0% found this document useful (0 votes)
15 views

System Reboots.

The document provides instructions for entering the BIOS setup on a Dell computer and resetting the keyboard lights: 1) Press F2 during early startup to access BIOS setup; 2) Once in BIOS, press Fn + left arrow + down arrow to turn on all keyboard lights; 3) Press F10 + F8 simultaneously to reset the keyboard lights so that only one beep is heard upon restarting the computer.

Uploaded by

Tilawe Mavuto
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
15 views

System Reboots.

The document provides instructions for entering the BIOS setup on a Dell computer and resetting the keyboard lights: 1) Press F2 during early startup to access BIOS setup; 2) Once in BIOS, press Fn + left arrow + down arrow to turn on all keyboard lights; 3) Press F10 + F8 simultaneously to reset the keyboard lights so that only one beep is heard upon restarting the computer.

Uploaded by

Tilawe Mavuto
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 1

OK - I found it on the Dell site. FYI 1.

Enter system setup by pressing the key while the system is booting up. NOTE: Pressing the key to early in the post process will result in a keyboard failure message and waiting to late will result in the operating system loading. 1. Watch for the lights on the keyboard to light up and then turn off. 2. After the lights turn off start tapping the key rapidly until you enter the BIOS. 2. Once in the system setup, turn on all the lights on the keyboard by pressing the key, key, and the key. 3. Press the and keys at the same time. You'll hear a system beep if done correctly. 4. Press the and keys at the same time. You should only hear one beep. If you hear multiple beeps, repeat this step until only one beep is heard. 5. Press the and keys at the same time. The system reboots. ******

You might also like