Scribd
Upload
164 views3 pages

HP #60 Cartridge: Refill Instructions Black Cartridge

The document provides instructions for refilling HP #60 black and color cartridges. The instructions state to place the cartridge on paper towels in case of spills. Remove the top label and slowly inject ink using a syringe into the center hole for black cartridges or each chamber for color cartridges. Leave the top label off after filling and run cleaning cycles or print test pages to allow the ink to saturate the sponge.

Uploaded by

Adan Perdomo Romano
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
164 views3 pages

HP #60 Cartridge: Refill Instructions Black Cartridge

The document provides instructions for refilling HP #60 black and color cartridges. The instructions state to place the cartridge on paper towels in case of spills. Remove the top label and slowly inject ink using a syringe into the center hole for black cartridges or each chamber for color cartridges. Leave the top label off after filling and run cleaning cycles or print test pages to allow the ink to saturate the sponge.

Uploaded by

Adan Perdomo Romano
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

HP #60 Cartridge Refill Instructions Black cartridge

Instructions 1. Put the cartridge on some paper towels in an area where you can tolerate a spill. 2. Peal off the top label. 3. Fill the syringe with 10ml of black ink for #60 or 20ml of black for #60XL 4. Very S-L-O-W-L-Y inject ink into the center hole. 5. When finished leave the top label off and the filling holes exposed (when printing it has to pull in air). 6. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions. Or print the following pages: http://www.refillinstructions.com/black.htm for Black For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge. Note: The #60 has a smaller sponge than the #60XL
A Refill Kit should include Ink plus the following: One 10cc Syringe

HP #60 Cartridge
Refill Instructions for HP Color cartridge

Instructions 1. Put the cartridge on some paper towels in an area where you can tolerate a spill. 2. Peal off the top label. 3. Fill the syringe with 6 ml. of color ink. 4. Very S-L-O-W-L-Y inject ink into each chamber until the sponge full. A little ink might come out of the top when full, so cover up the other two holes while filling one. 5. When finished leave the top label off and the filling holes exposed (when printing it has to pull in air). 6. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions. Or print the following page: http://www.refillinstructions.com/color.htm For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge.
A Refill Kit should include Ink plus the following:

Three 10cc Syringes

You might also like