Scribd
Upload
214 views

Midland Acs

The document discusses electro-hydraulic valve actuators and positioners made by Midland-ACS for use in hazardous locations and severe environments. The actuators can be used for positional, modulating and stepping control of various types of valves. They are available in ring main or self-contained configurations and include explosion proof housings, hydraulic components, position transmitters and electronic positioners.

Uploaded by

wolverul
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
214 views

Midland Acs

The document discusses electro-hydraulic valve actuators and positioners made by Midland-ACS for use in hazardous locations and severe environments. The actuators can be used for positional, modulating and stepping control of various types of valves. They are available in ring main or self-contained configurations and include explosion proof housings, hydraulic components, position transmitters and electronic positioners.

Uploaded by

wolverul
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ELECTRO-HYDRAULIC VALVE ACTUATORS

FOR POSITIONAL, MODULATING AND STEPPING CONTROL OF:

CHOKE VALVES GLOBE VALVES PLUG VALVES GATE VALVES BALL VALVES BUTTERFLY VALVES
FOR HAZARDOUS LOCATIONS AND SEVERE ENVIRONMENTS

ATEX
www.midland-acs.com

WHY CHOOSE ELECTRO-HYDRAULIC ACTUATORS?


Alternative forms of electric and pneumatic actuators have always offered their own particular advantages, depending on the size of valve and the control required. Recovery of oil and gas from smaller marginal fields has forced radical changes in the design of offshore installations. The result being the demaning and reduction in the size of platforms and the introduction of FPSOs. Equipment space and weight factors have always been at a premium but now even more so. Therefore compressed air and high electrical power consuming equipment is becoming less common on installations. Midland-ACS Electro-Hydraulic Actuators provide considerably more thrust, size for size compared to electric and pneumatic actuators.

RING MAIN OR SELF CONTAINED?


Midland-ACS Electro-Hydraulic Linear Valve Actuators are the perfect solution for the control of choke and globe type control valves. They can provide high seat forces, fast stroking speeds, accurate positional, modulating and stepping control, plus fail safe modes. Midland-ACS Electro-Hydraulic Linear Valve Actuators can be connected to hydraulic RING MAIN circuits utilising hydraulic and electrical power from wellhead control or centralised hydraulic power units. Alternatively if only an electrical power supply is available integral or free standing SELF-CONTAINED HYDRAULIC POWER UNITS can also be supplied.

MIDLAND-ACS ACTUATOR CODING SYSTEM 2004 ACS 603 EEx ia P BORE ROD TRAVEL DA FSP MO RM LS1 SMART WG 603 HAZARDOUS AREA (see below) ia = INTRINSICALLY SAFE (RING MAIN ONLY) P = POSITIONING MMs MMs MMs DA = DOUBLE ACTING FSP = FAIL STAYPUT MO = MANUAL OVERRIDE (HYDRAULIC HAND PUMP) RM = RING MAIN LS1 = LIMIT SWITCH, CLOSED STANDARD ANALOG, NO CODE MINERAL OIL (NO CODE REQD) 603 IR (WITH INFARED KEYPAD FACILITY) SAFE AREA (NO CODE REQD) d = EXPLOSION PROOF M = MODULATING

UL/CSA = EXPLOSION PROOF (USA & CANADA) ST = STEPPING

BORE, ROD SIZE AND TRAVEL ARE SELECTED BY MIDLAND-ACS TO SUIT THE CLIENTS VALVE THRUST AND TRAVEL CHARACTERISITICS. SAS = SINGLE ACTING, SPRING FAIL SAFE FC = FAIL CLOSED SAA = SINGLE ACTING, ACCUMULATOR FAIL SAFE FO = FAIL OPEN

SC = SELF CONTAINED LS2 = SWITCH OPEN LS3 = CLOSED & OPEN SMART HART PROTOCOL POSITION TRANSMITTER FOR ACTUATOR FEEDBACK SIGNAL ONLY WG = WATER GLYCOL FLUID FR = FIRE RESISTANT
www.midland-acs.com

