-445

End State
1) signals the end of the activity diagram 2) indicated as a bull eye

Action State
1) shorthand for a state with an entry action and at least one outgoing transition involving the implicit event of completing the entry action 2) there may be several outgoing transitions with guard conditions 3) models a step in the execution of a workflow

Slides Design
e-Macao-18-1-446 e-Macao-18-1-447

136

Action State Notation

1) a shape with straight top and bottom and with convex arcs on the two sides 2) action expression is placed in the action state symbol 3) action expression may be described as natural language or pseudo code

Subactivity State
1) it invokes an activity graph 2) executes the associated activity graph 3) completes the subactivity graph is not exited until the final state of the nested graph is reached 4) a single activity graph may be invoked by many subactivity states

e-Macao-18-1-448

e-Macao-18-1-449

Subactivity State Notation

1) shown the same way as an action state with the addition of an icon in the lower right corner depicting a nested activity diagram 2) subactivity name is placed in the symbol

Transitions 1
1) specify the flow of control from one action or activity state to another 2) trigger-less 3) passes control immediately on completion of the work in the source state to the next activity state 4) causes the states exit action (if any) to be executed

Slides Design
e-Macao-18-1-450 e-Macao-18-1-451

137

Transitions 2
1) after reading a page, the page is turned 2) this is repeated continuously

Decisions
1) Decisions are expressed as guard conditions. 2) Different guards are used to indicate different possible transitions that depend on boolean conditions of the owning objects. 3) The predefined guard else may be defined for at most one outgoing transition which is enabled if all the guards labeling the other transitions are false.

e-Macao-18-1-452

e-Macao-18-1-453

Decision - Notation
Decision may be shown by labeling multiple output transitions of an action with different guard conditions. The icon provided for a decision is the traditional diamond shape, with one incoming arrow and with two or more outgoing arrows, each with a distinct guard condition with no event trigger.

Decision Example

Slides Design
e-Macao-18-1-454 e-Macao-18-1-455

138

Forks
1) used for modelling concurrency and synchronization in business processes 2) uses a synchronization bar 3) represents the splitting of a single flow of control into two or more concurrent flows of controls 4) indicates that activities of each of the these flows are truly concurrent when deployed across multiple nodes or sequentially interleaved if deployed on a single node

Fork Example
A single control splitting to three concurrent flows

e-Macao-18-1-456

e-Macao-18-1-457

Joins
1) represents the synchronization of two or more concurrent flows of control. 2) may have two or more incoming transitions and one outgoing transition 3) synchronizes concurrent flows, constraining each flow to waits for other incoming flows

Join Example
Three incoming flows synchronized and proceed as just one flow

Slides Design
e-Macao-18-1-458 e-Macao-18-1-459

139

Forks and Join Example

1) application is prepared for evaluation 2) internal and external evaluation proceeds concurrently 3) decision is made only when the internal and external evaluation are completed

Swimlanes
1) partitions the activity states into groups 2) represent the entity within the organization responsible for those activities 3) has a unique name within a diagram

e-Macao-18-1-460

e-Macao-18-1-461

Swimlanes Example

Object Flow
Objects maybe involved in the flow of control associated with an activity diagram. For example in the workflow of processing an order as shown in the last example, we may wish to show how the state of the order and Bill objects change. We can use dependency relationship to show how objects are created, modified and destroyed by transitions in the activity diagram

Slides Design
e-Macao-18-1-462 e-Macao-18-1-463

140

Object Flow Example

Task 50
1) Provide a narrative for the activity diagram shown. 2) Assume the procedure shown is a workflow for restaurant licensing, suggest possible changes to the model. 3) Show how the status of the application object changes along the flow.

Slides Design

141

A.6.4. Sequence Diagrams

e-Macao-18-1-465

Course Outline
1) Object Orientation

Design Modelling
Sequence Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Design
e-Macao-18-1-466 e-Macao-18-1-467

142

Design Sequence Diagrams

1) present the interactions between objects needed to provide a specific behavior 2) capture the sequence of events between participating objects 3) take into account temporal ordering 4) optionally shows which objects active at any time

Design Sequence Diagrams

Design considerations: a) b) c) d) type of message timing of messages recursive messages object creation and destruction

e-Macao-18-1-468

e-Macao-18-1-469

Synchronous Messages
1) assumes that a return is needed 2) sender waits for the return before proceeding with any other activity 3) represented as a full arrow head 4) return messages are dashed arrows

Asynchronous Messages
1) does not wait for a return message 2) exemplified by signals 3) sender only responsible for getting the message to the receiver 4) usually modeled using a solid line and a half arrowhead to distinguish it from the full arrowhead of the synchronous message

Slides Design
e-Macao-18-1-470 e-Macao-18-1-471

143

Self-Reference Message
A self-reference message is a message where the sender and receiver are one and the same object. 1) in a self-reference message the object refers to itself when it makes the call 2) message 2 is only the invocation of some procedure that should be executed

Timed Messages
1) messages may have user-defined time attributes, such as sentTime or receivedTime 2) user-defined time attributes must be associated with message numbers 3) instantaneous messages are modeled with horizontal arrows 4) messages requiring a significant amount of time, it is possible to slant the arrow from the tail down to the head

e-Macao-18-1-472

e-Macao-18-1-473

Timed Messages Example

Activation and Deactivation

Sequence diagrams can show object activation and deactivation. Activation means that an object is occupied performing a task. Deactivation means that the object is idle, waiting for a message.

