Scribd
Upload
15 views

Sample Final

The document contains 6 questions regarding linear control systems: 1. Conditions for stability of a 2D system and determining its transition matrix 2. Identifying transfer functions from block diagrams 3. Analyzing the step response of a compensated system using a lag controller 4. Analyzing root loci and stability for various values of a gain parameter 5. Analyzing stability from a Nyquist plot 6. Designing a controller to meet specifications for ramp error constant and phase margin from a given Bode diagram

Uploaded by

magsina
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

Sample Final

The document contains 6 questions regarding linear control systems: 1. Conditions for stability of a 2D system and determining its transition matrix 2. Identifying transfer functions from block diagrams 3. Analyzing the step response of a compensated system using a lag controller 4. Analyzing root loci and stability for various values of a gain parameter 5. Analyzing stability from a Nyquist plot 6. Designing a controller to meet specifications for ramp error constant and phase margin from a given Bode diagram

Uploaded by

magsina
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Linear Control Final Exam Time : 180 Minutes 1- State equation of a system follows.

& x1 = kx1 ax2 & x2 = bx1 hx2 System has no input. a) What are the requirement on a, b, h, k for the system such that any initial condition, at t = leads to x1 (t ) = x2 (t ) = 0 . b) Determine the transition matrix when a = b = 2 , h = 3 and k = 1 . c) Determine x1 (t ) and x2 (t ) when a = b = 2 , h = 3 , k = 1 and x1 (0) = x2 (0) = 10 2- Find transfer function or transfer functions corresponding to each figures:

3- Consider the following system.


+ -

Gc (s )

G(s)

s +1 is a lag controller and step response of compensated system and uncompensated s + 0.25 system follows. Gc ( s ) =

a) It seems that controller destroy the performance, explaine this point quantitively. b) If the controller remove from the series position and put in feedback position (point A) , draw the step response of new system and explain the reason for it. Solution:

4- Consider the following system.


+ K G(s)

Root loci of system ( K > 0 ) follows.

a) Discuss the stability and number of right half plane roots of the closed loop transfer function for various K.

b) Choose the value of K such that the dominant roots of system has = 0.707 . c) Show that setting the value of K for step error constant equal to 25 leads to an unstable system. d) Design a lag controller such that the dominant roots of system has = 0.707 and the step error constant equal set to 25. e) Design a controller such that the steady state step error set to zero and the dominant roots of system has = 0.707 . 5- Consider the following system.
+ K G(s)

Nyquist plot coresponding to solid line of Nyquist path follows ( K = 1 ). j

.
*

s plane

G (s )

Discuss the number of right half plane roots of the closed loop transfer function for various K. 6- Bode diagram of a system with ramp error constant of 1 follows.

a) What is the gain margin and phase margin of this system? b) Design a controller to have ramp error constant of 10 and phase margin 45 o . c) Draw the compensated Bode diagram. Solution:

You might also like