Scribd
Upload
468 views

Ergonomics Lab Manual

The document is a lab manual for an ergonomics lab experiment to measure sound levels on a college campus using a digital sound level meter. It describes the objective of determining sound levels, lists the apparatus as a digital noise meter, and provides specifications of the meter. It also gives background on units of sound measurement, defines noise, and describes some effects of noise on performance. The procedure involves turning on the meter, placing it in locations for 10 seconds to observe and note sound level values.

Uploaded by

wellwisher01
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
468 views

Ergonomics Lab Manual

The document is a lab manual for an ergonomics lab experiment to measure sound levels on a college campus using a digital sound level meter. It describes the objective of determining sound levels, lists the apparatus as a digital noise meter, and provides specifications of the meter. It also gives background on units of sound measurement, defines noise, and describes some effects of noise on performance. The procedure involves turning on the meter, placing it in locations for 10 seconds to observe and note sound level values.

Uploaded by

wellwisher01
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Ergonomics Lab

Lab Manual

ERGONOMICS
Submitted by: Sami ullah Habib Regd. No. 2009-IME-107 Submitted To: Sir Ubaid Ur Rehman

Rachna College of Engineering & Technology, Gujranwala.

Ergonomics Lab

Experiment No. 01
Objective:
To determine the sound levels of different places of the campus using digital sound level meter.

Apparatus:
Digital Noise Meter

Theory:

a) Digital Noise Meter:


It is an instrument use to determine the sound level of a location.

b) Specifications of Digital Noise Meter:


1. Resolution: 2. Overall Range:
o o

0.1 dB

30 to 130 dB "A" 35 to 130 dB "C"

3. Basic Accuracy: 1.5 dB 4. Power: 4 x AA 1.5V alkaline cells or 1 9V (6F22)

c) Sound:
Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within the range of hearing and of a level sufficiently strong to be heard, or the sensation stimulated in organs of hearing by such vibrations

Ergonomics Lab

Units of sound: 1. Bel : A logarithmic unit of sound pressure equal measured a tenth of it in decibels dB. 2. dB: The decibel (dB) is a logarithmic unit that indicates the ratio of a physical quantity relative to a specified or implied reference level. 3. sone: 4. phon 5. Mel

d) Noise:
Noise is a term often used to refer to an unwanted sound. In science and engineering, noise is an undesirable component that obscures a wanted signal.

e) Effects of noise on performance:


Elevated noise levels can create stress, increase workplace accident rates, and stimulate aggression and other anti-social behaviors.

Some examples of Sound Level:

Breathing Home Office Electric Shaver Piano Practice 65 Manual Machines Average Factory Noise Shot Gun Loudest sound possible

10 dB 50 dB 60 dB 65 dB 80 dB 100dB 120dB 194dB

Procedure:
1. 2. 3. 4. Select the place where sound level is to be measured. Then press GREEN button (ON). Then place the microphone on the selected place, for 10 sec. Observe and note the values.

Ergonomics Lab

Observation:
Sr No. 1. 2. 3. 4. 5. 6.

Location

Sound level Max. Min

Comments:

You might also like