Scribd
Upload
421 views1 page

PST 21 FH Hydro Hydraulic Packer

The "FH" packer is a retrievable packer that can be set hydraulically or hydrostatically, allowing the tubing to remain in a neutral position after setting. It is suitable for multi-zone production in deviated wells and where the wellhead is installed before setting. The packer sets through differential pressure and releases through either straight pull or optional rotation after shearing a release ring.

Uploaded by

jainendra_ism
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
421 views1 page

PST 21 FH Hydro Hydraulic Packer

The "FH" packer is a retrievable packer that can be set hydraulically or hydrostatically, allowing the tubing to remain in a neutral position after setting. It is suitable for multi-zone production in deviated wells and where the wellhead is installed before setting. The packer sets through differential pressure and releases through either straight pull or optional rotation after shearing a release ring.

Uploaded by

jainendra_ism
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Retrievable Packers

FH Hydrostatic/Hydraulic Packer
The FH is a Hydrostatic and/or Hydraulic Set Packer that allows the tubing to be left in a compression or neutral condition. Applications Multi-zone production in crooked or deviated holes not suitable for mechanical packers Installations where the wellhead is flanged up before the packer is set Features No tubing manipulation required Withstands high hydrostatic pressures Hydraulic set for low hydrostatic head wells Locked in pack-off force No mandrel movement during setting Straight pull or optional rotational release Hydraulic hold-down for differential pressure from below Parts interchangeable with other manufacturers Setting Procedure The FH Hydrostatic/Hydraulic Packer is set by pressuring the tubing to obtain a differential at the packer. To accomplish this, a means of temporarily plugging the tubing below the packer must be provided. Releasing Procedure The standard FH is a Hydrostatic and/or Hydraulic Set Packer and is equipped with 30,000 lbs. shear ring for a straight upstrain release. Other values of shear rings are available (20,000 to 40,000 lbs. for size 4-1/2 and 20,000 to 50,000 lbs. for all sizes 5-1/2 thru 9-5/8). (see specification chart on back)

Packers & Service Tools

21

You might also like