0% found this document useful (0 votes)
15 views

Microcontroller Based Digital Code Lock (AT89C2051)

This document describes a microcontroller-based digital code lock system using an AT89C2051 microcontroller. The system allows only authorized persons to access restricted areas by entering a password on a keypad. The password is stored in an EPROM that can be changed. If an incorrect password is entered more than three times, an alarm is activated. The microcontroller controls the system and relay to open the door when the correct password is entered.

Uploaded by

sunny570
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
15 views

Microcontroller Based Digital Code Lock (AT89C2051)

This document describes a microcontroller-based digital code lock system using an AT89C2051 microcontroller. The system allows only authorized persons to access restricted areas by entering a password on a keypad. The password is stored in an EPROM that can be changed. If an incorrect password is entered more than three times, an alarm is activated. The microcontroller controls the system and relay to open the door when the correct password is entered.

Uploaded by

sunny570
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

ABSTRACT

MICROCONTROLLER BASED DIGITAL CODE LOCK (AT89C2051)


Security is a prime concern in our day-today life. Everyone wants to be as much secure as possible. An access control for doors forms a vital link in a security chain. The microcontroller based digital lock for Doors is an access control system that allows only authorized persons to access a restricted area. The system is fully controlled by the 8 bit microcontroller AT89C2051 which has a 2Kbytes of ROM for the program memory. The password is stored in the EPROM so that we can change it at any time. The system has a Keypad by which the password can be entered through it. When the entered password equals with the password stored in the memory then the relay gets on and so that the door is opened. If we entered a wrong password for more than three times then the Alarm is switched on. YASMIN MOHAMMAD M. E ( E.C.E ) ESVLSID 1602-09-744-018 Under the guidance of Ms. VIBHA KULKARNI

http://www.mindstien.com/seminar/electronics-engineering/project-password-based-doorlocking-system-at89c2051.html

You might also like