Scribd
Upload
308 views

Demag - STK Designer

The document summarizes the key dimensions and configuration of a bridge crane designed using Demag's crane designer software. It provides measurements for the crane girder, end carriage, crab, and notes that the minimum dimensions were determined based on standard crane components. The information was calculated using the project details, and other options may produce different results. Project engineers are available to review selections and advise on appropriate configurations.

Uploaded by

mehmetaliozgur
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
308 views

Demag - STK Designer

The document summarizes the key dimensions and configuration of a bridge crane designed using Demag's crane designer software. It provides measurements for the crane girder, end carriage, crab, and notes that the minimum dimensions were determined based on standard crane components. The information was calculated using the project details, and other options may produce different results. Project engineers are available to review selections and advise on appropriate configurations.

Uploaded by

mehmetaliozgur
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Demag - STK Designer

http://cranedesigner.demagcranes.com/CD/content/baumasse_ergeb_prin...

Home > Unnamed Project > Basic Data > Crane Configuration > End Results

Dimensions
EPDE 2t x 10000mm
Crane
Girder Style: Bridge X1: Bridge X2: Cranebridge h4 Bridge U: Overhang E: Overhang F: Std 1 199 mm 199 mm 210 mm 500 mm 248 mm 248 mm

Important Information
The crane designer has calculated these results using the information provided. Other dimensional chracteristics can be obtained using other options. It is possible to select options which don't correspond with the dimensions given. Our project engineers would be more than happy to check your selections and give advice on more appropriate selections.

End Carriage
d: End carriage R1: eKT: LeKT: Buffer Type: End carriage bminE: End carriage bminF: 125 mm 128 mm 2000 mm 2620 mm DPZ 100 348 mm 348 mm

Crab
Long Travel Rail Height y: Hook to LT Rail Height g: Hook Approach lan1: Hook Approach lan2: 1665 mm 1147 mm 475 mm 495 mm

Das Ma bminE/F wurde ermittelt fr eine Kranstromzufhrung (DCL) downshop conductor is located, based upon standard components on crane side 1.

1 -> 2

26.09.2011 09:53

Demag - STK Designer

http://cranedesigner.demagcranes.com/CD/content/baumasse_ergeb_prin...

Gedruckt von: Int_DE, 26.09.2011, 08:59

2 -> 2

26.09.2011 09:53

You might also like