For messages 1, 2 and 3 the time required for their execution is considered equal to zero.

Message 4 requires more time (time > 0) for its execution.

Slides Design
e-Macao-18-1-474 e-Macao-18-1-475

144

Activation and Focus of Control

Activation is shown by widening the vertical object lifeline to a narrow rectangle, called an activation bar or focus of control. An object becomes active at the top of the rectangle and is deactivated when control reaches the bottom of the rectangle.

Recursion
An object might also need to call a message recursively, this means to call the same message from within the message. 1) suppose that cityLocations is defined in the class diagram as a set of one or more apartments or houses 2) A letter could be sent to all apartments in a location as shown

activation activation bar deactivation

e-Macao-18-1-476

e-Macao-18-1-477

Creation and Destruction

Object Creation: if the object is created during the sequence execution it should appear somewhere below the top of the diagram. Object Destruction: if the object is deleted during the sequence execution, place an X at the point in the object lifeline when the termination occurs.

Object Creation Example

Alternative A Alternative B

Alternative C

Slides Design
e-Macao-18-1-478 e-Macao-18-1-479

145

Object Destruction Example

Sequence Diagram Example

e-Macao-18-1-480

Task 51
Consider the submit new application use case for restaurant license application. Based on your design classes, provide a sequence diagram to show the interaction required for this use case.

Slides Design

146

A.6.5. Statechart Diagrams

e-Macao-18-1-482

Course Outline
1) Object Orientation

Design Modelling
State Diagrams

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Design
e-Macao-18-1-483 e-Macao-18-1-484

147

Design Statechart Diagrams

Specifies detailed state information: 1) composite states 2) dynamic and static branching

Design Statechart Diagrams

1) statechart diagrams illustrate how these objects behave internally 2) statechart diagrams relate events to state transitions and states 3) transitions change the state of the system and are triggered by events 4) design statechart diagrams provide detailed information on internal behaviors of objects

e-Macao-18-1-485

e-Macao-18-1-486

Static Branch Point

Another pseudo state provided by UML is the static branch point that allows a transition to split into two or more paths. Notation:

Static Branch Point Example

It provides a means to simplify compound guard conditions by combining the like portions into a single transition segment, then branching based on the portions of the guard that are unique.

Slides Design
e-Macao-18-1-487 e-Macao-18-1-488

148

Dynamic Branch Point

In other transitions, the destination is not known until the associated action has been completed. Notation:

Modelling Composite States

A composite state is simply a state that contains one or more statecharts diagrams. Composite states may contain either: 1) a set of mutually exclusive states: literally like embedding a statechart diagram inside a state 2) a set of concurrent states: different states divided into regions, active at the same time A composite state is also called a super-state, a generalized state that contains a set of specialized states called substates.

e-Macao-18-1-489

e-Macao-18-1-490

Sub-States
A composite state (super-state) may be decomposed into two or more lower-level states (sub-states). All the rules and notation are the same for the contained substates as for any statechart diagram. Decomposition may have as many levels as needed.

Sub-States Example
(internal transitions compartment)

(internal transitions compartment)

Slides Design
e-Macao-18-1-491 e-Macao-18-1-492

149

Concurrent Sub-States
Modelling concurrent substates implies that you have many things ocurring at the same time. To isolate them, the composite state is divided into regions, and each region contains a distinct statechart diagram.

Sub-Machine States
A sub-machine state is a shorthand for referring to an existing statechart diagram. Within a composite state, it is possible to reference to a submachine state in the same way that a class may call a subroutine or a function of another class. The composite state containing the sub-machine is called the containing state machine, and the sub-machine is called the referenced state machine. Access to sub-machines states is through entry and exit points that are specified by stub states.

e-Macao-18-1-493

e-Macao-18-1-494

Notation for Sub-Machine

The containing state icon models the reference to the submachine adding the keyword include followed by a slash plus the name of the submachine state. The stub state uses a line with the state name placed near the line. Entry points are represented with a line and the name under the line. Exit points are represented with a line and the name over the line.

Transitions to Sub-States 1
Alternative A: draw a transition pointing to the edge of the composite state icon it means that the composite state starts in the default initial state the default initial state is the sub-state associated with the initial state icon in the contained statechart diagram
(internal transitions compartment)

The initial substate is Waiting for Validation

Slides Design
e-Macao-18-1-495 e-Macao-18-1-496

150

Transitions to Sub-States 2
Alternative B: draw a transition through the edge of the superstate to the edge of the specific sub-state it means that the composite state starts in that specific sub-state

Transitions from Sub-States 1

Alternative A: 1) an event can cause the object to leave the super-state regardless of the current sub-state 2) draw the transition from the edge of the super-state to the new state.

The initial sub-state is Ready for Correction & Notify

(internal transitions compartment)

At any substate the object can do a transition to AnotherState

(internal transitions compartment)

Another State

e-Macao-18-1-497

e-Macao-18-1-498

Transitions from Sub-States 2

Alternative B: 1) an event can cause the object to leave the superstate directly from a specific sub-state 2) implies that the exit event may only happen when the object is in the specific sub-state 3) draw the transition from the edge of the specific sub-state through the edge of the super-state.

