Scribd
Upload
670 views

How To Measure 1 Piece

The document provides instructions for measuring a drive shaft for a vehicle, including measuring the length from the transmission to the rear end and determining if the rear end yoke is outside or inside clip style. It lists common measurements for the distance from the yoke to the U-joint and from the U-joint to the transmission output shaft for different vehicle models.

Uploaded by

scimaging86
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
670 views

How To Measure 1 Piece

The document provides instructions for measuring a drive shaft for a vehicle, including measuring the length from the transmission to the rear end and determining if the rear end yoke is outside or inside clip style. It lists common measurements for the distance from the yoke to the U-joint and from the U-joint to the transmission output shaft for different vehicle models.

Uploaded by

scimaging86
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Measuring For a 1 Piece Drive Shaft

Measuring for Length of Drive Shaft

129 E. 21st Street | Bakersfield, CA Phone: (661)633-2303 | Fax: (661)633-9169

WWW.

Performance Industries

ALLDRIVELINES.COM

A X

A - is the distance between the transmission seal and the tip of rear end yoke. A=___________________ X - is how far the tail shaft sticks out of the transmission. X=___________________

You first need to determine if you have Outside Clip or Inside Clip End Yoke (Note - Outside Clip will have a Tab, Inside Clip will not)

Measuring for U-Joint

Outside Clip End Yoke


Note: If you do not come up with one of the following measurements, then you need to look for wear at E.

E D
Outside Clip Tab

E = 3-7/32 E = 3-7/32 E = 3-5/8 E = 3-5/8 E = 3-5/8 E = 4-3/16 E = 4-3/16 E = 4-31/32

D = 1-1/16 D = 1-1/8 D = 1-1/16 D = 1-1/8 D = 1-3/16 D = 1-3/16 D = 1-3/8 D = 1-3/8

Inside Clip End Yoke

A = 2-1/8 7260 A = 2-5/8 7290 A = 2-9/16 3R A = 1-1/2 1000

You might also like