Scribd
Upload
43 views

A Mobile Based Home Automation System and Energy Saving System

This document describes a mobile-based home automation and energy saving system. The system uses an embedded controller and GSM module to allow a mobile phone to control electrical devices and appliances in a home or industry remotely using AT commands. A relay driver unit is used to switch devices on and off based on commands received from the mobile phone via the GSM network and embedded controller. The system aims to automate home and industry applications and save energy by allowing remote control and monitoring of devices from a mobile phone.

Uploaded by

karunamoorthi
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
43 views

A Mobile Based Home Automation System and Energy Saving System

This document describes a mobile-based home automation and energy saving system. The system uses an embedded controller and GSM module to allow a mobile phone to control electrical devices and appliances in a home or industry remotely using AT commands. A relay driver unit is used to switch devices on and off based on commands received from the mobile phone via the GSM network and embedded controller. The system aims to automate home and industry applications and save energy by allowing remote control and monitoring of devices from a mobile phone.

Uploaded by

karunamoorthi
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

A MOBILE BASED HOME AUTOMATION SYSTEM AND ENERGY

SAVING SYSTEM

ABSTRACT:

Embedded system is the one of the firmware that is combination of

software and hardware. Here the software is encapsulated in the hardware. In

embedded system entire hardware is monitored and controlled by the software

which is developed by the programmer/user. This technology reduces the cost and

size of the devices. It also reduces the manual operation; finally it gives the

automation products such as Home Appliances, Security systems, Satellite,

Industries Automation and etc,

Now a days to improve the efficiency of the process, people uses some

new technologies, like RTOS (Real Time Operating System which gives

deterministic and multitasking facilities), PROTOCOLs (such as I2C, SPI, CAN,

LIN and TCP/IP which increase the speed of the process).

Major part of this Project is Embedded controller, GSM, &

Mobile. Here Mobile act as an Administrator. Mobile can be controlled by

Certain things such as all Electronics and Electrical devices in industry


Through AT commands. Previous days it’s not possible to control through

Mobile. Nowadays it’s possible because of GSM.

BLOCK DIAGRAM:

DEVICE 321
POWER SUPPLY
UNIT
RELAY
DRIVER
UNIT

USER

Three Phase

HOME/INDUSTRY
DESCRIPTION:

In our project “A MOBILE BASED HOME

AUTOMATION SYSTEM AND ENERGY SAVING SYSTEM”, Mobile

phones may support many additional services and accessories, such As SMS for

text messaging, Bluetooth, infrared, camera with video recorder and MMS for

sending and receiving photos &videos. By using this mobile sends the instant

message to the GSM. GSM is the main thing to use this project.GSM is a cellular

network, which means that mobile phones connect to it by searching for cells in the

immediate vicinity. GSM receives the messages and send directly to the embedded

controller. Embedded controller receives the messages. Embedded controller can

controlled through AT commands corresponding to devices on the home/industry

applications.

HARDWARE REQUIREMENT:
➢ Microcontroller
➢ GSM
➢ Power supply Unit
➢ Display unit
➢ Mobile

SOFTWARE REQUIREMENT:
➢ KEIL-C Cross Compiler
➢ uc-FLASH Hex Up-loader

You might also like