Transitions from Sub-States 3

Alternative C: 1) an object may leave a super-state because all the activities in the state and its sub-state has been completed 2) it is called an automatic transition 3) draw the transition from the edge of the super-state to the new state

(internal transitions compartment)

(internal transitions compartment)

Another State

Another State

Slides Design
e-Macao-18-1-499 e-Macao-18-1-500

151

History Indicator 1
The history indicator is used to represent the ability for doing backtracking to a previous composite state. Represents a pseudo-state and is a shorthand notation to solve a complex modelling problem. May refer to: 1) shallow history: the object should return to the last sub-state on the top most layer of sub-states 2) deep history: the object needs to return to the exact sub-state from it which left, no matter how many layers down that is

History Indicator 2
Notation: 1) shallow history 2) deep history
H H*

e-Macao-18-1-501

e-Macao-18-1-502

Split of Control
Split of control means that based on a single transition it is necessary to proceed with several tasks concurrently. Notation:

Merge of Control
Merge of control means that based on the completion of a number of transitions it is necessary to proceed with a single task. Notation:

1) a single transition divided into multiple arrows, each pointing to a different sub-state 2) the division is accomplished by the synchronization bar

multiple transitions converge to a synchronization bar and only one transition outputs from the bar

Slides Design
e-Macao-18-1-503 e-Macao-18-1-504

152

Split/Merge Control Example

Statechart Diagram Example

e-Macao-18-1-505

Task 52
Consider the restaurant license application, provide a detailed statechart diagram for the Application object.

Slides Design

153

A.6.6. Design Patterns

e-Macao-18-1-507

Course Outline
1) Object Orientation

Design Modelling
Patterns

2) UML Basics 3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Design
e-Macao-18-1-508 e-Macao-18-1-509

154

Design Patterns 1
Definition Design patterns are partial solutions to common problems. They name, abstract, and identify the key aspects of common design structure that make it useful for creating reusable object-oriented design.

Design Patterns 2
1) They are related to coding idioms that exist for programming languages. 2) Design patterns capture expert knowledge and design tradeoffs and support the sharing of architectural knowledge among developers. 3) Design patterns as a shared vocabulary can clearly document the software architecture of a system. 4) Allow design engineers relate to one another a a higher level of abstraction.

Some common problems: a) separating interfaces from a number of alternate implementations b) wrapping around a set of legacy classes c) protecting a caller from changes associated with specific platforms

e-Macao-18-1-510

e-Macao-18-1-511

Design Patterns: Description 1

Attribute
Pattern Name and Classification Intent Also Known As Motivation

Design Patterns: Description 2

Attribute
Consequences Implementation Sample Code Known uses Related Patterns

Description
Conveys the essence of the pattern succinctly.

Description
How does pattern support its objectives? What are the tradeoffs? What pitfalls, hints, or techniques you should be aware of when implementing the pattern Code fragment to show implementation Example of patterns found in real systems What design patterns are closely related to this one?

A short statement that answers the following questions: what does the design do? Its rationale and intent. Other well known names for the patterns, if any A scenario that illustrates a design problem and how the class and object structures in the pattern solve the problem. What are the situations in which the design pattern can be applied? Class diagram and sequence diagram for the classes involved in the pattern. The classes and/or the object participating in the design pattern and their responsibilities. How participants collaborate to carry out their responsibilities.

Applicability Structure Participants Collaborations

Slides Design
e-Macao-18-1-512 e-Macao-18-1-513

155

Design Patterns Catalog

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Abstract Factory (C) Adapter (S), Adapter (S)* Bridge (S) Builder (C) Chains of Responsibility (B) Command (B) Composite (S) Decorator (S) Faade (S) Factory Method (C)* Flyweight (S) Visitor (B) 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Interpreter (B)* Iterator (B) Mediator (B) Memento (B) Observer Prototype (C) Proxy (S) Singleton (C) State (B) Strategy (B) Template Method (B)*

Applying Abstract Factory

Problem: encapsulating platforms Solution: Abstract Factory shields an application from the concrete classes provided by a specific platform

C creational pattern, S structural pattern, B Behavioural pattern, * - Class Scope

e-Macao-18-1-514 e-Macao-18-1-515

Applying Adapter
Problem: wrapping around legacy code Solution: Adapter encapsulate a piece of legacy code not designed to work with the system

Applying Bridge
Problem: allowing for alternate implementation Solution: Bridge decouples the interface from the its implementation

Slides Design
e-Macao-18-1-516 e-Macao-18-1-517

156

Applying Command
Problem: encapsulating control Solution: Command encapsulates a control such that user requests can be treated uniformly

Applying Composite
Problem: representing recursive hierarchies Solution: Composite represent recursive hierarchies

e-Macao-18-1-518

e-Macao-18-1-519

Applying Faade
Problem: encapsulating subsystems Solution: Faade reduces dependencies among classes by encapsulating subsystems from with simple unified interfaces

Applying Observer
Problem: decoupling entities from view Solution: Observer allows us to maintain consistency across the state of one publisher and many subscribers

Slides Design
e-Macao-18-1-520 e-Macao-18-1-521

157

Applying Proxy
Problem: encapsulating expensive objects Solution: Proxy improves the performance or the security of a system by delaying expensive computations, until when needed

