Scribd
Upload
34 views1 page

Via ARTiGO Assembly Guide-Wireless Kit - 20080602

The document provides installation instructions for an ARTiGO Wireless Kit in 8 steps: 1) Install the wireless module onto the inner bracket using two M2x3mm screws. 2) Separate the connectors on the No. 1 USB cable. 3) Insert the white end of the wireless module cable into the wireless module and the black end into the separated No. 1 USB cable connector. 4) Insert the antenna cable into the wireless module and enclosure. 5) Install the EPIA PX mainboard onto the inner bracket using one M2x3mm screw and three M2x15mm screws. 6) Install the cables for the front panel, audio

Uploaded by

err45
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views1 page

Via ARTiGO Assembly Guide-Wireless Kit - 20080602

The document provides installation instructions for an ARTiGO Wireless Kit in 8 steps: 1) Install the wireless module onto the inner bracket using two M2x3mm screws. 2) Separate the connectors on the No. 1 USB cable. 3) Insert the white end of the wireless module cable into the wireless module and the black end into the separated No. 1 USB cable connector. 4) Insert the antenna cable into the wireless module and enclosure. 5) Install the EPIA PX mainboard onto the inner bracket using one M2x3mm screw and three M2x15mm screws. 6) Install the cables for the front panel, audio

Uploaded by

err45
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ARTiGO Wireless Kit Installation Guide

Assembling Accessories - Wireless Kit


Wireless Kit Package
*(1) Wireless module (1 pcs) (5) Wireless module cable (1 pc)

4) Insert Antenna Cable


i - Insert antenna cable upon wireless module and enclosure.

*(2) M2x3mm screws (2 pcs)

(6) USB black housing (1 pc)

*(3) Antenna (1 pc)

*(4) Antenna cable (1 pc)

Note: Items (1) (2) (3) (4) are not included in standard ARTiGO Box. Required Tools (Not included) All you need to assemble this unit are one Phillips Screwdriver, one 8m/m 6-point socket wrench and antistatic gloves.

5) Install EPIA PX Mainboard to Inner Bracket


i - Place EPIA PX mainboard on top of inner bracket. ii - Fasten board to bracket by one M2x3mm and three M2x15mm screws.

A
1) Install Wireless Module
i - Insert wireless module upon Inner bracket as shown. ii- Secure wireless with two M2x3mm screws.

M2x3mm screw (x1)

B
M2x3mm screw (x2)

M2x15mm screw (x3)

Note: Please follow ARTiGO Assembly Guide or ARTiGO SATA HDD Assembly Guide to insert DDR2 533MHz SO-DIMM memory module(256MB~1GB) on the Mainboard before this step.

6) Install Cables of Front Panel/Audio/USB

Note: Please follow the ARTiGO Assembly Guide or ARTiGO SATA HDD Assembly Guide to install 2.5-Inch HDD before this step.

Front Panel

2) Separate No.1 USB Cable connector


i - Separate connectors as shown.

USB

Audio

7) Install Antenna
No.1 No.4 No.3 No.2

i - Install antenna into enclosure.

3) Insert Wireless Module Cable


i - Insert white housing to wireless module. ii- Insert black housing to No.1 USB cable connector as shown.

8) Obstruct No.1 USB Port.


i - Obstruct No.1 USB port with USB black housing.

No.4 No.3

No.2 No.1

Note: Only 3 USB ports can be used when you install wireless module.

All of photos on ARTiGO Wireless Kit are for reference.

ARTiGO Wireless Kit Installation Guide

You might also like