0% found this document useful (0 votes)
593 views

Line Sizing

This document contains a line sizing spreadsheet for an ammonia refrigeration system. It provides specifications for various piping components including suction lines, liquid lines, defrost lines, condenser piping, thermosiphon piping, and vessel vent sizing. Key parameters listed include pipe diameter, pressure drop per 100 feet of pipe, and maximum velocity. The spreadsheet complies with guidelines in ASHRAE RP-185 for properly sizing refrigerant piping.

Uploaded by

ayuzme123
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
593 views

Line Sizing

This document contains a line sizing spreadsheet for an ammonia refrigeration system. It provides specifications for various piping components including suction lines, liquid lines, defrost lines, condenser piping, thermosiphon piping, and vessel vent sizing. Key parameters listed include pipe diameter, pressure drop per 100 feet of pipe, and maximum velocity. The spreadsheet complies with guidelines in ASHRAE RP-185 for properly sizing refrigerant piping.

Uploaded by

ayuzme123
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LINE SIZING SPREADSHEET

PER ASHRAE RP-185

Compliments of Nigel Andrews - Freeze-Pro, Inc.


Project Name
P&I diagram point

TO:
FROM:
REF:

5/16/02 19:27
Jeff Welch

REV 2-1-00

Saturated Suction Temperature


Condensing/Liquid Temperature
Tons

12
95
500

Lbs/Hour
Lbs/Minute

12882.9
214.7
AMMONIA

SINGLE PHASE LINES


Suction Line Max. P/100'
T/100'
Nom. Dia P/100'
8
0.18
0.20
10
0.06
0.06
12
0.02
0.03

Liq Line Max P/100'


0.5
P/100'
Velocity Nom. Dia
72.1
2
1.13
45.8
2-1/2
0.33
32.2
3
0.11

LIQUID OVERFEED LINES

DEFROST LINES

Recirculation Rate
Mass flow Lbs/Min.

Supply Pressure, Psig


Sat. Temp, deg F
Actual gas temp, F

3
536.4

2 PH Suction Max. P/100' *


T/100'
Nom. Dia P/100'
8
0.37
0.41
10
0.12
0.13
12
0.05
0.05

R'circ. Liq Max. P/100'


0.5
P/100'
Velocity Nom. Dia
60.5
2-1/2
1.78
38.4
3
0.59
27.0
4
0.15

2
Velocity
4.8
2.9
1.9

151.8
85
150
2
Velocity
6.59
4.27
2.48

Discharge gas temperature


Discharge Line Max. P/100'
P/100'
Nom. Dia
4
5
6

1.67
0.52
0.20

Total Defrost Tons


Hot Gas flow multiplier
Lbs/ Minute
Defrost Line Max. P/100'
P/100'
Nom. Dia
4
0.52
5
0.16
6
0.06

CONDENSER PIPING
Number of cond. In/out pairs

Inlet per coil


Outlet per coil
Max. P
2
Mx Vel FPM
Nom. Dia P/100'
Nom. Dia
2-1/2
1.83
2
3
0.59
2-1/2
4
0.15
3

100
FPM
82.8
51.1
33.1

(ie. For 1 coil inlet & outlet; enter 1)


Outlet header
Mx Vel FPM
150
Nom. Dia
FPM
3
132.4
4
76.9
5
48.9

Equalizer
Max. P
Nom Dia
1
1-1/4
1-1/2

1.4
P/100'
0.968
0.212
0.091

THERMOSIPHON PIPING AND HORIZONTAL VESSEL


Thermosiphon MBH
Overfeed rate
Lbs/Minute, Sat.flow

1000
4
34.54

Thermosiphon Supply
Max. P
0.1
Nom. Dia P/100'
Velocity
3
0.05
1.2
4
0.01
0.7
5
0.00
0.5

5 Minute volume
Vessel Dia., in
Required Length, ft
Vel. FPM @ 50% full
Thermosiphon Return *
Max. P
0.5
Nom.Dia P/100'
Velocity
4
0.16
10.5
5
0.05
6.7
6
0.02
4.6

Vent
Max. P
Nom.Dia
3
4
5

4.7
30
1.9
21.6

0.2
P/100'
0.15
0.04
0.01

* Two phase pressure drop estimated by Beattie method. Use with judgement. See README page.
Tel: 904-269-3130
Fax: 904-269-4223
336 Milwaukee Avenue
Orange Park, Fl 32073

180
2
Velocity
77.2
49.1
34.0

100
3
111.9
2
Velocity
45.1
28.7
19.9

You might also like