Applying Strategy
Problem: encapsulating algorithms Solution: Strategy decouples an algorithm from its implementations

e-Macao-18-1-522

e-Macao-18-1-523

Task 53
For each of the following statements, specify the most convenient pattern to apply to the following scenarios: 1) a component on the web tier requires access to business components 2) there a need to provide several buttons on a web form which executes different actions 3) messages need to be sent to citizens each time a typhoon approaches

Summary 1
1) design involves the transformation of analysis models in the problem space into design models in the solution space 2) object design includes: a) service specification for classes b) component selection c) object model restructuring d) object model optimization

Slides Design
e-Macao-18-1-524 e-Macao-18-1-525

158

Summary 2
3) design class diagrams provide specification for software classes and interfaces in an application 4) typical information contained in a Design Class Diagram include: a) classes b) associations c) attributes d) interfaces e) methods f) attribute type information g) navigability h) dependencies

Summary 3
5) activity diagrams models the dynamic aspect of a system by showing the flow from one activity to another 6) activity diagram can be used to describe a workflow or the details of an operation 7) an activity diagram may also show the flow of an object as it moves from one state to another at different points in the flow of control

e-Macao-18-1-526

Summary 4
9) design sequence diagrams specifies message types, temporal constraints, object creation and destruction 10) design statechart diagrams describes detailed the internal behavior of objects 11) design patterns are partial solutions to common problems. They name, abstract and identify the key aspects of common design structure that make them useful for creating reusable object oriented design 12) there are 23 basic patterns as provided by the GoF

Slides Implementation

159

A.7. Implementation

e-Macao-18-1-528

Course Outline
1) Object Orientation 2) UML Basics

Implementation Model

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Implementation
e-Macao-18-1-529 e-Macao-18-1-530

160

Implementation Phase
At this stage it is necessary to implement the design specified in the design models. It also deals with non-functional requirements and the deployment of the executable modules onto nodes. Two models are developed during this phase: 1) the implementation model describing how the design elements have been implemented in terms of software system 2) the deployment model describing how the implemented software should be deployed on the physical hardware

Implementation Model
The implementation model indicates how various aspects of the design map onto the target language. It describes how components, interfaces, packages and files are related. The modelling elements are: 1) packages 2) components 3) their relationships and they are shown in the implementation component diagram.

e-Macao-18-1-531

e-Macao-18-1-532

Modelling Techniques
Component diagrams are used to model the static implementation view of a system. To model this view, it is possible to use component diagrams in one of four ways: 1) 2) 3) 4) to to to to model model model model source code executable releases physical databases adaptable systems

Modelling Source Code

1) Component diagrams are used to model the configuration management of source files, which represent work-product components. 2) Modelling procedure: a) identify the set of source code files of interest and model them as components stereotyped as files b) for larger systems, use packages to show groups of source code files c) consider exposing a tagged value to show interest information such as author, version number, etc. d) model the compilation dependencies among these files using dependencies

Slides Implementation
e-Macao-18-1-533 e-Macao-18-1-534

161

Source Code Files Example

Modelling Executable Releases

1) Component diagrams are used model executable releases, including the deployment components that form each release, and the relationships among those components. 2) Each component diagram focuses on one set of components at a time, such as all components that live on one node. 3) Modelling procedure: a) identify the set of components to model b) consider the stereotype of each component in the set c) for each component, consider its relationship to its neighbors.

e-Macao-18-1-535

e-Macao-18-1-536

Executables Example

Modelling Physical Databases

1) Component diagrams model the mapping of classes into tables of a database. 2) Modelling procedure: a) identify the classes in your model that represent your logical database schema b) select a strategy for mapping these classes to tables, possibly considering the physical distribution c) create a component diagram containing components stereotyped as tables to model the mapping

Slides Implementation
e-Macao-18-1-537 e-Macao-18-1-538

162

Physical Databases Example

Example

e-Macao-18-1-539

e-Macao-18-1-540

Summary
1) The implementation component diagram describes how components, interfaces, packages and files are related. 2) Implementation component diagrams may be used to model source code, executable releases, physical databases and adaptable systems.

Task 54
Provide an possible implementation model for the restaurant license application based on any implementation framework of your choice (.NET, J2EE, etc.). You model should show the major components of the system.

Slides Deployment

163

A.8. Deployment

e-Macao-18-1-541

e-Macao-18-1-542

Course Outline
1) Object Orientation 2) UML Basics

Deployment Model

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Deployment
e-Macao-18-1-543 e-Macao-18-1-544

164

Deployment Diagrams 1
1) show the configuration of run-time processing nodes and the components that live on them. 2) model the distribution, delivery, and installation of the parts that make up the physical system 3) involve modelling the topology of the hardware on which the system executes

Deployment Diagrams 2
4) essentially focus on a systems nodes, and include: a) nodes b) dependencies and associations relationships c) components d) packages

e-Macao-18-1-545

e-Macao-18-1-546

Nodes
1) model the topology of the hardware on which the system executes 2) represent the hardware on which components are deployed and executed 3) may be stereotyped to allows for specific kinds of processors and devices.

Nodes Names
Every node must have a name that distinguishes it from other nodes. A name is a textual string which may be written as a simple name or as a path name.

