Scribd
Upload
155 views7 pages

CH 7 Soln (Our Book)

Uploaded by

Georgia McLendon
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
155 views7 pages

CH 7 Soln (Our Book)

Uploaded by

Georgia McLendon
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 7
1-39 The lever is held to the fixed shaft using @ tapered pin AB, which has a mean diameter of § mm. If a couple is applied to the lever, determine the average shear stress in the pin between the pin and lever. gy om i O IZ mm i ) 250mm TF 2 Soman | 20" Zo" = 290mm. + 250 mm aon 2N ‘ y F(12)~20(500)=0; F = 833.33N "1-40 The supporting wheel on a scaffold is held in place ‘on the leg using a 4 mm-diameter pin as shown Ifthe wheel is subjected to a normal force of 3 KN, determine the aver age shear stress developed in the pin, Neglect friction between the inner scaffold puller leg and the tube used on the wheel +T ZR =0, 2V=0, V=LSKN Vases frp =e ao IEPA Ans A £0,004 1-83 “The joint is subjected to the axial member force of 6 kip. Determine the average normal stress acting on see tions AB and BC, Assume the member is smooth and is LS in thick +T IR =0; — -6sin 60° +Ngc cos 20° Nac = 5.530 kip Nan ~ 6 cos 60° = 5.530 sin 20° Nao = 4.891 kip Parepaee dees easyer etry ry Aaa .5)2) Sac = 0.819 ksi Ans I-57 Rods AB and BC have diameters of 4 mm and 6 mm, fespectively. If the vertical load of 8 Nis applied to the ring at B, determine the angle @ of rod BC so that the average ‘normal stress in each rod is equivalent. What is this stoss? Fag = Aan = oC )(0.002) Frc = Cac = 0 )(0.003)° S2R =O; o(7)(0.00 +TZF=0; — o7(0.003")sin @-8(10°) = 0 From Eq. (1) : 0 = 63.6° Ans From Eq. (2) 80") 1 (0.003)?sin 63.6° = 316MPa Ans 0s 6- on (0.0027) =0 ay (2)

You might also like