1. ELECTRONIC POSITIONER, TYPE, ANALOGUE, MICROPROCESSOR. FOR POSITIONAL, MODULATING, STEPPING AND FAIL SAFE CONTROL. POWER SUPPLY, 24 VDC 0R SINGLE & 3 PHASE AC VOLTAGES INPUT COMMAND SIGNAL, 4-20 m A, INCREASE TO OPEN OUTPUT RETRANSMISSION SIGNAL 4-20 m A, POSITIONAL ACCURACY +/- 1 % POSITIONAL REPEATABILITY +/- 1% TROPICALISED MIDLAND-ACS 603-EExd EXPLOSION PROOF VERSION, EExd IIC T6, ATEX II 2 GD, ENCLOSURE MATERIAL, MARINE GRADE ALLOY WITH OFFSHORE PAINT FINISH, IP 66 RATED MIDLAND-ACS 603-EExd EXPLOSION PROOF VERSION, EExd IIB T4/6, ATEX II 2 G/D, ENCLOSURE MATERIALS, 316 ST-ST OR CAST IRON WITH OFFSHORE PAINT FINISH, IP 65 RATED MIDLAND-ACS 603-EExd EXPLOSION PROOF VERSION, CSA, CLASS1, DIV 2, GROUP D, T3, ENCLOSURE MATERIAL, MARINE GRADE ALLOY WITH OFFSHORE PAINT FINISH, NEMA 4/IP66 MIDLAND-ACS 603IR-EExd EXPLOSION PROOF VERSION, EExd IIC T6, ATEX II 2 GD, ENCLOSURE MATERIAL, MARINE GRADE ALLOY WITH OFFSHORE PAINT FINISH, IP 66 RATED INFRARED OPTION AVAILABLE FOR LOCAL CALIBRATION WITHOUT THE NEED TO OPEN THE POSITIONER ENCLOSURE IN THE HAZARDOUS AREA. MIDLAND-ACS 603-EExia INTRINSICALLY SAFE VERSION, EExia IIC T4, ATEX II 2 G ENCLOSURE MATERIALS AVAILABLE, 316 ST-ST, WITH OFFSHORE PAINT FINISH, IP 66 RATED 2. ACTUATOR POSITION FEEDBACK TRANSMITTER,OPTIONS LINEAR OR ROTARY POTENTIOMETER LINEAR TRANSDUCER (CONTACTLESS) HART PROTOCOL DIGITAL 3. ACTUATOR OPTIONS DOUBLE ACTING, PISTON TYPE, STAYPUT, FAIL LAST POSITION SINGLE ACTING, PISTON TYPE, SPRING FAIL SAFE, OPEN OR CLOSED 1/4 TURN, SEMI-ROTARY, DOUBLE ACTING OR SPRING FAIL SAFE FAIL SAFE MODES, ON LOSS OF POWER SUPPLY, 4-20 m A COMMAND SIGNAL, HYDRAULIC SUPPLY MATERIALS AVAILABLE, CARBON STEEL/STAINLESS STEEL WITH OFFSHORE PAINT FINISH, IP 66 RATED ALL FASTNERS 316 STAINLESS STEEL, WITH OFFSHORE PAINT FINISH, IP 66 RATED.