Simple name

path name

Slides Deployment
e-Macao-18-1-547 e-Macao-18-1-548

165

Nodes and Components

Components 1) participate in the execution of a system. 2) represent the physical packaging of otherwise logical elements Nodes 1) execute components

Organizing Nodes
Nodes can be organized: 1) in the same manner as classes and components 2) by specifying dependency, generalization, association, aggregation, and realization relationships among them. The most common kind of relationship used among nodes is an association representing a physical connection among then.

2) represent the physical deployment of components

The relationship deploys between a node and a component can be shown using a dependency relationship.

e-Macao-18-1-549

e-Macao-18-1-550

Processors and Devices

A processor is a node that has processing capability. It can execute a component. A device is a node that has no processing capability (at least at the level of abstraction showed).

Modelling Nodes
Procedure: 1) identify the computational elements of the systems deployment view and model each as a node 2) add the corresponding stereotype to the nodes 3) consider attributes and operations that might apply to each node.

Slides Deployment
e-Macao-18-1-551 e-Macao-18-1-552

166

Distribution of Components
To model the topology of a system it is necessary to specify the physical distribution of its components across the processors and devices of the system. Procedure: 1) allocate each component in a given node 2) consider duplicate locations for components, if it is necessary 3) render the allocation in one of these ways: a) dont make visible the allocation b) use dependency relationship between the node and the component its deploy c) list the components deployed on a node in an additional compartment

Example

e-Macao-18-1-553

e-Macao-18-1-554

Summary
Deployment diagrams model the topology of the hardware on which the system executes and the software installed on each of the hardware components. Deployment diagrams include nodes, packages, components and their relationships. Deployment diagrams may be used to model different kind of systems such as embedded, client-server or distributed systems.

Task 55:
Consider task 54, show how these components will be deployed at the agency. In your model, annotate the nodes according to described them.

Slides Unified Process

167

A.9. Unified Process

e-Macao-18-1-555

e-Macao-18-1-556

Course Outline
1) Object Orientation 2) UML Basics

Unified Process

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides Unified Process

e-Macao-18-1-557 e-Macao-18-1-558

168

Overview
1) Software Development Process 2) Unified Process Overview 3) Unified Process Structure 1) Building Blocks 2) Phases 3) Workflows

Why a process ?
A process defines: 1) who is doing what 2) when to do it 3) how to reach a certain goal 4) the inputs and outputs for each activity

new or changed requirements

Software Engineering Development Process

new or changed system

e-Macao-18-1-559

e-Macao-18-1-560

Development Process
Is a framework which guides the tasks, people and define output products of the development process. It is a framework because: 1) provides the inputs and outputs of each activity 2) does not restrict how each activity must be performed 3) must be tailored for every project There is no universal process.

Unified Process - Overview

Key elements: 1) iterative and incremental 2) use case-driven 3) architecture-centric

Slides Unified Process

e-Macao-18-1-561 e-Macao-18-1-562

169

Iterative and Incremental 1

The design process is based on iterations that address different aspects of the design process. The iterations evolve into the final system (incremental aspect). The process does not try to complete the whole design task in one go. How to do it? 1) plan a little 2) specify, design and implement a little 3) integrate, test and run 4) obtain feedback before next iteration

Iterative and Incremental 2

Technical risks are assessed and prioritized early and are revised during each iteration.
Define iteration to address the highest risks Plan and develop the iteration Iteration N Assess the iteration Revise project plan Risks eliminated Revise risk assessment

Initial risks Initial project scope

e-Macao-18-1-563

e-Macao-18-1-564

Use Case-Driven
Use cases are used for: 1) identify users and their requirements 2) aid in the creation and validation of the architecture 3) help produce definitions of test cases and procedures 4) direct the planning of iterations 5) drive the creation of user documentation 6) direct the deployment of the system 7) synchronize the content of different models 8) drive traceability throughout models

Architecture-Centric
Problem: with the iterative and incremental approach different development activities are done concurrently Solution: the systems architecture ensures that all parts fit together An architecture is the skeleton on which the muscles (functionality) and skin (user-interface) of the system will be hung.

Slides Unified Process

e-Macao-18-1-565 e-Macao-18-1-566

170

Unified Process - Structure

Two dimensions: 1) time division on the life cycle into phases and iterations

The Development Process

2) process components

production of a specific set of artifacts with welldefined activities called workflows

e-Macao-18-1-567

e-Macao-18-1-568

Building Blocks
Cycles Cycles Phases Phases

Life Cycle Phases

Phases and major deliverables of the Unified Process

activities define detailed work and are combined in workflows workflows are organized into iterations
Iterations Iterations Workflows Workflows Activities Activities

Inception

Elaboration

Construction

Transition

vision

baseline architecture

full beta release

final release

each iteration identifies some aspect of the system and are organized into phases phases can be grouped into cycles cycles focus on the generation of successive releases

Slides Unified Process

e-Macao-18-1-569 e-Macao-18-1-570

171

Inception
Focuses on the generation of the business case that involves: 1) identification of core uses cases 2) definition of the actual scope 3) identification of risky difficult parts of the system The main objectives are: 1) to prove the feasibility of the system to be built 2) to determine the complexity involved in order to provide reasonable estimates Outputs: 1) the vision of the system 2) very simplified use case model 3) tentative architecture 4) risks identified 5) plan for the elaboration phase
e-Macao-18-1-571

Elaboration
Involves: 1) understanding how requirements are translated into the internals of the system 2) producing the baseline architecture 3) capturing the majority of the use cases 4) exploring further the risks identified earlier and identifying the most significant 5) specifying any non-functional requirements specially those related to reliability and performance Outputs: 1) the systems architecture 2) detailed use case model 3) set of plans for the construction phase
e-Macao-18-1-572

Construction
Involves: 1) completing the analysis of the system 2) performing the majority of the design and the implementation Outputs: 1) implemented software product as a full beta release. It may contain some defects 2) associated models An important aspect for the success of this phase is to monitor the critical aspects of the projects, specially significant risks.

