Scribd
Upload
73 views

CODES Consultants, Inc.: Design of Column (C2)

This document summarizes the design of column C2 for the Casimiro Ynares Memorial Hospital project. It outlines the design specifications, materials used, and calculations for shear reinforcement. The calculations determine the permissible shear the concrete can carry, the shear to be carried by secondary bars, the required and minimum spacing of the secondary bars, and the maximum allowed spacing. Based on the calculations, the summary design is four-legged ø12mm ties spaced at 740mm on center.

Uploaded by

Jason Guzman
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
73 views

CODES Consultants, Inc.: Design of Column (C2)

This document summarizes the design of column C2 for the Casimiro Ynares Memorial Hospital project. It outlines the design specifications, materials used, and calculations for shear reinforcement. The calculations determine the permissible shear the concrete can carry, the shear to be carried by secondary bars, the required and minimum spacing of the secondary bars, and the maximum allowed spacing. Based on the calculations, the summary design is four-legged ø12mm ties spaced at 740mm on center.

Uploaded by

Jason Guzman
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project :

CASIMIRO YNARES MEMORIAL HOSPITAL Date :


Rodriguez (Montalban), Rizal

CODES Consultants, Inc.


CONSULTING ENGINEERS * PLANNERS * PROJECT MANAGERS

19-Oct-11 Page No. : / Drawing No. : /

Description :

DESIGN OF COLUMN (C2)


Prepared by : BAP Checked by : RPB Shear Reinforcement

I.] DESIGN SPECIFICATIONS : 1.1 National Structural Code of the Philippines (NSCP), Volume II - Bridges 2nd Edition, 1997

b = 500

1.2 American Association of State Highway and Officials (AASHTO), Sixteenth Edition, 1996
( Input Data ) II.] MATERIALS : 2.1 Concrete : Compressive Strength, Column Width, Depth, Cover to Main Bars, 2.2 Deformed Bars : Main Bars Diameter,

f'c b h c Db

= = = = =

20.700 500.000 500.000 62.500 28.000 8.000 12.000 4.000 276.000 0.850 68.190

MPa mm mm mm mm pc mm pc MPa kN

Number of Bars, Sec. Bars Yield Strength, Shear, Shear Force, Diameter, Number of Legs, 2.3 Red'n. Factors 2.4 Factored Forces : :

Nb = Ds = Ns fy Vu = = = =

III.] CALCULATIONS : 3.1 Permissible Shear on Concrete 1/2 Vc = (1/6)(b*d)(f'c) / 1000 NSCP (8-51) Vc = 156.018 kN 3.2 Shear to be Carried by the Secondary Bars Vs = Vn - Vc NSCP (8-47)

where :

d = h - c - Ds - Db/2 d = 411.500 mm Vn = Vu / Vn = 80.224 Av = Ns * As Av = 452.389

where : kN Vs = -75.794 3.3 Required Spacing Sreq = (Av*fy*d) / (Vs*1000) NSCP (8-53) where : mm Sreq = -677.88 3.4 Spacing due to Minimum (A v) Smin = (3*Av*fy) / b NSCP (8-64) mm 749.157 = 3.5 Maximum Spacing (NSCP Articles 8.19.3, 8.16.6.3.8 &8.18.2.3) Smax = Min. [ d/4 or 600mm ] for V s < 2(Vc) 100.000 mm = Use : 12mm - 4 ( Legged ) Ties @ 740mm O.C

kN

mm

IV.] DRAWINGS / DETAILS : 500

8 - 25mm w/ 12mm Ties ( 2/Set ) @ 200mm O.C.

500

h = 500
2

You might also like