RING MAIN ELECTRO-HYDRAULIC ACTUATORS

4. DRIVE COUPLING, DESIGNED TO SUIT CUSTOMERS VALVE STEM, 316 ST-ST, ANTI-ROTATION, WITH GRADUATED VISUAL TRAVEL INDICATOR. 5. YOKE, DESIGNED TO SUIT CUSTOMERS VALVE TOPWORK CARBON STEEL, WITH OFFSHORE PAINT FINISH. 6. MANUAL OVERRIDE, OPTIONAL, 316 ST-ST HYDRAULIC HANDPUMP. 7. ACCUMULATOR STORAGE CAPACITY, OPTIONAL CARBON STEEL, WITH OFFSHORE PAINT FINISH. 8. CONTROL PANEL, 316 ST-ST, IP66 RATED, OFFSHORE PAINT FINISH CONTAINS ALL 316 ST-ST MANIFOLDED HYDRAULIC CONTROL SYSTEM. COIL OPTIONS EExme II T4/T6, ATEX II 2 G, 1.5, 3.5 OR 8 WATT COIL OPTIONS UL/CSA CLASS 1, ZONE 1 AExme II, 1.5, 3.5 OR 8 WATT COIL OPTIONS EExia IIC T6, ATEX II 2 G, <1 WATT, (DEPENDS ON BARRIER/ISOLATOR SELECTION) UL/CSA CLASS 1, ZONE 0, Exia II, <1 WATT, (DEPENDS ON BARRIER/ISOLATOR SELECTION) EExd/e IIB T4/T6, NON-ATEX, 13/33 WATTS OPTIONS SOLENOID VALVES 316 ST-ST, LEAKTIGHT TO ENSURE NO DRIFT OF ACTUATOR POSITION M20 X 1.5 OR 1/2 NPTF CABLE GLAND ENTRY PRESSURE FILTER, SINGLE OR DUAL 5 MICRON, WITH ON-LINE ISOLATION, AND VISUAL POP UP INDICATOR. FLOW CONTROL VALVES, NEEDLE TYPE, ADJUSTABLE LOCKABLE, CHECK VALVES, PRESSURE/THERMAL RELIEF VALVES PRESSURE REGULATOR ISOLATION VALVES 9. REMOTE INDICATION SWITCHES FOR OPEN AND CLOSED POSITIONS MECHANICAL, INDUCTIVE PROXIMITY OR MAGNETIC REED TYPE, EExd/e, EExm. EExi & NAMUR SPDT, & DPDT, ALL AVAILABLE . WIRED TO 316 ST-ST JUNCTION BOX, M20 X 1.5 OR 1/2 NPTF 10. HYDRAULIC CONNECTIONS, SUPPLY AND RETURN , 1/2 NPTF 11. SUNSHADE, OPTIONAL, ST-ST PAINTED TO PROTECT COMPLETE ACTUATOR ASSY FROM DIRECT SUNLIGHT TO ENSURE THAT AMBIENT TEMPERATURES ARE BELOW + 60C, ST-ST PAINTED ADDITIONAL INFORMATION HYDRAULIC FITTINGS, 316 TWIN FERRULE , HYDRAULIC TUBING OPTIONS 316 L , OR 904L GLANDS, EExd/EExe , BRASS , BRASS/NICKEL PLATED OR 316 ST-ST PVC SHROUDS CAN BE FITTED CABLING, ARMOUR BRAIDED AND HALOGEN FREE LOCATIONS, ON/OFFSHORE HAZARDOUS AND SEVERE CORROSIVE ENVIRONMENTS HYDRAULIC SUPPLY PRESSURE RANGE FROM RING MAIN, STANDARD 90 TO 210 bar, ALSO 345 bar HYDRAULIC FLUID COMPATIBILITY, MINERAL/SYNTHETIC OILS AND WATER GLYCOLS HYDRAULIC FLUID CLEANLINESS REQUIRED, NAS 1638 CLASS 8 / ISO 4406 19/17/14 OR BETTER AMBIENT TEMPERATURE RANGE - 20 + 60 C, SPECIAL INSULATED UNITS FOR - 50 C

www.midland-acs.com

SELF-CONTAINED ELECTRO-HYDRAULIC VALVE ACTUATORS


1. EEXD MOTORISED HYDRAULIC PUMP UNIT 24 VDC & AC VOLTAGES AVAILABLE 2. STAINLESS STEEL RESERVOIR WITH PRESSURISED FILLER CAP AND SIGHT LEVEL GAUGE 3. EEXD PRESSURE SWITCHES FOR PUMP START/STOP CONTROL 4. EEXD PRESSURE SWITCH FOR LOW OIL PRESSURE ALARM 5. HYDRAULIC CONTROL PANEL 6. MANUAL OVERRIDE HYDRAULIC HAND PUMP 7. POSITION TRANSMITTER 8. LINEAR HYDRAULIC PISTON ACTUATOR DOUBLE ACTING, STAYPUT, LAST POSITION SINGLE ACTING SPRING FAIL SAFE OPEN OR CLOSED 9. ACCUMULATOR STORAGE TO MINIMISE MOTOR STOP/STARTS AND REDUCE ELECTRICAL POWER CONSUMPTION 10. EEXD ELECTRONIC POSITIONER ENCLOSURE 11. EEXD STARTER/ISOLATOR ENCLOSURE WITH LOCAL AND REMOTE OPERATION & ALARM FACILITY. 12. EEXD LOW OIL SWITCH 13. EEXD OIL TEMPERATURE PROBE NOTE: POWERUNIT AND INSTURMENTATION CAN BE MOUNTED SEPERATELY TO THE ACTUATOR ON A FREE STANDING SKID OR FRAME

Midland-ACS Patrick Gregory Road Wolverhampton WV11 3DZ, United Kingdom Tel: +44 (0) 1902 305678 Fax: +44 (0) 1902 305676 Email: [email protected] Web: www.midland-acs.com

Midland-ACS North America P.O. Box 422 Grimsby, Ontario L3M 4H8, Canada Tel: +1 (905) 309-1834 Fax: +1 (905) 309-1835 Email: [email protected] Web: www.midland-acs.com

www.midland-acs.com

You might also like