Scribd
Upload
88 views

Readme

This document provides instructions for installing Pro/Engineer, Pro/Mechanica, and Pro/Distributed Services software. It describes editing license files to add a MAC ID, selecting a nodelocked license during installation, applying patches, and pointing installers to specific folders to resolve missing file errors during the process.

Uploaded by

Gió Mùa Thu
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
88 views

Readme

This document provides instructions for installing Pro/Engineer, Pro/Mechanica, and Pro/Distributed Services software. It describes editing license files to add a MAC ID, selecting a nodelocked license during installation, applying patches, and pointing installers to specific folders to resolve missing file errors during the process.

Uploaded by

Gió Mùa Thu
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

.boot up your pc with windows .start pro/e setup .open ptc_licfile.dat with your fav txt-editor .

replace every occurance of 00-00-00-00-00-00 with the one shown in the bottom l eft corner of the Pro/e setup (its your mac-id, format: xx-xx-xx-xx-xx) .install pro/e - pro/m - pro/ds, i dont care which one or in which order .on license-config screen select "nodelocked license" and point to edited ptc_li cfile.dat .blalala install next for pro/engineer: (if u didnt install the complete package, u get "missing file" errors, accept or bleed) .run ptc.pro engineer.wildfire.4.0-patch.exe, point to <installdir>\i486_nt\obj folder .edit <pro/e installdir>\bin\proev.bat change "%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr%" in "%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr% PTC_KEY=0" (add PTC_KEY=0) pro/mechanica: .run ptc.pro mechanica.wildfire.4.0-patch.exe .point to <pro/m installdir>\i486_nt\bin proeWildfire 5.0\mech\i486_nt\bin <pro/m installdir>\i486_nt\obj <pro/m installdir>\i486_nt\ptc (in this order, after every "missing file" error) pro/distributed services: .run ptc.distributed.services.4.0-patch.exe and point to <pro/ds installdir>\i48 6_nt\obj

You might also like