Transition
Involves: 1) deployment of the beta system 2) monitoring user feedback and handling any modifications or updates required Output: 1) the formal release of the software

Slides Unified Process

e-Macao-18-1-573 e-Macao-18-1-574

172

UP - Workflows 1
1) requirements: focuses on the activities which allow to identify functional and non-functional requirements 2) analysis: restructures the requirements identified in terms of the software to be built 3) design: produces a detailed design

Workflows and Phases

Inception Elaboration

requirements

Construction

analysis

5) test: describes the activities to be carried out for testing

implementation

4) implementation: represents the coding of the design in a programming language, and the compilation, packaging, deployment and documentation of the software

design

Transition

e-Macao-18-1-575

e-Macao-18-1-576

Phases and Iterations

The iterations of workflows occur one or more times during a phase.

Workflows and Activities

Workflows Requirements Activities Find actors and use cases, prioritize use cases, detail use cases, prototype user interface, structure the use case model Architectural analysis, analyze use cases, explore classes, find packages Architectural design, trace use cases, refine and design classes, design packages

Analysis Design

Implementation Architectural implementation, implement classes and interfaces, implement subsystems, perform unit testing, integrate systems Test Plan and design tests, implement tests, perform integration and system tests, evaluate tests

test

Slides Unified Process

e-Macao-18-1-577 e-Macao-18-1-578

173

Workflows and Models

Requirements Use case model Analysis model Design model Environment model Test model Implementation model

Summary 1
A software development process is a framework that provides guidance to carry out the different activities needed to produce a software product. Every software development process must be parameterized for each individual project. There is no universal process.

Analysis

Design

Implementation

Test

e-Macao-18-1-579

Summary 2
The main 1) 2) 3) features of the Unified Process are: use case-driven architecture-centric iterative and incremental

With respect to time dimension, the lifecycle is divided into phases and iteration. There are four main phases: inception, elaboration, construction and transition. A specific set of artifacts are produced with well-defined activities called workflows. There are five main workflows: requirements, analysis, design, implementation and test.

Slides UML Tools

174

A.10. UML Tools

e-Macao-18-1-581

Course Outline
1) Object Orientation 2) UML Basics

UML Tools

3) UML Modelling: a) Requirements b) Architecture c) Design d) Implementation e) Deployment 4) Unified Process 5) UML Tools

UML Diagrams: 1. use case 2. class 3. object 4. sequence 5. state 6. component 7. collaboration 8. activity 9. deployment

Slides UML Tools

e-Macao-18-1-582 e-Macao-18-1-583

175

Overview
1) Why UML CASE tools? 2) Benefits 3) Different tools 4) Evaluating UML CASE tools 5) Main Features of: a) Enterprise Architect b) MagicDraw c) Poseidon d) Rational Rose

Why UML CASE Tools

1) tools offer benefits to everyone involved in a project: a) analysts can capture requirements with use case model b) designers can produce models that capture interactions between objects c) developers can quickly turn the model into a working application 2) UML case tool, plus a methodology, plus empowered resources enable the development of the right software solution, faster and cheaper

e-Macao-18-1-584

e-Macao-18-1-585

Different UML CASE Tools

Tools vary with respect to: 1) 2) 3) 4) 5) 6) 7) 8) 9) UML modelling capabilities project life-cycle support forward and reverse engineering data modelling performance price supportability easy of use

Evaluating CASE Tools

Different Criteria for evaluating CASE tools: 1) repository support 2) round-trip engineering 3) HTML documentation 4) UML support 5) data modelling integration 6) versioning 7) model navigation 8) printing support 9) diagrams views 10) exporting diagrams 11) platform

Slides UML Tools

e-Macao-18-1-586 e-Macao-18-1-587

176

Different UML Tools

Enterprise Architect organization: Sparx Systems web-site: http://www.sparxsystems.com.au/ MagicDraw organization: No Magic Inc. web-site: http://www.nomagic.com/ Poseidon organization: Gentleware web-site: http://www.gentleware.com/ Rational Rose organization: IBM web-site: http://www-306.ibm.com/software/rational/

Enterprise Architect
Criteria Platform UML Compliance Usability Development Environment Outputs & Code Generation Data Repository Other features Features Windows Support for all 13 UML 2.0 diagrams Replication capable Comprehensive and flexible documentation Multi-user enabled Allows to replicate and share projects C++, Java, C#, VB, VB.Net, Delphi, PHP HTML and RTF document generation - Forward and reverse database engineering Models are stored in a data repository - Checks data integrity in the data repository Provides a project browser Allows scripting to extend functionality Project estimation tools User definable patterns

e-Macao-18-1-588

e-Macao-18-1-589

Magic Draw
Criteria Platform UML Compliance Usability Development Environment Outputs & Code Generation Data Repository Other features Features Any where Java 1.4 is supported Support for UML 1.4 notation and semantics Replication capable Customizable views of UML elements Customizable elements properties Multi-user enabled Lock parts of the model to edit Commit changes Model versioning and rollback Code generation and reverse engineering to C++, Java, C# - RTF and PDF document generation Provides a project browser Friendly and customizable GUI Hyperlinks can be added to any model element

