Modular Sony HCD-GB3
Modular Sony HCD-GB3
SERVICE MANUAL
E Model
HCD-EC50
BU-K6BD83S2-WOD
KSM-213DCP
TAPE
HCD-EC50
Section
Section
SPECIFICATIONS
Amplifier section
Tuner section
CD player section
General
FM tuner section:
Tuning range: 87.5 108.0 MHz (50 kHz step)
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range: 530 1,710 kHz (with 10 kHz tuning interval)
531 1,710 kHz (with 9 kHz tuning interval)
Intermediate frequency: 450 kHz
Power requirements
Mexican model: AC 127 V, 60 Hz
Argentine model: AC 220 V, 50/60 Hz
Other models: AC 120, 220 or 230 240 V, 50/60 Hz
Adjustable with voltage selector
Power consumption: 80 W
Dimensions (w/h/d) (excl. speakers): Approx. 200 281.5 390.5 mm
Mass (excl. speakers): Approx. 5.1 kg
Design and specifications are subject to change without notice.
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
HCD-GB3
TABLE OF CONTENTS
1.
2.
GENERAL ................................................................... 4
3.
DISASSEMBLY
3-1.
3-2.
3-3.
3-4.
3-5.
3-6.
3-7.
3-8.
3-9.
3-10.
3-11.
3-12.
3-13.
3-14.
4.
5.
6.
7.
DIAGRAMS
6
7
7
8
8
9
9
10
10
11
12
13
13
14
25
26
27
28
29
30
31
32
33
34
35
36
8.
EXPLODED VIEWS
8-1.
8-2.
8-3.
8-4.
8-5.
9.
45
46
47
48
49
HCD-GB3
SECTION 1
SERVICING NOTES
Notes on chip component replacement
Never reuse a disconnected chip component.
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270 C
during repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering
or unsoldering.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
Unleaded solder melts at a temperature about 40 C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
This appliance is classified as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT MARKING is located on
the rear exterior.
HCD-GB3
SECTION 2
GENERAL
"ASIC /PERATIONS
!DJUSTING THE SOUND
4O ADJUST THE VOLUME
0RESS 6/,5-% n ON THE REMOTE OR TURN THE
6/,5-% CONTROL ON THE UNIT
4O ADD A SOUND EFFECT
XT
XB
X
4O
0RESS
'ENERATE A MORE DYNAMIC
SOUND $YNAMIC 3OUND
'ENERATOR 8
TRA
$3'8 ON THE UNIT
3ET THE SOUND EFFECT
%1
s 4HE MAXIMUM NUMBER OF
n FOLDERS IS INCLUDING THE ROOT FOLDER
n -0 lLES IS
n -0 lLES AND FOLDERS THAT CAN BE CONTAINED ON A SINGLE DISC IS
n FOLDER LEVELS THE TREE STRUCTURE OF lLES IS EIGHT
s #OMPATIBILITY WITH ALL -0 ENCODINGWRITING SOFTWARE RECORDING
DEVICE AND RECORDING MEDIA CANNOT BE GUARANTEED )NCOMPATIBLE
-0 DISCS MAY PRODUCE NOISE OR INTERRUPTED AUDIO OR MAY NOT PLAY
AT ALL
.OTES ON PLAYING MULTISESSION DISCS
s )F THE DISC BEGINS WITH A #$
$! OR -0 SESSION IT IS RECOGNIZED
AS A #$
$! OR -0 DISC AND PLAYBACK CONTINUES UNTIL ANOTHER
SESSION IS ENCOUNTERED
s ! DISC WITH A MIXED #$ FORMAT IS RECOGNIZED AS A #$
$! AUDIO
DISC
RM
0LAYING A #$-0 DISC
3ELECT THE #$ FUNCTION
0RESS #$ ON THE REMOTE OR &5.#4)/. ON THE
REMOTE REPEATEDLY
,ISTENING TO THE RADIO
3ELECT h&-v OR h!-v
0RESS 45.%2"!.$ REPEATEDLY
3ELECT THE TUNING MODE
0RESS 45.).'