0% found this document useful (0 votes)
67 views4 pages

Amr Moc Call Flow

The document outlines the call procedure for an AMR voice call over an LTE network. It involves the following key steps: 1. The UE establishes an RRC connection with the NodeB and synchronization is achieved. 2. Authentication and security setup occurs between the UE, RNC and core network. 3. The call is established with call setup signaling exchanged between the UE, RNC and core network. 4. Radio resources are allocated and the user plane connection is established. 5. Upon call termination, the radio resources are released and the RRC connection is released.

Uploaded by

Balendu Sekhar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
67 views4 pages

Amr Moc Call Flow

The document outlines the call procedure for an AMR voice call over an LTE network. It involves the following key steps: 1. The UE establishes an RRC connection with the NodeB and synchronization is achieved. 2. Authentication and security setup occurs between the UE, RNC and core network. 3. The call is established with call setup signaling exchanged between the UE, RNC and core network. 4. Radio resources are allocated and the user plane connection is established. 5. Upon call termination, the radio resources are released and the RRC connection is released.

Uploaded by

Balendu Sekhar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

L3 Messages - AMR Voice (MOC) Call Procedure

UE NodeB
1.RRC: RRC Connection Request (RACH) 2.NBAP:Radio Link Setup Req Start Rx 3.NBAP:Radio Link Setup Resp. 4.ALCAP: Iub User Plane Setup RRC Connection Establishment Timing Start Tx

S-RNC

CN

5.RRC: RRC Connection Setup (FACH) L1 Synchonization NBAP:Synchonization Indicator 6.RRC: RRC Connection Setup Completed (DCH)

1.RRC: Initial Direct Transfer (MM: CM Service Request) SCCP: CR (Connection Request) 2.RANAP: Initial UE Message (MM: CM Service Request) 3.SCCP: CC (Connection Confirm) 1.RANAP: Direct Transfer (MM: Authentication Request) 2.RRC: Downlink Direct Transfer (MM: Authentication Request) 3.RRC: Uplink Direct Transfer (MM: Authentication Response)

4.RANAP: Direct Transfer (MM: Authentication Response) RANAP: Common ID (IMSI) 5.RANAP: Security Mode Command 6.RRC: Security Mode Command 7.RRC: Security Mode Completed 8.RANAP: Security Mode Complete 1.RRC: Uplink Direct Transfer (CC: Setup) 2.RANAP: Direct Transfer (CC: Setup) 3.RANAP: Direct Transfer (CC: Call Proceeding) 4.RRC: Downlink Direct Transfer (CC: Call Proceeding) 1.RANAP: RAB Assignment Request 2.ALCAP : Iu User Plane Setup 3.NBAP: Radio Link Reconfiguration Prepare 4.NBAP: Radio Link Reconfiguration Ready 5.ALCAP: Iub User Plane Setup 6.RRC: Radio Bearer Setup 7.NBAP: Radio Link Reconfiguration Commit Apply new transport format set 8.RRC: Radio Bearer Setup Complete 9.RANAP: RAB Assignment Response

5. Radio Bearer Setu

6.RANAP: Direct Transfer (CC: Alerting) 7.RRC: Downlink Direct Transfer (CC: Alerting) 8.RANAP: Direct Transfer (CC: Connect) 9.RRC: Downlink Direct Transfer (CC: Connect) 10.RRC: Uplink Direct Transfer (CC: Connect Acknowledge) 11.RANAP: Direct Transfer (CC: Connect Acknowledge)

Call Established
RRC:Measurement Control RRC:Measurement Report Intra-Frequency Soft Handover

Inter-Frequency Hard Handover Inter-RAT Hard Handover

1.RRC: Uplink Direct Transfer (CC: Disconnect) 2.RANAP: Direct Transfer (CC: Disconnect) 3.RANAP: Direct Transfer (CC: Release) 4.RRC: Downlink Direct Transfer (CC: Release) 5.RRC: Uplink Direct Transfer (CC: Release Complete) 6.RANAP: Direct Transfer (CC: Release Complete) 7.RANAP: Iu Release Command

8.ALCAP: Iu User Plane Release 9.RANAP: Iu Release Complete 1.RRC: RRC Connection Release 2.RRC: RRC Connection Release Complete 2.RRC:RRC Connection Release Complete 3.NBAP: Radio Link Deletion Request 4.NBAP: Radio Link Deletion Response 5,.ALCAP: Iub User Plane Release

You might also like