Scribd
Upload
115 views

K-TEC 85 S / 110 S: Clamping Unit 85 / 110

1) The K-TEC 85 S/110 S clamping unit has a clamping force of 850/1,100 kN with a tie bar clearance of 470 x 470 mm and clamping platens size of 690 x 690 mm. 2) The injection unit has a screw diameter of 85/110 mm, injection pressure of up to 265 bar, and injection rate of up to 2.292/2.240 kg/s. 3) Additional specifications include machine dimensions of 4.95 x 1.56 x 1.96 m, a net weight of 5,300/5,500 kg, and optional configurations for a second injection unit.

Uploaded by

zwacki874781
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
115 views

K-TEC 85 S / 110 S: Clamping Unit 85 / 110

1) The K-TEC 85 S/110 S clamping unit has a clamping force of 850/1,100 kN with a tie bar clearance of 470 x 470 mm and clamping platens size of 690 x 690 mm. 2) The injection unit has a screw diameter of 85/110 mm, injection pressure of up to 265 bar, and injection rate of up to 2.292/2.240 kg/s. 3) Additional specifications include machine dimensions of 4.95 x 1.56 x 1.96 m, a net weight of 5,300/5,500 kg, and optional configurations for a second injection unit.

Uploaded by

zwacki874781
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

K-TEC 85 S / 110 S

Clamping Unit kN mm mm mm mm mm kg kN kN mm s - mm Clamping Force Tie Bar Clearance (H x V) Clamping Platens Size (H x V) Mold Opening Stroke Distance Between Platens max. Mold Installation Height min./max. Mold Weight max. (movin xed) Opening Force Ejector Force Ejector Stroke Dry Cyle (Euromap 6) 1) Injection Unit mm bar g mm mm kN min -1 g/s L/D qty kW Screw Diameter Injection Pressure max. Stroke Volume max. Injected Weight max. (PS) Screw Stroke Unit Stroke Nozzle Holding Force Injection Rate Screw Speed Recovery Rate 2) Active Screw Length3) Number of Heating Zones Total Heating Capacity General Data kW m kg l
1) 2)

85 / 110 850 / 1.100 470 x 470 690 x 690 550 800 250 / 800 / 400 52 50 150 2 - 329 265 30 2.292 99 90 35 1.964 135 123 140 240 47 380 400 20 20 4+1 10,4 85 / 110 - 265
4)

493 40 1.504 176 160 40 2.240 201 183 45 1.936 254 231 160 290 47 720 260 28 21,4 4+1 14,5 85 / 110 - 493 29 31 32 4,95 x 1,56 x 1,96 5.500 290 32 50 1.568 314 286

280 15 20 6,4

495 28 17,3 10,4

570 19 20 12,7

885 35 19,3 14,5

Total Connected Power Machine Dimensions (L x W x H) Net Weight Oil Tank Capacity Stroke = 70% Tie Bar Clearance, 70% Clamping Force For PS: 10 s Cycle Time, 1,5 D Screw Stroke 3) Other L/D on Request 4) According to Ferromatik Milacr ion 5) Option

26

29 4,95 x 1,56 x 1,96 5.300 290

2nd Injection Unit Optional with Position 111 : V - H - PB - VM mm 265 : V - H - PB - VM mm 30 35 40 mm Screw Diameter 18 25 30 mm Screw Diameter

2nd Injection Unit Optional with Position V H PB T VM HM = = = = = = Vertical Horizontal Piggy Back Traversing Vertical Monosandwich Horizontal Monosandwich

You might also like