Poseidon
Criteria Platform UML Compliance Usability Development Environment Outputs & Code Generation Data Repository Other features Features Platform independent Implemented in Java Supports all 9 diagrams of UML 1.4 Replication capable Internationalization an localization for several languages Collaborative environment based on client-server architecture Locking of model parts Secure transmission of files VB.Net, C#, C++, CORBA IDL, Delphi, Perl, PHP, SQL DDL Round trip engineering for Java Diagram export as gif, ps, eps and svg. Uses MDR (Meta Data Repository) developed by Sun and based on the JMI (Java Metadata Interface) standard Allows to import Rational Rose files

Slides UML Tools

e-Macao-18-1-590 e-Macao-18-1-591

177

Rational Rose
Criteria Platform UML Compliance Usability Development Environment Outputs & Code Generation Data Repository Other features Features Windows Not fully supported UML 1.4 The add-in feature allows to customize the environment User configurable support for UML, OMT and Booch 93. Parallel multi-user development through repository and private support C++, Visual C++, VB6, Java Documentation generation Round trip engineering Maintains consistency between the diagram and the specification, you may change any of them and automatically updates the information. Can be integrated with other Rational products such as RequisitePro, Test Manager

Summary
There exist several CASE Tools supporting Object Oriented modelling with UML. Different criteria should be considered when evaluating a software tool. Four tools were presented: Enterprise Architect, Magic Draw, Poseidon and Rational Rose.

Slides Summary

178

A.11. Summary

e-Macao-18-1-593

Object Orientation
Object Orientation is about viewing and modelling the world/system as a set of interacting and interrelated objects. Four principles:

Course Summary

1) abstraction 2) encapsulation 3) modularity 4) hierarchy

Slides Summary
e-Macao-18-1-594 e-Macao-18-1-595

179

Object Oriented Concepts

Object Class Attribute Operation Interface Implementation Association Aggregation Composition Generalization Super-class / Sub-class Abstract class / Concrete-class Discriminator Polymorphism Realization

UML Basics
Unified Modeling Language standard published by OMG Building Blocks: 1) elements 2) relationships 3) diagrams

e-Macao-18-1-596

e-Macao-18-1-597

UML Elements 1
Structural: 1) 2) 3) 4) 5) 6) 7) class interface collaboration use case active class component node

UML Elements 2
Behavioural: 1) interactions 2) state-machines Grouping: 1) package Annotation: 1) notes

Slides Summary
e-Macao-18-1-598 e-Macao-18-1-599

180

UML - Diagrams
Static 1) 2) 3) 4) Class Object Component Deployment Dynamic 1) 2) 3) 4) 5) Use Case Sequence Collaboration Statechart Activity

Use Case Diagram

Shows the functions of the system (external view). Components: 1) use cases 2) actors 3) relationships: a) use cases: generalization dependency: include, extend b) actors: generalization c) use cases actors: association

e-Macao-18-1-600

e-Macao-18-1-601

Class Diagram
Shows the classes and their relationships. Main components: 1) classes attributes types, default value operations arguments, results 2) relationships association aggregation multiplicity composition roles generalization dependency

Object Diagram
Shows the instances for a given class diagram in a point of time. Components: 1) objects 2) links

visibility

Slides Summary
e-Macao-18-1-602 e-Macao-18-1-603

181

Sequence Diagram
Shows interactions between objects (ordered in time). Main components: 1) object lifelines: object lifeline 2) interactions - messages

Statechart Diagram
Shows the state of an object(s) in response to events. Main components: 1) states: pseudo-states: initial final static/dynamic branch points simple states composite states mutually exclusive sub-states concurrent sub-states 2) events

e-Macao-18-1-604

e-Macao-18-1-605

Collaboration Diagrams
Shows interaction between objects (ordered in time). Main components: a) classes associations objects links b) messages

Activity Diagram
Focuses on the internal execution of activities. Main components: 1) states 2) transitions 3) decisions 4) forks joins 5) swimlanes

Slides Summary
e-Macao-18-1-606 e-Macao-18-1-607

182

Component Diagram
Shows structural replaceable parts of the system. Main components: 1) components 2) interfaces 3) packages

Deployment Diagram
Shows the nodes and components of the system. Main components: 1) nodes: processor devices 2) components 3) packages

e-Macao-18-1-608

e-Macao-18-1-609

Development Stages
1) Requirements requirements modelling 2) Analysis 3) Design architecture and detailed design

Development 1
Requirements Modelling: functional and non-functional requirements template and glossary diagrams: 1) use case diagram 2) class diagram 3) sequence diagram 4) statechart diagram

4) Implementation 5) Deployment

Slides Summary
e-Macao-18-1-610 e-Macao-18-1-611

183

Development 2
Architecture: concepts: subsystem cohesion coupling layering diagrams: collaboration diagram component diagram architecture styles: repository MVC client-server

Development 3
Design: activities diagrams: class diagrams activity diagrams sequence diagrams statecharts diagrams patterns

e-Macao-18-1-612

e-Macao-18-1-613

Development 4
Implementation: diagram: component diagram

Development 5
Deployment: diagram: deployment diagram

Slides Summary
e-Macao-18-1-614 e-Macao-18-1-615

184

Unified Process
1) iterative and incremental 2) use case-driven 3) architecture-centric

UP Workflows
1) Requirements 2) Analysis 3) Design 4) Implementation 5) Test

e-Macao-18-1-616

UML Tools
Magic Draw Rational Rose Poseidon Enterprise Architect

The End

Slides Summary
e-Macao-18-1-618

185

Acknowledgements
We would like to thank Dr. Tomasz Janowski and all the members of the eMacao team for their valuable comments and help in preparing this material.

Assessment

186

B. Assessment B.1. Set 1

Divide a complex system into small, self-contained pieces that can be managed independently. How is it called? a Abstraction b Modularity c Encapsulation d Hierarchy Answer: B In order to model the relationship a course is composed of 5 to 20 students and one or more instructors, you could use: a Aggregation b Association c Composition d Realization Answer: A Which of the following statements are true? a All operations defined in a sub-class are inherited by the super-class b Generalization allows abstracting common features and defining them in a super-class c A super-class is a class that must not have associations d Association is a part-of relationship Answer: B What is the relationship between these two use cases? a Generalization b Extend c Include d Association Answer: C The following diagram shows that there is an interaction between: a An object of ClassA and an object of ClassB b An object of ClassA and object z of ClassB c Object z of ClassB and an object of ClassB d An object of ClassC and an object of ClassA Answer: B

Assessment

187

Which of the following statements are true for the following diagram? a State1 is always the first state of the c State3 is always the last state of object after the initial state the object before the final state b State2 is always the last state of the d During its life, the object is in at object before the final state least five states Answer: C

How many Files objects for each Directory object? a 0 or 1 b 2 c 1 or 2 d Many Answer: C Which of the following statement is true for the following diagram a A is a kind of B b B is a kind of B c A is part of B d B depends on A Answer: None Which of these diagrams shows interactions between objects? a Activity diagram b Class diagram c Sequence diagram d Component diagram Answer: C A statechart diagram describes: a Attributes of objects b Nodes of the system c Operations executed on a thread d Events triggered by an object Answer: D An interface is: a A set of objects used to provide a specific behaviour b A set of classes used on a collaboration c A set of attributes used on an operation d A set of operations used to specify a service of a class or component Answer: D

10

11

Assessment

188

12

The sequence diagram models: a The order in which the class diagram is constructed b The way in which objects communicate c The relationship between states d The components of the system Answer: B The activity diagram: a Focuses on flows driven by internal processing b Models the external events stimulating one object c Focuses on the transitions between states of a particular object d Models the interaction between objects Answer: A The deployment diagram shows: a Objects of a system b Distribution of components on the nodes in a system c Functions of a system d Distribution of nodes Answer: B Unified Process is a software development methodology which is: a Use-case driven b Component-driven c Related to Extreme Programming d None in only one iteration Answer: A

13

14

15

Assessment

189

B.2. Set 2 1 Ordering abstractions into a tree-like structure. How is it called? a Abstraction b Modularity c Encapsulation d Hierarchy Answer: D In order to model the relationship a hotel has rooms, between Hotel and Room, you could use: a Aggregation b Association c Composition d Realization Answer: C Which of the following statements are true? a All operations defined in a super-class are inherited by the sub-class b Generalization allows abstracting common features and defining them in a subclass c A super-class is a class that must not have associations d Association is a kind-of relationship Answer: A What is the relationship between these two use cases? a Include b Extension c Generalization d Association Answer: C The following diagram shows that there is an interaction between: a An object of ClassC and an object of ClassA b Object z of ClassB and an object of ClassB c An object of ClassA and object z of ClassB d An object of ClassA and an object of ClassC Answer: C 6 Which of the following statements are true for the following diagram? a State2 is always the first state of the c State3 is always the last state of object after the initial state the object before the final state b State1 is always the last state of the d During its life, the object is in at object before the final state least five states Answer: C

Assessment

190

How many Files objects for each Directory object? a 0 or 2 b 0 or 1 c 1 or 2 d Many Answer: C Which of the following statement is true for the following diagram a B is a kind of A b A is part of B c A is a kind of B d B depends on A Answer: A Which of these diagrams shows interactions between objects? a Sequence diagram b Class diagram c Activity diagram d Component diagram Answer: A A statechart diagram describes: a Operations executed on a thread b Nodes of the system c Attributes and operations of an object d Events triggered by an object Answer: D An interface is: a A set of classes used on a collaboration b A set of operations used to specify a service of a class or component c A set of attributes used on an operation d A set of objects used to provide a specific behaviour Answer: B The sequence diagram models: a The order in which the class diagram is constructed b The relationship between objects c The way in which objects communicate d The components of the system Answer: C The activity diagram: a Models the interaction between objects b Models the external events stimulating one object c Focuses on the transitions between states of a particular object d Focuses on flows driven by internal processing Answer: D

10

11

12

13

Assessment

191

14

The deployment diagram shows: a Objects of a system b Functions of a system c Distribution of components on the nodes in a system d Distribution of nodes Answer: C Unified Process is a software development methodology which is: a Component-driven b Iterative and incremental c Related to Extreme Programming d Done in only one iteration Answer: B

15